The Official CS Lancer Thread!

[xtech]

thats a 6A13 TWIN TURBO from Galant VR4

[turbo_beast369]

@ blazing slim line fans

[suzieboy]

Correct. Fortunately there is room for the radiator inside...barely...lol....the slim fans wud hav to go on the outside An blow in.

[QG]

Looking good there!!

[genghis]

1 lil V6 pass and allyuh pass mih over with mih coilpack problems...........

btw props blazing! you and mamoo handling bizness!

[venum]

Hey guys, any one with FU singapore CS3 replaced there Coilpacks?

one of mine is gone i rigged up a replacement buts it not 100%

any of the parts men i check not willing to part with a working coilpack off a engine.
faiz have cheap one for $250 but it not lining up up properly.
and i NOT willing to pay $2700 by diamond motors.

check Simpson Motors in Bdos

we have a pardna that living there that making a trip home soon

[genghis]

$460 BD = $1,500 TT from simpson.

i still feel that kina ridiculous.

[fras]

^coil packs 4 sale
http://www.trinituner.com/v3/forums/viewtopic.php?f=6&t=370510&hilit=coil+pack

[ZeroOne]

Fellas the cradle arm bushings are 6 in total? 3 per arm?

How many bushings are there at the back?

[fras]

^6
Its not 4 bushings and 2 ball joints?

The back should be... 2 for both trailing arms, 4 for both cradle arms... cant remember what other arms the cs carry behind there

[mety57]

engine mount needed why do they go so quick

[xtech]

^^^wrong rubber used thats why

[turbo_beast369]

genghis $1,500 for one?

[fras]

engine mount needed why do they go so quick

Taiwanese? Window weld polyurethane FTW

[ZeroOne]

^6
Its not 4 bushings and 2 ball joints?

The back should be... 2 for both trailing arms, 4 for both cradle arms... cant remember what other arms the cs carry behind there

I dunno I seeing some on ebay.

Front: http://cgi.ebay.com/ebaymotors/Energy-S ... 519wt_1165

http://cgi.ebay.com/ebaymotors/Whitelin ... 254wt_1165

back: http://cgi.ebay.com/ebaymotors/Energy-S ... 3043wt_939

Doing some research to see if these would work

[mety57]

fras whats that

[mety57]

xtech whats the price on them mounts

[genghis]

yes!


and more in diamond motors

[turbo_beast369]

whey sahh..and untop ah dat $1,500 u hadda pay duty then VAT...check federal or faiz, they might have them for around $1,100-$1,200 or so (OEM)

d shiddy ting bout it is that the new ones u get in the firm have the brand "Diamond" on it and it looks cheaper while the original ones mark "Denso" on it...

or check quickpc's or w2j and see what the cost from them would be...I have 2 of my original used coilpacks at home that were changed due to mis-diagnosis, if u want them borrow while u lookin check meh

[EVA Unit-01]

^6
Its not 4 bushings and 2 ball joints?

The back should be... 2 for both trailing arms, 4 for both cradle arms... cant remember what other arms the cs carry behind there

I dunno I seeing some on ebay.

Front: http://cgi.ebay.com/ebaymotors/Energy-S ... 519wt_1165

http://cgi.ebay.com/ebaymotors/Whitelin ... 254wt_1165

back: http://cgi.ebay.com/ebaymotors/Energy-S ... 3043wt_939

Doing some research to see if these would work

rem what i said, from my last research Energy makes nothing for the eastern market Lancers, just USDM. not sure about the Whiteline, but they might be the same... it's up to you whether you wanna risk it...


mety, which mount you're looking for? fras is talking about about DIY poly mounts, which you'd rather not put on your daily driver (take it from the hardened guy with the front inserts ). if you're not up for OEM pricing, check ronsin1 for some replacements he uses...

[turbo_beast369]

^^^aye look OEM Rotor guy.....

[mety57]

eva i looking for the tranny and the front

[daniel135]

all this niceness after i done sell the CS... :s

^^^^why?so what you have now?

[ZeroOne]

^6
Its not 4 bushings and 2 ball joints?

The back should be... 2 for both trailing arms, 4 for both cradle arms... cant remember what other arms the cs carry behind there

I checked ASA its 1 bushing per arm and 1 ball joint per arm

[turbo_beast369]

there are 2 bushing per cradle arm (if u talkin bout the front)
as well all know the big one can replace, the small one can't, u could probly make it over but you can't get it aftermarket

[ZeroOne]

yea its the big one in front Im talking about. ASA doesn't show the other small bushing.

[fras]

Every bushing is replaceable fellas... If u cant get it poly u'll get it oe!

[ZeroOne]

So the small bushing is replaceable then?

Ill post up a pic later from ASA.

[fras]

[turbo_beast369]

no u cant get the small bushing OEM...most likely in poly