Info needed b11 hydraulic clutch setup

turboconch2 · Postby **turboconch2** » July 3rd, 2014, 7:14 am

Hey guys, anybody ever did a hydraulic clutch setup in a b11 sunny. I'm currently using cable setup on a b13 cable gearbox and wanna switch it to hydraulic. Stock clutch feels stiff already and I want to change the clutch and pressure plate to a stage 1 street. Anybody have experience with this please advise thanks.

turboconch2 · Postby **turboconch2** » July 4th, 2014, 7:23 am

Any help peeps?

Ted_v2 · Postby **Ted_v2** » July 4th, 2014, 7:32 am

Isn't the qg gearboxes hydraulic?

If yes then you can swap over the slave cylinder.
Well that's if it would work.

KIRAN-TEK · Postby **KIRAN-TEK** » July 4th, 2014, 8:33 am

but i have act hp pressure plate and act street and strip on my ga16 on my clutch softt, when the cable is inferior u have that stiff problem, see to get a good jap replacement, but if u wanna go hydro, then u may need to line up a cylinder that fits and drill hole on ur pedal for the clutch master cyliner rod

Ted_v2 · Postby **Ted_v2** » July 4th, 2014, 6:34 pm

turboconch2 · Postby **turboconch2** » July 5th, 2014, 8:35 am

Kiran you may be on to something there as I changed the cable a few years ago after it burst, maybe it stretched. Thanks for the advice. I also upgraded the booster and mc to a b14 so I would have to see if I can fit something in the space. Thanks again everyone. But I will look into the qg setup

turboconch2 · Postby **turboconch2** » July 9th, 2014, 9:27 am

Fellas, I changed the cable yesterday to a Japanese replacement ,Kiran was right, the clutch pedal feels like a hydraulic setup now as its very soft. Now looking to upgrade the clutch. Kiran where you got you're setup? was looking at the act street and strip and pp.

KIRAN-TEK · Postby **KIRAN-TEK** » July 9th, 2014, 5:04 pm

hmmm, boi i bought the disc from peak performance b4 they had jus stop market act, nick from tuner imports have in stock both clutch and pressure plate

rambo88 · Postby **rambo88** » July 10th, 2014, 1:59 am

turboconch2 wrote:Hey guys, anybody ever did a hydraulic clutch setup in a b11 sunny. I'm currently using cable setup on a b13 cable gearbox and wanna switch it to hydraulic. Stock clutch feels stiff already and I want to change the clutch and pressure plate to a stage 1 street. Anybody have experience with this please advise thanks.

jus buy a b14 cable an also check d pedal cuz sometimes rust duz hav it stiff. If u change d cable try an get some oil down in it