TriniTuner.com | Latest Event:
Moderator: 3ne2nr Mods
nope i think i saw that in edoos for 6k.Calor wrote:Is this a good price?
sMASH wrote:nope i think i saw that in edoos for 6k.Calor wrote:Is this a good price?
adnj wrote:If it is a typical walk behind, nearly all models made in the US are built by MTD in Ohio. There is also Ariens, Toro and Honda are very reliable. I prefer Honda but they are pricey. There are new small engines being shipped in from Chinese manufacturers that are a hit or miss. Good designs but quality is dependent on the seller.fokhan_96 wrote:Looking to buy a gas lawn mower. Any recommendations? Any brands to stay away from.
If you are getting a commercial mower for a big yard or play field, Gravely (owned by Ariens) and John Deere are probably worth the $40K price tag.
MG Man wrote:my experience with the tool place in Chase Village close to the triangle:
Cluefuckingless
I drop my craftsman impact driver to repair. It can't even run up wheel nuts. It just starts impacting at the slightest resistance
So I drop it and explain the scenario to him
A week later, he eh check it yet
No scn
Another week passes, I call back
Yeah nothing wrong with it. It working real good
How you test it?
I put the head in a vice and pull the trigger, and it impacting, so nuttn to fix.....
So I went today to pick it up and I ask him again what wrong with it
He say it working real good
I explain to him I can hold a socket on the end with my bare hands, pull the trigger and it won't even spin, it just starts impacting
Man says yeah, well it supposed to impact when it gets resistance
wut
I ask him how it working good if it can't break wheel nuts that are hand tight?
He say best I send it away to fix
carluva wrote:Reviving this discussion.
Where sells Toro and Honda mowers locally? Looking for a self propelled walk behind.
Also, can I import a mower? What are the requirements to do the same?adnj wrote:If it is a typical walk behind, nearly all models made in the US are built by MTD in Ohio. There is also Ariens, Toro and Honda are very reliable. I prefer Honda but they are pricey. There are new small engines being shipped in from Chinese manufacturers that are a hit or miss. Good designs but quality is dependent on the seller.fokhan_96 wrote:Looking to buy a gas lawn mower. Any recommendations? Any brands to stay away from.
If you are getting a commercial mower for a big yard or play field, Gravely (owned by Ariens) and John Deere are probably worth the $40K price tag.
carluva wrote:Reviving this discussion.
Where sells Toro and Honda mowers locally? Looking for a self propelled walk behind.
maj. tom wrote:carluva wrote:Reviving this discussion.
Where sells Toro and Honda mowers locally? Looking for a self propelled walk behind.
Not those brands but https://shopssltt.com/lawnmower-21-6-5hp-selfp
But i know it's really the engine manufacturer that you're looking for.
The mower in that pic looks like this http://gardensales.store/ which says it has a Briggs & Stratton BS775IS engine. May be worth it to check it out in-store.
. carluva wrote:Are the Troy bilt any good? If I'm not mistaken, the self propelled Troy bilt is a front wheel drive compared to rear wheel drive in the Honda.
I'll look by allied as well as contact trintrac. I was looking for a reason to go allied so looks like I found that reason
I'll post up some prices once I get em.
If it is the place that starts with R, that's strange cuz I've taken many of my personal tools there and always they always left way better that they came in. I call before I go though. The only tool I didn't get through with is a 7" dewalt grinder he couldn't get the switch for so I adapted a switch and it works okMusical Doc wrote:MG Man wrote:my experience with the tool place in Chase Village close to the triangle:
Cluefuckingless
I drop my craftsman impact driver to repair. It can't even run up wheel nuts. It just starts impacting at the slightest resistance
So I drop it and explain the scenario to him
A week later, he eh check it yet
No scn
Another week passes, I call back
Yeah nothing wrong with it. It working real good
How you test it?
I put the head in a vice and pull the trigger, and it impacting, so nuttn to fix.....
So I went today to pick it up and I ask him again what wrong with it
He say it working real good
I explain to him I can hold a socket on the end with my bare hands, pull the trigger and it won't even spin, it just starts impacting
Man says yeah, well it supposed to impact when it gets resistance
wut
I ask him how it working good if it can't break wheel nuts that are hand tight?
He say best I send it away to fix
Starts with R? If it is, he has another job so he so almost never there. Try the Dewalt store in Gulf View, I believe craftsman now falls under stanley so they may be able to check it. Call 652-4351 on Monday
You should be able to buy a quality electronic stud finder for USD25 or less.Phone Surgeon wrote:how much so for a stud finder?
just realize i need one for next week
i see amazon its 50 us for a bosch but if its the 400-500 locally i might as well buy local
Phone Surgeon wrote:what kind of tools allyuh buy recently?
bought a dewalt laser level about 2 months ago
and a dewalt 10" miter saw
bought a used compressor for $1000 few days ago, central pneumatic i think
hadda get a bradnailer and spray gun for lil home projects
Ted_v2 wrote:nervewrecker bought a Chicago pneumatic and its working out good for him, was just around 2500 , i think its a 2hp 20 18 gallon. 110v. Place in debe just by ms grocery on the left hand side. they have some decent stuff there.
https://www.northerntool.com/shop/tools/product_200375221_200375221?__cf_chl_captcha_tk__=0b1c7290d27bfe4c33484d263e4a2fc34596ba7e-1601285331-0-AQHP3mAMiUOah2DciZZC3JFib3KtTghYDk6X2WayzXVx5KYbiYb9kCGvp9i0Ij9xjX7-zRYrmQPnv82DrLdjpBiDVzdZbzCHcCs_a_1gjieLjeush3F-U14rG4STMXeD_Lrh2jBvTrJD9K6itqb_r6Ts9n2nK6seMeMVjbyGs0aDwwWJFETZPVOOp4axGtkTbmhnDg_zhKQl1AbPSBX9txiJ7LKlqGWqa1Mb5Bwwl17aGSbPaVEnXTzPvgZLVOHgH67IPTEtZifmzVSyUBut4AwY3RaEo9lnzC-qBr0LahVzvYw2SrTUcTuTsBqRsyVkr1hubRLS8zK0dez6W7kqNr6Cq0wTDHp7DgN--LNfwNoOEPwgqJ3T_ySt-3Qy99J8_II_9o0TIIoxnjSfKwtQzv1TegxR0TXuYyXP9ge5Yt2pnQUE5gGXd36Zf2HT0sXr8KzmpO6ej75Yy1s4Sm0nH6pIQFrUapFNcWfuNQjiZ93_jnq2CFEYwO6WsaiOZQRCfItg3tcsJAK-3evtRMs6pC4jL81U-VczZAcijXURMvV0
This is the best 110v compressor i ever came across, allied had it for just over 5k, i think farfan is the IR dealers too. If i could of afforded it, i would of purchased it then. this is ideal for a DIY.
nervewrecker wrote:Got it from dumore oil and gas.
Usb cable to charge it.
Has usb out to charge phones.
4 hours run time, adjustable stand.
$320.00
Can be used as a hazard light blinking in case of accident or need help.
Return to “Ole talk and more Ole talk”
Users browsing this forum: GoochMonay, matr1x, pugboy, redmanjp, Shannon and 22 guests
