MAZDA People United

[katurbobeast]

that setup came off a Hiyabusa bike.....but im looking for somewhere that sells things like that.......motorbike engine parts and carbie jets, etc.etc.

im thinking bout either going 4-throttle on my BP, depending how easy these jets are to get......

if i cant, then im forced to go Microtech LT8.....

the price for peformance is what im looking at.....

[Computerman]

How difficult is it to get 5fwd gearbox setup on my car?? How much will it cost (approx.)?? I'm trying to weigh the cost of repairing the tranny or replacing the tranny as opposed to going manual.

[katurbobeast]

anyone one knows if the 22V-14 BG calipers would work on the BF knuckle?

[wagonrunner]

computerman, i would budget $3500, this would include all parts & labour. you may get it in for less, depending on the price you would pay for the gearbox, as well as perhaps you wont need as much parts as my conversion would.

[katurbobeast]

just an update on my project...

things i've done to prep for the install over X-Mas
F-series G-Box
<a href="http://img235.imageshack.us/my.php?image=pa0202942wv.jpg" target="_blank"><img src="http://img235.imageshack.us/img235/9775/pa0202942wv.th.jpg" border="0" /></a>
Crossmember Fabrication to make big things fit properly...
<a href="http://img235.imageshack.us/my.php?image=pa1603922ea.jpg" target="_blank"><img src="http://img235.imageshack.us/img235/1169/pa1603922ea.th.jpg" border="0" /></a>
<a href="http://img235.imageshack.us/my.php?image=pa1603935ah.jpg" target="_blank"><img src="http://img235.imageshack.us/img235/6906/pa1603935ah.th.jpg" border="0" /></a>
<a href="http://img235.imageshack.us/my.php?image=pa1603942ob.jpg" target="_blank"><img src="http://img235.imageshack.us/img235/3575/pa1603942ob.th.jpg" border="0" /></a>
my good old KA.......
<a href="http://img367.imageshack.us/my.php?image=pa1603951xp.jpg" target="_blank"><img src="http://img367.imageshack.us/img367/3803/pa1603951xp.th.jpg" border="0" /></a>

and another goodie picture for yall to drewl off of....
<a href="http://img370.imageshack.us/my.php?image=bpt12qg.jpg" target="_blank"><img src="http://img370.imageshack.us/img370/7004/bpt12qg.th.jpg" border="0" /></a>

[fiveforward]

computerman> a gearbox is likely to run u about $1500-$2000 a good working tranny which is like hardass to fine especially in good condition will run about $3500 up, but daiz based on MY PERSONAL EXPERIENCE. I would rarther a box cause damaged parts can be replaced easily i.e clutch & pressure plate as opposed to a good tranny job which will run u in the couple hundreds.

BTW driving in traffic with a clutch is not so bad, I though it would be horibble and my leg would seize up but, I seldom have to change as i pull of in 2nd and build. Manual in traffic is just like auto especially when u have a friendly clutch (NO COOPER). Just takes some getting used to

[katurbobeast]

ummm...a 5fwd box for the E5 costs u about 400$.....axles about $250 a side.. flywheel, clutch & PP no more than 600 an we'll include the clutch cable with that...
shifter links should run u about 100....

so thats...$1600......and u could do it yourself with a hydraulic jack, 4 TCL bricks, 10,12,14,17,19mm sockets with a 3/8 extension!!! oh and a friend!!!! unless u wanna play hulk...it is possible to do it by yourself though.... kinda

[katurbobeast]

anyone knows if the BG/BJ type front disc knuckle bolts to the BF323 chasis?
and would the F-type hub fit into the G-type knuckle?

where is acoustic?..?? i need some x-perience help here...

[AcousticEng]

amm that pic is a KB laser not a KA. The only way to find out if it works is to try it yourself and figure it out.

