Flow Internet Thread

[brickman]

Been good with flow for a really long time now but about 2 weeks ago digicel started working the poles & doing installations like mad in bemont & i've started to get disconnects & speed drops.Find it kinda suspect.

[lchan485]

Yeah , seeing the all out Digicel play attacks in Belmont lolo. But still with flow for now

[felix]

IS IT POSSIBLE TO USE AN AFTERMARKET OR THIRD PARTY MODEM INSTEAD OF THE MODEM SUPPLIED BY FLOW

[bossmann]

IS IT POSSIBLE TO USE AN AFTERMARKET OR THIRD PARTY MODEM INSTEAD OF THE MODEM SUPPLIED BY FLOW

No. Been discussed in the thread before

[EFFECTIC DESIGNS]

Is flow working like complete ass for anybody else?

This is on a 60mb connection Piarco Area

[lchan485]

Is flow working like complete ass for anybody else?

This is on a 60mb connection Piarco Area

Yeah was good all d time ,two weeks on Avs had little problems, as I reach home was getting that same slow speed. But speed test in Trinidad right up. Can't stream kodi good but Netflix working 1080p. When your problem started?

[MaxPower]

Flow fuggin up tonight..

[EFFECTIC DESIGNS]

^^ My problem started earlier today maybe 3 PM might even be earlier who knows.

[lchan485]

Hope it doesn't go in to d weekend , off this weekend.
Wounded if Massy or Digi get same problems too

[EFFECTIC DESIGNS]

Hope it doesn't go in to d weekend , off this weekend.
Wounded if Massy or Digi get same problems too

Say what as bad as it is here, just imagine places like India they still using dial up there and DSL costs as much as a house and none of it works. So we eh too badly off one time.

[lchan485]

True price not bad. Just consistency. Speed like it back here now

[EFFECTIC DESIGNS]

Yup my speed back, 40mb reading but that more than good enough for me.

[mojosodope]

Yeah pretty bad past couple weeks for me... real inconsistent speeds.

[m@x]

Question - I have flows arris modem (old one), when i connect the modem straight to the laptop via ethernet cable, i am getting no internet, however when i run the same cable to my cisco router and then from one of the ciscos router ports, run another cable to my laptop, it works. I would like to know why i cant connect directly to flows modem bypassing the cisco router. Thanks

[lchan485]

Question - I have flows arris modem (old one), when i connect the modem straight to the laptop via ethernet cable, i am getting no internet, however when i run the same cable to my cisco router and then from one of the ciscos router ports, run another cable to my laptop, it works. I would like to know why i cant connect directly to flows modem bypassing the cisco router. Thanks

Flow modem may have the Mac address of the cisco router lodged. Try holding down Flow modem reset for 30 sec to release Mac address . let it boot up with the laptop connected to it, should give an IP to laptop Mac..you would have to do that every time or connect to a router

[m@x]

thanks will try it an see

[lchan485]

Has anyone gotten to Change DNS setting in Flow moca router. It takes the setting, but seems to be overridden with Flow DNS

[mojosodope]

Has anyone gotten to Change DNS setting in Flow moca router. It takes the setting, but seems to be overridden with Flow DNS

The moca router kinda funny. If you're using your own wireless router DMZ it from the Moca and set your custom DNS on that. Should work. Refer to the post linked on the first page.

[lchan485]

Has anyone gotten to Change DNS setting in Flow moca router. It takes the setting, but seems to be overridden with Flow DNS

The moca router kinda funny. If you're using your own wireless router DMZ it from the Moca and set your custom DNS on that. Should work. Refer to the post linked on the first page.

I have tried that on both routers . one is DMZ through the Flow but on an unblocker check it would Fail the test.

[mojosodope]

What test like a DNS check on Netflix ? If it's Netflix they cracked down on most vpns and dns modifiers so it would fail regardless. If it's a porting situation make sure to port forward on our router after you've DMZed it. Remember you have to set your beginning dhcp address allocation pool on the moca router for say 192.168.1.10 for example and then set the static dmz for a number below the range, so 192.168.1.1 static on the modem and router.

[Bosse]

Seasons greetings fellas!

Am having trouble setting up my lorex security system with flows arris router.

It worked fine with TSTT router but don't know why it's not showing on flow

Anyone can help?

[matix]

Put a secondary router.

[Bosse]

Put a secondary router.

I have an apple AirPort Extreme connected to it but not too sure on how to do this

[lchan485]

What test like a DNS check on Netflix ? If it's Netflix they cracked down on most vpns and dns modifiers so it would fail regardless. If it's a porting situation make sure to port forward on our router after you've DMZed it. Remember you have to set your beginning dhcp address allocation pool on the moca router for say 192.168.1.10 for example and then set the static dmz for a number below the range, so 192.168.1.1 static on the modem and router.

The Dns fails when testing on unblocking site test. I haven't changed any settings on the moca, just let it assign a dhcp to the other router then what ever was that Ip I then set it in Dmz

[Bosse]

Does flow have a internal firewall? Cause am trying to find my port but it showing up

I did disable the one on the arris modem

[bossmann]

Does flow have a internal firewall? Cause am trying to find my port but it showing up

I did disable the one on the arris modem

What port are you trying to find?

[Bosse]

Port 80

[Bosse]

Can anybody help?

[mojosodope]

Port 80 is usually blocked from flow's side. For DVR etc I just use 85 and port forward to that

[Bosse]

Port 80 is usually blocked from flow's side. For DVR etc I just use 85 and port forward to that

Thanks for your help

I did change the port to 85 but it's saying now connection refused