Flow
Flow
TriniTuner.com  |  Latest Event:  

Forums

SR FWD ---> RWD conversion

Sunny to Skyline - SR20, CA18, RB20-26, VG30 etc.

Moderator: 3ne2nr Mods

User avatar
belalegosi
18 pounds of Boost
Posts: 2401
Joined: August 19th, 2003, 8:53 pm
Location: MN
Contact:

SR FWD ---> RWD conversion

Postby belalegosi » June 29th, 2006, 8:37 pm

i think someone posted about this already...
anyways here's a group buy going on in another forum for it.

[quote]This group buy requires 5 to initiate, I have 4 commitments as of 3/16/06. If I receive more than 5 by 3/21/06, I will extend the initial $245 offer to all that make commitments by that date.

Here are the details:


Group Buy: Nissan SR Engine to Nissan L Series Transmission Adapter.

This adapter will mate any FWD SR series Nissan engine to any transmission used with a Nissan L series engine.

Transmissions used with any Nissan L13, L14, L16, L18, L20B, L24, L26 or L28 engine can be mated with this adapter to any SR16VE, SR20DE, SR20VE, SR20DET and SR20VET engine used in a FWD or AWD vehicle. It replaces the original steel sandwich plate that goes between the engine and transmission. Note: The RWD SR20 engines will not work with this adapter.

The adapter is made from 3/8â€

User avatar
TriniGT
punchin NOS
Posts: 4293
Joined: May 6th, 2003, 12:22 pm
Location: Home Playing DIYer

Postby TriniGT » June 30th, 2006, 8:50 am

I have a friend with a P10 primera in New Zealand that made his AWD P10 a RWD and it works nice, I think he has a GTiR setup and he disconnected the front wheel setup and it hauls arse.

User avatar
Bezman
Trying to catch PATCH AND VEGA
Posts: 6635
Joined: April 24th, 2003, 2:47 pm

Postby Bezman » June 30th, 2006, 11:28 am

most important part left out there:

A complete FWD SR20/16VE into an existing RWD car like a 240SX or a 510 is not going to be an easy conversion. I designed this adapter to allow the use of a common transmission to an SR16VE specifically for SCCA GTL road racing.

Yes, a complete swap into a street car will involve using an alternate ignition system, fabrication of water lines to the pulley end of the engine, relocation of the cam solenoids and creation of custom motor mounts, but this work is the easier (although time consuming) part of the fabrication. For a typical hobbyist, the adapter will help make this swap possible, but it is not for everyone.

User avatar
dbesson
Sweet on this forum
Posts: 279
Joined: September 20th, 2005, 5:50 pm
Contact:

Postby dbesson » July 4th, 2006, 8:54 pm

A lil clip of a rear wheel drive P11 in action
http://www.krazeguy.com/images/krazeguy_rwd_primera.mp

budzz89
Riding on 13's
Posts: 1
Joined: April 18th, 2009, 3:03 am

Re: SR FWD ---> RWD conversion

Postby budzz89 » April 18th, 2009, 3:09 am

[quote]This group buy requires 5 to initiate, I have 4 commitments as of 3/16/06. If I receive more than 5 by 3/21/06, I will extend the initial $245 offer to all that make commitments by that date.

Here are the details:


Group Buy: Nissan SR Engine to Nissan L Series Transmission Adapter.

This adapter will mate any FWD SR series Nissan engine to any transmission used with a Nissan L series engine.

Transmissions used with any Nissan L13, L14, L16, L18, L20B, L24, L26 or L28 engine can be mated with this adapter to any SR16VE, SR20DE, SR20VE, SR20DET and SR20VET engine used in a FWD or AWD vehicle. It replaces the original steel sandwich plate that goes between the engine and transmission. Note: The RWD SR20 engines will not work with this adapter.

The adapter is made from 3/8â€

User avatar
carholics
3NE 2NR for life
Posts: 102
Joined: March 17th, 2014, 5:46 pm

Re: SR FWD ---> RWD conversion

Postby carholics » May 1st, 2019, 5:40 pm

is dere anyone dat makes dis plate for sr20 to l series tranny indeed of one call 3429218

Advertisement

Return to “NISSAN”

Who is online

Users browsing this forum: No registered users and 1 guest