Flow
Flow
TriniTuner.com  |  Latest Event:  

Forums

cs3 lancer horn problem

Tuning advice, problems and troubleshooting

Moderator: 3ne2nr Mods

User avatar
mitsubishi_04lancer
Street 2NR
Posts: 45
Joined: March 12th, 2008, 10:48 am
Location: Caroni
Contact:

cs3 lancer horn problem

Postby mitsubishi_04lancer » April 20th, 2011, 8:33 pm

hey guys...

I just finish work, start my car...driving going down the road.. when suddenly my horn start making noise... i tap the steering an it stop.. then it started again.. an didnt want to stop.. i disconnected it..

i have check 2 electrician... they aint check nothing.. just told me i need a whole new steering...

Any help or advice on this???

User avatar
rikosher
Street 2NR
Posts: 86
Joined: August 8th, 2009, 7:10 pm
Location: everywa

Re: cs3 lancer horn problem

Postby rikosher » April 20th, 2011, 9:39 pm

it hve air bag in d steering???/ ,,if not uh cud pull out dat front piece...if it hve air bag u may need too buy a whole new steering.

do ah contunity test on d wire na...frm by d horn side n turn d steering leff n rite see wat u get.
hope uh get tru

User avatar
bcozier
3NE 2NR for life
Posts: 156
Joined: August 8th, 2007, 10:11 am
Location: South Central

Re: cs3 lancer horn problem

Postby bcozier » April 21st, 2011, 8:01 am

is the steering itself causing that problem....there is a guy in Marabella who fixes that without changing the steering....he did mine and i also sent a friend by him as well..no problems since

if u need ah contact number pm me

User avatar
mitsubishi_04lancer
Street 2NR
Posts: 45
Joined: March 12th, 2008, 10:48 am
Location: Caroni
Contact:

Re: cs3 lancer horn problem

Postby mitsubishi_04lancer » April 22nd, 2011, 10:39 am

Yes it got a air bag... i took down the steering part myself... i just bolted out the center part in the steering.. as soon as it bolts make contact with the steering... it start to make noise... wen i disconnect the ground wire connected behind the steering an it make contact... nothing happens..

i guessing its a grounding problem???

User avatar
rikosher
Street 2NR
Posts: 86
Joined: August 8th, 2009, 7:10 pm
Location: everywa

Re: cs3 lancer horn problem

Postby rikosher » April 22nd, 2011, 12:03 pm

use anoda ground frm sumwhere else, see if it wok,,,,

Advertisement

Return to “AUTOMOTIVE TECH”

Who is online

Users browsing this forum: No registered users and 3 guests