Energy Sector Thread - Operators, Engineers, Technicians Et Al

[nervewrecker]

Actually retrofitted a few 410a systems with R290 as well.

Light commercial systems use same line sizes in some units, so I doubled the metering device capacity to half the pressures and drop the compressor RLA.

410a is 400 to 500psi discharge and 110 to 150psi suction, R290 is 240 to 300 psi discharge and 67 to 70psi suction so the compressor is almost at half FLA. Good luck to the poor sap's that have to work on that yes.

[sMASH]

And what are your long term solutions for the captured carbon?

Create fuel and return it back into the cycle?

Yes.


But, my experience is, the engineers know HOW to calculate, but not WHAT to calculate.

They think inside the parameters they have encountered.



I need to do it myself and see what I can see.



Need to know how GTL back end works...

[nervewrecker]

And what are your long term solutions for the captured carbon?

Create fuel and return it back into the cycle?

Yes.


But, my experience is, the engineers know HOW to calculate, but not WHAT to calculate.

They think inside the parameters they have encountered.



I need to do it myself and see what I can see.



Need to know how GTL back end works...

Come now, surely all engineers cant be painted with the same brush. There are engineers and then there is engineer, a gift to mankind from god, the best thing on the face of this earth, carved out of milky white pure marble to perfection and bought to life.

[sMASH]

Our engineers are glorified calculators.
Foreign engineers need to be able to innovate and ask questions and investigate.

Our get trained to fill in plant data for the end of month meeting.

[nervewrecker]

Not quite sure how to take that since me and the engineer does the same job just different departments and different places with two different titles.

I on the other hand put proposals forward and tend to be intuitive and forward with suggestions towards progression of the entire entity.

Now I see why I get the nickname "engineer"

[sMASH]

U are unique, met a few like u... The others... Meh....

A madnah went a German uni fur a project, while he was dojng his PhD in uwi.

He said theur programs and uwi programs are chalk and cheese. In a nutshell, he said there, was more like a research laboratory.
Here, they just gear up to get ah wuk in the oil an gyass.

[nervewrecker]

Im not an engineer, they just call me engineer.

In all fairness they limited to what they can do with this permit to work system. They do answer to someone and a lot of the younger engineers get blows from seniors who downright disregard their abilities or are resistant to change.

Same hurdles I face with men. Sometimes you report something and you get licks for it because someone saying you trying to make them look bad and them is pardners with the person you reporting it to. But you know me, persistent, I will find who wants to hear me and get things fixed. This same discussion came up just last week.

[sMASH]

I met some who were actually interested. But the vast majority just there to get enough money to blow out on the weekends.


Don't blame them tho, cause just as u said, they limited anyways.

[sMASH]

An easy way to kno if cgcl makes its co2 by methane combustion is by seeing if they inject air right after the reformer.

The Temps there supposed to cause the methane to auto ignite in the presence of oxygen.

That gas stream will be very hot, so it then would go to a high pressure steam boiler to recover that heat energy.

[nervewrecker]

I does call them paper pushers, because they like to stay in office and hide from sun.

It really is something to see one prompt on response to a problem, outside all the time, checking, double checking and being thorough, early for work till you can set you clock by this person and at the same time polite. Most are stock up and you cant talk to them, I was sold when I heard comments towards some guys installing a toilet. Was actually the same comments I made towards them so even better yet.

Some of the inexperienced ones feel attacked when you try to correct them. Corrected one recently and she got on a high horse like I attacking her.

[sMASH]

U lucky. A time i had to get a hesq signature on a permit, saw the new girl, went to ask and before I could say anyting, first ting she ever said to me was 'I have a husband'.

My head hot wirh trying to organize permits, I didn't kno how to calculate that into the work schedule.

And I dint think I used to look that thirsty.

[nervewrecker]

as we on the topic of carbon and fuel, I saw an ad concerning a plant of some sort in Point Fortin from I think was D2F or D. Rampersad. Mostly mech

Only plant I know down right now is the ethanol plant. But that's for export afaik.

[nervewrecker]

Smash, you make any headway?

I can't find anyone from cgcl right now.

But all I will say is god bless tuner and God bless you sir with your goat mouth. Now, suggest that I should be on a metal structure in the marine environment plz.

[sMASH]

Yes. Link wirh a former coworker In cgcl..
Confirmed they obtain their carbon from the methane feedstock.

So I will continue with my experiment to see how effective it is to scrub co2 from the air.




Now, Just need a gtl P&ID, to figure out the diesel generation part.

[wing]

Yara gets 10%. What will the PSA do now?

[sMASH]

Was not even aware that they were striking...
It seemed like a media censor.

[Richard Coer de Poulet]

Any good youtube videos for direct online starters? both Single phase and 3 phase? I am having trouble with controls

[Richard Coer de Poulet]

Im not an engineer, they just call me engineer.

In all fairness they limited to what they can do with this permit to work system. They do answer to someone and a lot of the younger engineers get blows from seniors who downright disregard their abilities or are resistant to change.

Same hurdles I face with men. Sometimes you report something and you get licks for it because someone saying you trying to make them look bad and them is pardners with the person you reporting it to. But you know me, persistent, I will find who wants to hear me and get things fixed. This same discussion came up just last week.

This is true is like the big bosses always reaching late and cant do nothing. my favorite is when dey like to quotes 'facts' and 'charts' etc and the data just wrong

[alfa]

Any good youtube videos for direct online starters? both Single phase and 3 phase? I am having trouble with controls

https://youtu.be/imr3zBi3pCw
https://youtu.be/q_04g8AB8lk
First vid is about the control circuit while the next one is about the practical connection of same. Hopefully this helps

[nervewrecker]

Im not an engineer, they just call me engineer.

