Flow
Flow
TriniTuner.com  |  Latest Event:  

Forums

[b]D15B 3stage vtec prob.[/b]

Fit, Civic, Integra, CR-V, Accord, Legend - Do NOT post FS or WTB here!!!

Moderator: 3ne2nr Mods

User avatar
hatch back snail
Riding on 13's
Posts: 6
Joined: April 15th, 2009, 1:55 pm
Location: P/Town

[b]D15B 3stage vtec prob.[/b]

Postby hatch back snail » March 31st, 2010, 7:17 pm

Guys, i did a conversion a while back and i've been trying all sorts of things to get the engine running properly,idling bad,vtec working on and off etc.I heard about (1) changing the ecu i have (P2J) to P08 and (2) installing a vtec controller.Can anyone shed some light as to if either of the 2 will work?

apool69
Street 2NR
Posts: 33
Joined: July 25th, 2008, 8:05 pm
Contact:

Postby apool69 » March 31st, 2010, 10:43 pm

check your oil that happen 2 my car 2

User avatar
turbochinee
3NE 2NR for life
Posts: 159
Joined: July 23rd, 2004, 10:56 am

Postby turbochinee » March 31st, 2010, 11:01 pm

Check your IACV. If you converted from auto to manual, you will need to change the IACV to the 2 wire IACV instead of your 3 wire.

User avatar
hatch back snail
Riding on 13's
Posts: 6
Joined: April 15th, 2009, 1:55 pm
Location: P/Town

Postby hatch back snail » March 31st, 2010, 11:52 pm

Oil is ok,but will check the IAVC in the morning.By chance anyone have a price on the IAVC? Thanks.

User avatar
Sky
punchin NOS
Posts: 4121
Joined: September 1st, 2006, 10:30 pm
Location: BRRAAAPP!!!

Postby Sky » April 1st, 2010, 7:50 am

Also check for a vacum leak in the IM. I didn't need to change my IACV in the same situation. Mechanic adjusted until it worked. You may not be so lucky though.

User avatar
unciviclized
Street 2NR
Posts: 52
Joined: March 17th, 2010, 2:59 pm

Postby unciviclized » April 1st, 2010, 11:06 am

Low oil pressure/level, and failed vtec solenoid would be the 2 most common culprits. Another would be no speed signal going to the ECU, but I believe that would trigger a check engine light.

I had that prob and i just changed the speed sensor myself and its working perfect now.

User avatar
Rooki3
TriniTuner 24-7
Posts: 7219
Joined: December 18th, 2008, 10:52 pm

Postby Rooki3 » April 1st, 2010, 1:22 pm

turbochinee wrote:Check your IACV. If you converted from auto to manual, you will need to change the IACV to the 2 wire IACV instead of your 3 wire.

User avatar
Honda_Crew
3NE 2NR for life
Posts: 152
Joined: April 11th, 2008, 7:40 pm
Contact:

Postby Honda_Crew » April 1st, 2010, 1:51 pm

P08 Ecu would not be able to activate the first vtec soloniod. Keep the
P2J unless you have a way in which you could work around this.
Installing a piggy back sometimes may eliminate your vtec problems
but may cover up more serious problems like low oil pressure.
And your poor idle maybe due to your idle valve to the back of the throttle body, it may just need servicing.

User avatar
hatch back snail
Riding on 13's
Posts: 6
Joined: April 15th, 2009, 1:55 pm
Location: P/Town

Postby hatch back snail » April 1st, 2010, 6:57 pm

Thanks for all the info. guys,i had a real fun day :evil: going from street concepts to autonation as well as other places .In the end finally got a diagnostic done to realise it was the TB sensor which had a too high voltage(1.79 V).Got the sensor changed (new .5 V) and well for now it looks like everything ok,no check engine light on,idling ok,vtec working.Thanks for all the help guys.

User avatar
Damien
punchin NOS
Posts: 3093
Joined: April 11th, 2007, 3:51 pm

Postby Damien » April 1st, 2010, 8:19 pm

Nice :!:

Advertisement

Return to “HONDA”

Who is online

Users browsing this forum: No registered users and 1 guest