Flow
Flow
TriniTuner.com  |  Latest Event:  

Forums

RS vs GSR Transfer box

Mitsu Lancer, Evo, GSR, MIVEC, 4G**, GDI, Galant, Outlander, L200 Sportero/Triton etc.

Moderator: 3ne2nr Mods

User avatar
wishihadaEVO
Ricer
Posts: 19
Joined: October 19th, 2008, 6:29 pm

RS vs GSR Transfer box

Postby wishihadaEVO » April 29th, 2010, 12:29 pm

Could someone educate me on the technical difference between a transfer box on a GSR evo6 and that on a RS2/RS evo 6. Problem is that i have been told a host of varying and conficting things about it. Can a TB on a GSR work on a evo 6 RS2 are the internal components of the boxes different?........are the specifications of the bearings and crown wheel and pinion different?....pardon my lacking knowledge here, and i searched to see if this is posted anywhere and did not see anything but if this is a repost point me to where there is an answer on here please.
much thanks.

User avatar
Sanctifier
punchin NOS
Posts: 3768
Joined: June 9th, 2004, 8:09 am
Location: Good question!

Re: RS vs GSR Transfer box

Postby Sanctifier » April 29th, 2010, 4:30 pm

wishihadaEVO wrote:...the technical difference between a transfer box on a GSR evo6 and that on a RS2/RS evo 6.
Can a TB on a GSR work on a evo 6 RS2 are the internal components of the boxes different?...
are the specifications of the bearings and crown wheel and pinion different?...

Can a TB on a GSR work on a evo 6 RS2... Transfer cases (castings) are identical...and interchangeable.
I have both...and tried both for fit. Even the 4wd 1800 GSR Transfer Case can work. (Yup, from my old GSR.)

are the specifications of the bearings and crown wheel and pinion different?... I don't know. AFAIK they should be the same.

As far as differences in gear-ratios. Here are OEM specs for E6 GSRs, E6 RSs and E6 RS2s...
Make & Model: 1999 Lancer Evolution VI GSR.
OEM Specifications:
Image

Make & Model: 1999 Lancer Evolution VI RS and RS2.
OEM Specifications:
Image
BTW there was an OEM 4.875 final-drive ratio as well. It's perfect for Solodex if you can find one. No more 155 mph...but the ACCELERATION!... Image My E6 RS2 came with this one... Much less than 4.4 sec. to 60 mph... Tested constantly! :twisted: I swapped in a stock E6 GSR box and T/case to test...BIG mistake. It felt like I threw away a cylinder from the 4G63.
My $0.02¢

Thanks to Yeo, this will answer most of your other technical questions...
Link--> Evolution Drivetrain for Dummies.

His $0.02¢
Last edited by Sanctifier on May 23rd, 2010, 8:40 pm, edited 1 time in total.

User avatar
Kronik
18 pounds of Boost
Posts: 2453
Joined: July 23rd, 2004, 9:37 pm
Location: Central
Contact:

Postby Kronik » April 30th, 2010, 11:09 pm

i have an RS box, and i second what Sanctifier says about the acceleration......no top speed, but you reach it so quick!!

User avatar
LevinBZR
Street 2NR
Posts: 75
Joined: July 26th, 2008, 2:20 am

Postby LevinBZR » April 30th, 2010, 11:12 pm

^^^ Nice there uncle... real nice.

User avatar
wishihadaEVO
Ricer
Posts: 19
Joined: October 19th, 2008, 6:29 pm

Postby wishihadaEVO » May 1st, 2010, 8:01 pm

Kronik wrote:i have an RS box, and i second what Sanctifier says about the acceleration......no top speed, but you reach it so quick!!


Kronik what transfer case are you running?.......original GSR?....or did yuo put the whole RS set up box and Tcase in your GSR?

User avatar
Sanctifier
punchin NOS
Posts: 3768
Joined: June 9th, 2004, 8:09 am
Location: Good question!

Postby Sanctifier » May 1st, 2010, 9:32 pm

Kronik wrote:i have an RS box, and i second what Sanctifier says about the acceleration......no top speed, but you reach it so quick!!

Can you read the serial # off the g/box casing and post it please?
That will tell you the gear-ratios and final drive ratio that's installed...and if options are installed too.

User avatar
Kronik
18 pounds of Boost
Posts: 2453
Joined: July 23rd, 2004, 9:37 pm
Location: Central
Contact:

Postby Kronik » May 2nd, 2010, 10:42 am

wishihadaEVO wrote:
Kronik wrote:i have an RS box, and i second what Sanctifier says about the acceleration......no top speed, but you reach it so quick!!


Kronik what transfer case are you running?.......original GSR?....or did yuo put the whole RS set up box and Tcase in your GSR?


supposed to be full RS! i will check and make sure. i gonna change the seals on them, so i will check it


Sanctifier wrote:
Kronik wrote:i have an RS box, and i second what Sanctifier says about the acceleration......no top speed, but you reach it so quick!!

Can you read the serial # off the g/box casing and post it please?
That will tell you the gear-ratios and final drive ratio that's installed...and if options are installed too.


ok, will do that today or tomorrow

User avatar
Kronik
18 pounds of Boost
Posts: 2453
Joined: July 23rd, 2004, 9:37 pm
Location: Central
Contact:

Postby Kronik » May 3rd, 2010, 8:43 pm

tried to check the number on the box, it very hard to see! i will have to clean it good and go with a flashlight or something yes

User avatar
Sanctifier
punchin NOS
Posts: 3768
Joined: June 9th, 2004, 8:09 am
Location: Good question!

Postby Sanctifier » May 4th, 2010, 9:18 am

^ ^ ^ Post serial # when you get it. Thanks.

wishihadaEVO wrote:...Can a TB on a GSR work on a evo 6 RS2?...
BTW the only major difference between the two is...
The RS/RS2 T/case has a front helical LSD...which reduces understeer significantly.
The GSR T/case has an open diff...and understeers much more than the RS/RS2.

Advertisement

Return to “MITSUBISHI”

Who is online

Users browsing this forum: No registered users and 0 guests