[fiveforward]

Turbodrive: Inspiration




1800 4wd turbo, very rare model its a lightweight model with forged internals.
custom extractors, garret ballbearing turbo, external wastegate, link computer, 3" exhaust from turbo, front mount intercooler, duel stage
boost controller, bov group A gearbox, professionally lowered, 17" mags

-----------------------------------------------------------------------------------------------------
Computerman:



1993 323 s/w, 1600 dohc turbo running gear,engine done about 10,000km since rebuild, new pistons rings bearings etc..custom exhaust manifold,

s5 rx7 turbo,38mm external, fuel press reg vr4 inj, bov, new 600 by 300 intercooler & custom plumbing.k&n,17" wheels w new 205/40's lowered

on super low kings, all 4 wheel disc brakes off dohc turbo

--------------------------------------------------------------------------------------------------

Rotarymen:


had nuttin 2 do

[maximus]

ah see u real busy des days 5fwd. whappen d car 2 fast

[katurbobeast]

ummm KA/KB same ole ting...

[AcousticEng]

ummm KA/KB same ole ting...

A KA laser has recessed front lights, a whole different front panel and different back lights. Is BF and BG the same, no.

[katurbobeast]

okie dokie man....

[fiveforward]

nah papa waiting on ah pressah regulator

[TurboDrive]

Wha allyuh saying 'bout BG dey? lol. Anyways fellas ah finally gettin back de car tomorrow. It aint looking too bad. Ah have to get used to ah smooth shiney look now. Ah will want to post up a pic but ah dont have a digital camera. Anyone want to help?

[Computerman]

Ah will want to post up a pic but ah dont have a digital camera. Anyone want to help?

When yuh ready check meh.

[TurboDrive]

Computerman ah get it back. Looks good. I'll check yuh Give me directions.

[Computerman]

Computerman ah get it back. Looks good. I'll check yuh Give me directions.

Call me @: 767-9771 ; 673-3612 ; 673-0048

[wagonrunner]

5fwd, check your pm nah. i want a price on dash inserts for my car. and fellas i have a treat for allyuh. while i was waiting to board the lynx i saw a mazda which was very strange to me. i should be getting the camera back on monday so i will post the pics then.

[blue_toothbrush]

wen is d next mazda meet. Wudnt hurt meetins sum new mazda folks.

[mazdamig]

five forward you can get a fuel regulator by sheriff bosch.

[wagonrunner]

fellas, your classic is in this thread http://forums.trinituner.com/forums/vie ... 287#988287

[TurboDrive]

Never saw one o' those before Looks good though.
Is it just me or is the third pic not loading correctly.

[press naes]

wen is d next mazda meet. Wudnt hurt meetins sum new mazda folks.

Yesterday, Wallers...the best! Everybody boosted, real fun & great lime. We had everybody doing donuts ( even Acoustic ) & Five run the ride red...he spitting fire. All dem car wuking ras, & meh bwoy Ray, FWD 323, BPT power in dey MC. We even heat up the Cross last night.

Respect to FiveForward, AcousticEng, AvoidusRacingCrew, 2:57, RAY, Epidemic, Auntie Val & the Maturita Rec. Club posse & everybody who made the lime From Wallers to the Cross.

[fiveforward]

Allyuh Bastards......Allyuh run on de cross aahhhhhh FACK

Good Last minute lime guys. love it + fellaz from team renesis we have VIDEOZ
of the cars wilin' out in wallers. Gonna put it on VCD so ah go leh allyuh know when
ting dun.

Aight ah letting u guys know THIS WEEKEND IF IT HAVE WALLERS WE R GOING
more info will be posted but next drags is a lime. (providing everybody car wukkin').

[katurbobeast]

i aint see no mazdas at wallers nuh.......where allyuh was? in d background?

[press naes]

Yeah Five, we were waiting by Claxton Bay exit for allyuh. Ah see Acoustic fly pass & ah was looking out fuh yuh, but ah didn't see yuh pass, (somethings just don't change though, ). Anyway, we end up in the Quick Shop for some more rum & we couldn't let the BPs go to waste, so mazdafire on the Cross.

[TurboDrive]

Allyuh men is some sonoaguns. Allyuh men doh say wen allyuh going tuh lime. Like is only boosted men allyuh entertaining. Hmmm... Like we have a clique within de club...

[Val]

fellas how fast is an mx-6?