TriniTuner.com | Latest Event:
Moderator: 3ne2nr Mods
Knight1 wrote:^^So why not GTX @ the required viscosity?
venum wrote:Knight1 wrote:^^So why not GTX @ the required viscosity?
on a new model engine like that , I would only use synthetic, in teh right viscosity
because of the additives and because it is a better oil than mineral
whoever has a different opinion about synthetic vs mineral can just keep it
does GTX have a synthetic offering
Knight1 wrote:Why would you use a synthetic oil in that engine? Why not recommend Motul then, as it's rated as being better than most synths out there?
Knight1 wrote:What additives are you referring to also? Also, do you think that a non-highly strung engine of that Lancer's nature can have NOTICEABLE benefits from a synth oil, as opposed to a well made mineral oil?
Knight1 wrote:Lastly, does the owner's manual specifically call for synthetic oil? AFAIK, once the oil meets the req'd API specifications (SL/SM etc), the oil will do what it's supposed to in terms of oxidation resistance and other properties. The added "additives" you're referring to with synthetics help withstand shear loss and breakdown over extended mileage, but will not provide much benefits to an engine of this nature other than that....
Knight1 wrote:and even that "extended mileage" factor is a moot point if you choose to run the OE change interval - which is a good choice IMHO.
Knight1 wrote:My 2c. - stick to the OE change interval, and use a mineral/blend/whatever-fits-your-budget oil IMHO. Don't waste money on something uber-expensive that isn't going to provide tangible benefits, long or short term.
Knight1 wrote:It's just a case of people buying the most expensive oil they can thinking that they're doing some good.....like when folks put in AMSOIL Series 2000 racing oil and a K&N drop in filter in their Almera/B15/Corolla and state how faster and smoooooooother it feels![]()
Knight1 wrote:The only way you can determine which oil is BEST for your application, is by running some spent oil analyses (which used to be done locally btw) - and comparing which yields a noticeabel change in wear metals and loss of visc.
Since no one does that, then everyone falls prey to marketing strategy.
Knight1 wrote:Me personally, I would have used Castrol GTX bar none in most N/A cars on our markets, especially if it isn't a high revving engine, and there's been no evidence (oil analysis not withstanding)
as they don't seem to hold up as well in turbocharged Subaru apps. Keep in mind the OE manual for the WRX doesn't call for a synthetic oil either.
Agreed - Shell Blending Plant in Pt. Lisas does oil analysis, not sure if they do it for small jobs liek car engines, mostly on a contractual basis
falling prey to a marketing strategy - no
also, keep in mind that teh fuel that we get isn't exactly teh best and as a result the combustion of poor grade fuel will introduce contaminants in the engine, that you will need some cleaning agents for - case in point - local diesel fuel vs European diesel (we taling about gas, but the same applies, just not as grand a scale)
it will be a waste if you change it prematurely - before it's capabilities are expended
Users browsing this forum: No registered users and 1 guest