In all fairness they limited to what they can do with this permit to work system. They do answer to someone and a lot of the younger engineers get blows from seniors who downright disregard their abilities or are resistant to change.

Same hurdles I face with men. Sometimes you report something and you get licks for it because someone saying you trying to make them look bad and them is pardners with the person you reporting it to. But you know me, persistent, I will find who wants to hear me and get things fixed. This same discussion came up just last week.

This is true is like the big bosses always reaching late and cant do nothing. my favorite is when dey like to quotes 'facts' and 'charts' etc and the data just wrong

Will have to agree to disagree on this. not all superiors are like this, some actually do know their stuff as was the case with one where they wear a kinda grey / green with the stripes down the shoulders. Man knows his stuff and don't mix matters, pity I never got to meet him.

Some higher up's have meetings to attend and / or emergencies to attend to so they can't always be there 8am. Its not like you can pick up the phone and reach them all the time either. Then there is work from home, a lot of companies opted to keep some aspects of this to minimize the amount of people present at any given time.

[nervewrecker]

Any good youtube videos for direct online starters? both Single phase and 3 phase? I am having trouble with controls

Take what you get online with a pinch of salt because its not always what you will meet out here. Has one guy that walks around with a picture of a DOL and when he meet a different type of contactor he spent half day and cant wire it.

[Richard Coer de Poulet]

Any good youtube videos for direct online starters? both Single phase and 3 phase? I am having trouble with controls

Take what you get online with a pinch of salt because its not always what you will meet out here. Has one guy that walks around with a picture of a DOL and when he meet a different type of contactor he spent half day and cant wire it.

yes is dat self cus nesc give me the notes but i having problems "seeing" or understanding what is going on but eventually when i get experience as you guys i will gt. cus as u say the youtube vids kind of...off or hard to understand

[Richard Coer de Poulet]

Any good youtube videos for direct online starters? both Single phase and 3 phase? I am having trouble with controls

https://youtu.be/imr3zBi3pCw
https://youtu.be/q_04g8AB8lk
First vid is about the control circuit while the next one is about the practical connection of same. Hopefully this helps

thanks alfa i watch the first the video it rel good, thanks hoss

[gastly369]

Im not an engineer, they just call me engineer.

In all fairness they limited to what they can do with this permit to work system. They do answer to someone and a lot of the younger engineers get blows from seniors who downright disregard their abilities or are resistant to change.

Same hurdles I face with men. Sometimes you report something and you get licks for it because someone saying you trying to make them look bad and them is pardners with the person you reporting it to. But you know me, persistent, I will find who wants to hear me and get things fixed. This same discussion came up just last week.

This is true is like the big bosses always reaching late and cant do nothing. my favorite is when dey like to quotes 'facts' and 'charts' etc and the data just wrong

I eh even have to ask what company you taking about....ik and 100% correct

[nervewrecker]

Im not an engineer, they just call me engineer.

In all fairness they limited to what they can do with this permit to work system. They do answer to someone and a lot of the younger engineers get blows from seniors who downright disregard their abilities or are resistant to change.

Same hurdles I face with men. Sometimes you report something and you get licks for it because someone saying you trying to make them look bad and them is pardners with the person you reporting it to. But you know me, persistent, I will find who wants to hear me and get things fixed. This same discussion came up just last week.

This is true is like the big bosses always reaching late and cant do nothing. my favorite is when dey like to quotes 'facts' and 'charts' etc and the data just wrong

I eh even have to ask what company you taking about....ik and 100% correct

Buh whey you talking bout? Big boss was always early, only person earlier than me was him.

[Cantmis]

https://trinidadexpress.com/business/lo ... b.amp.html

[mad]

https://trinidadexpress.com/business/local/oil-production-lowest-in-a-generation/article_ee7d40aa-d67e-11ed-b4e3-33cd4f803dfb.amp.html

Not just Oil, Its gas too, NGC struggling to supply its users and they trying to keep this away from media attention. Most plants gas contracts are up for renewal this year and next year. Will be a shitshow when this get media attention and plants have to Shutdown. They already sharing VSEP in LNG and planning to shutdown a next train.

[sMASH]

https://trinidadexpress.com/business/local/oil-production-lowest-in-a-generation/article_ee7d40aa-d67e-11ed-b4e3-33cd4f803dfb.amp.html

Not just Oil, Its gas too, NGC struggling to supply its users and they trying to keep this away from media attention. Most plants gas contracts are up for renewal this year and next year. Will be a shitshow when this get media attention and plants have to Shutdown. They already sharing VSEP in LNG and planning to shutdown a next train.

A next train? Wow.

Makes sense of they not getting tru with dragon gas

[nervewrecker]

But ent lng recently had shutdown or still have shutdown going on? Cuz I see a set of massy men fixing something in there this week and massy men all over. Scaffolding set up all over like them straw thing the little men like to build in fraggle rock.

[mad]

https://trinidadexpress.com/business/local/oil-production-lowest-in-a-generation/article_ee7d40aa-d67e-11ed-b4e3-33cd4f803dfb.amp.html

Not just Oil, Its gas too, NGC struggling to supply its users and they trying to keep this away from media attention. Most plants gas contracts are up for renewal this year and next year. Will be a shitshow when this get media attention and plants have to Shutdown. They already sharing VSEP in LNG and planning to shutdown a next train.

A next train? Wow.

Makes sense of they not getting tru with dragon gas

Dragon Gas will never materialize unless sanctions are lifted entirely and not for just 2 years. There is no way infrastructure will be laid out before 2 years for us to even get a taste of that gas. And that's including running pipeline subsea.