:: The official TOOLS thread ::

[rspann]

The fire break would be a better idea because when all that PVC pipe melt no water gonna flow.

[Chimera]

Anyone have a cheap miter saw to sell

[speedmelter]

Anyone have a cheap miter saw to sell

Pricemart has a cheap Skil branded one

[Chimera]

I doesnt want to buy tools by psmart with their 30 day warranty

[supercharged turbo]

Where can I get pegboard and hooks to buy locally?What's the average price?

[Rovin]

^^i dunno d price but bhagwansings has that stuff ...

[Chimera]

If you mean slat board it's like 400 for a 8ft x 4 ft sheet.

The wall hooks are 10 to 24 dollars per hook depending on length

Where can I get pegboard and hooks to buy locally?What's the average price?

[Strugglerzinc]

If you mean slat board it's like 400 for a 8ft x 4 ft sheet.

The wall hooks are 10 to 24 dollars per hook depending on length

Where can I get pegboard and hooks to buy locally?What's the average price?

Pegboard has holes in it.

Last place i saw that was Nagib Elias in POS.

[supercharged turbo]

If you mean slat board it's like 400 for a 8ft x 4 ft sheet.

The wall hooks are 10 to 24 dollars per hook depending on length

Where can I get pegboard and hooks to buy locally?What's the average price?

Pegboards has holes while the slat board has horizontal grooves but I guess they're probably used interchangeably locally.

If you mean slat board it's like 400 for a 8ft x 4 ft sheet.

The wall hooks are 10 to 24 dollars per hook depending on length

Where can I get pegboard and hooks to buy locally?What's the average price?

Pegboard has holes in it.

Last place i saw that was Nagib Elias in POS.

Thanks,I"ll give them a check hopefully next week when things should be a less restrictive

[adnj]

If you mean slat board it's like 400 for a 8ft x 4 ft sheet.

The wall hooks are 10 to 24 dollars per hook depending on length

Where can I get pegboard and hooks to buy locally?What's the average price?

Pegboards has holes while the slat board has horizontal grooves but I guess they're probably used interchangeably locally.

If you mean slat board it's like 400 for a 8ft x 4 ft sheet.

The wall hooks are 10 to 24 dollars per hook depending on length

Where can I get pegboard and hooks to buy locally?What's the average price?

Pegboard has holes in it.

Last place i saw that was Nagib Elias in POS.

Thanks,I"ll give them a check hopefully next week when things should be a less restrictive

Slatboard is typically used for retail display with a wide base hanger.

Pegboard is typically used for tool set-out. There is a very wide selection of specialty "hooks" for hammers, screwdrivers, parts bins, etc.

[android79]

Can anyone point me to a good low profile 3 to 4 ton floor jack locally? Not Pricemart. Ah looking for something like a Daytona from Harbour Freight. Next thing, anyone ever skybox one? With a weight of 100 pounds what that shipping will look like? which is the best company to bring it with? etc

[trinibajan34]

Can anyone point me to a good low profile 3 to 4 ton floor jack locally? Not Pricemart. Ah looking for something like a Daytona from Harbour Freight. Next thing, anyone ever skybox one? With a weight of 100 pounds what that shipping will look like? which is the best company to bring it with? etc

Check de truck accessories place in de bamboo that owned by bobbies , saw one for $695 .

[X_Factor]

Jus make sure its a dual piston jack

[trinibajan34]

Jus make sure its a dual piston jack

This is what they have

[android79]

Jus make sure its a dual piston jack

This is what they have 20200313_131946~2.jpeg

looking good but ah find it real cheap, I have to go and see it in person.

[Dave]

All I have seen locally sub 800 look cheap. Wife bought the big pricesmart one but was too heavy to be lugging around. I returned it. Decided to rebuild mine which is over 50yrs old from my calculations. It is ridiculously simple to rebuild and the seals are very cheap i.e. if you have an old one.

If you need to buy I suggest reading Amazon reviews and sea freighting it which is what I was going to do before rebuilding.

[trinibajan34]

All I have seen locally sub 800 look cheap. Wife bought the big pricesmart one but was too heavy to be lugging around. I returned it. Decided to rebuild mine which is over 50yrs old from my calculations. It is ridiculously simple to rebuild and the seals are very cheap i.e. if you have an old one.

If you need to buy I suggest reading Amazon reviews and sea freighting it which is what I was going to do before rebuilding.

how do you rebuild them , cause i lent my grandfather mine and my uncle over pumped the jack , so now it pumps up an slowly goes back down. paid 900 in 2012 for it . Also saw floor jacks by A1 cant remember the price but i know it was more than $1000.

[Ted_v2]

for 695 thats a good deal from what im seeing, for the average single male household its perfect, ideal for little oil change and brakes and stuff, that with a pair of jack stands and yuh bad.

i have a ford racing one from pricemart, 3.5tons. i can lift those 3.2 rangers effortless, the new ones they have looks okay too, but next time around ill go with a aluminum version.

[Dave]

There are many o ring seals and a piston u cup seal for the sealing of fluid for the lifting movement. Simply take it apart and change the seals.

[trinibajan34]

There are many o ring seals and a piston u cup seal for the sealing of fluid for the lifting movement. Simply take it apart and change the seals.

Any special tools I would need to take apart ?

[Dave]

Nope not at all. Always note to drain old oil and keep all valves open to relieve any pressure inside the unit. I got all except two o ring seals from the generic kits hardwares and auto part shops carry. The u cup seal can be made locally or you measure and import them.

[rspann]

Hydraulic Components have every type of seal possible .

[*KRONIK*]

Hmmmmmm

I need a top seal for my steering rack

Hydraulic Components have every type of seal possible .

[rspann]

Yep . That too . If you cant get any seal , Trintech Chrome manufactures seals , re-chromes shafts and rebuilds Steering Racks and all hydraulic pumps and rams .

[Dave]

Hydraulic couldn't help me with the u cup but that place in Marbella will make any kind for you.

[Kronik]

Where sells kreg pocket hole screws besides Kelvin ghany? Doing some work and my screws finish, looking for 1" corse thread.

Central preferred but will go where I have to if necessary

[pugboy]

seen them by ramlagans and bhagwansinghs
not sure thread

Where sells kreg pocket hole screws besides Kelvin ghany? Doing some work and my screws finish, looking for 1" corse thread.

Central preferred but will go where I have to if necessary

[Zorak]

Where sells kreg pocket hole screws besides Kelvin ghany? Doing some work and my screws finish, looking for 1" corse thread.

Central preferred but will go where I have to if necessary

SSL, Allied and Tool House in Duncan Village

[Kronik]

seen them by ramlagans and bhagwansinghs
not sure thread

Where sells kreg pocket hole screws besides Kelvin ghany? Doing some work and my screws finish, looking for 1" corse thread.

Central preferred but will go where I have to if necessary

Last time I check ramlagan they hardly had kreg stuff, I'll check them tomorrow, if not I'll try bhagwansinghs and worst case I'll go up ghany

[rspann]

Fellas , I'm looking for a large (heavy duty ) wood chipper . Big enough to shred / chip full sized trees .

It could be engine driven , hydraulic to work off a backhoe or PTO type.