Some help needed

[eggman]

Ok, so i'm installing a deck in a b12 and i have to run the entire wiring because it has nothing. and i mean nothing. no wires atall. how do i go about doing this?

[MonsterPower]

get a light tester and test for a constant 12v and a switched 12v .. when u find this then connect the black wire to ground on the car chasis and then run all the speaker wires to their respective places

[eggman]

get a light tester and test for a constant 12v and a switched 12v .. when u find this then connect the black wire to ground on the car chasis and then run all the speaker wires to their respective places

and what about the remote?

[silent_riot]

Remote out to amps, ACC (switched 12v) to deck acc wire.
Illumination wire can be found with the light test as well.
Make sure to fuse those wires, as the car isn't wired or fused for radio.

[MonsterPower]

u said nuttin about amps so u wont need the remote if u dont have any ..
actually silent riot most if not all wires from the factory harness are fused for the radio .. just in most instances its coupled with either the cig lighter or door lamp