MAZDA People United

Computerman · Postby **Computerman** » July 15th, 2005, 7:33 pm

All I want is de KL-V6 with a nice smooth Automatic Transmission! :mrgreen:

I need to change de air intake....any suggestions ppl?

katurbobeast · Postby **katurbobeast** » July 15th, 2005, 8:30 pm

ok cool thanks for those pics man..!!

im going to be rebuilding the engine over a 2mth period, because i am gonna clean and paint the engine as well, then reassemble it and store it away until im ready to do the swap, which would be over christmas holidays!!

i disassembled the camshafts from the cyl-head and sprayed them with bel-ray 6in1, then wrapped them in a old t-shirt. i sprayed the solid lifters, cam-assembly and bolts with the 6in1 and stored them in plastic bags.
i left the valves in the cyl-head......
i disassembled the intake manifold as well to prep for painting....
i left the BLOCK assembled....

so from now until october i would be taking my time to clean and paint the engine and rebuild it with new gaskets and piston rings!!
do i have to change the piston rings?

if y'all wanna see pics....just let me know, i'll post em!!

PS: acoustic....poyeas have about 4 BPs left there....only maybe 2 are in good condition!! I believe B.M. brought in some BP's as well.....but they will cal real $$$ for it......BASTARDS

mazdamig · Postby **mazdamig** » July 15th, 2005, 11:16 pm

Where is poyeas

mazdamig · Postby **mazdamig** » July 15th, 2005, 11:28 pm

BPT in 323F

B6T in a other 323F

fiveforward · Postby **fiveforward** » July 16th, 2005, 12:19 am

guys i am looking for 2nd gen FRONT suspension setup i.e
just shocks & springs really. Anyone knows where i can get
these to buy

btw mig. those r some beast pics dey boy

good luck with the install

katurbobeast · Postby **katurbobeast** » July 16th, 2005, 8:31 am

poyeas is in d back of d bamboo...

drive straight down the road, until u see a place on the right looking like an old concrete parking lot, turn right into that street...and its the first building on the left, with the big blue gates....next to boyzin!!

i think its one of the streets on the right just after the turn off for ramas and parabhus!!

katurbobeast · Postby **katurbobeast** » July 16th, 2005, 9:16 am

GTR Group A Rally Spec:
Mazda BPD 1800cc 210hp

GTR BPD 210HP, If you find this in the bamboo in your life, you've found something very priceless!!!

BP in a Laser, plenty of room for some goodies....

Bad Azz GTX

Just thought I'd post some pics..

X2Board · Postby **X2Board** » July 17th, 2005, 7:56 am

fellas can the manual tranny from the B3 (1.3SOHC )Engine work on the 1.6 DOHC??

mazdamig · Postby **mazdamig** » July 17th, 2005, 9:36 pm

If the gearbox is F25M-R. Get the gearbox from a Z5 engine.

press naes · Postby **press naes** » July 18th, 2005, 10:06 am

Yo, Team Renesis we on like that meing. It mighty ras...time for some mods.
Thanx to Avoidus & Acoustic Eng.

2fiddysevn forever

NEED4SPEED · Postby **NEED4SPEED** » July 18th, 2005, 12:50 pm

all kinda pics allyuh putin up but none from d last lime alyuh MOFO"s

AcousticEng · Postby **AcousticEng** » July 19th, 2005, 9:49 am

press naes wrote:Yo, Team Renesis we on like that meing. It mighty ras...time for some mods.
Thanx to Avoidus & Acoustic Eng.

2fiddysevn forever

now we talking, lets make that lime, press when is d next yanci drags?

press naes · Postby **press naes** » July 19th, 2005, 2:31 pm

Yeah mon AE, I'll check it out & holla@ya. Ah still have ah few bugs to sort out though...small ting...& we sneezing too, lol

. Wham to Five & the project. Five ah call'n yuh out anytime yuh ready, aah-ite,

.
Ah go talk to allyuh later.

2fiddysevn forever

katurbobeast · Postby **katurbobeast** » July 20th, 2005, 6:00 pm

the new BP for my KA....

<a href="http://img130.imageshack.us/my.php?image=picture0395zr.jpg" target="_blank"><img src="http://img130.imageshack.us/img130/3392/picture0395zr.th.jpg" border="0" /></a>

<a href="http://img130.imageshack.us/my.php?image=picture0415yc.jpg" target="_blank"><img src="http://img130.imageshack.us/img130/5287/picture0415yc.th.jpg" border="0" /></a>

<a href="http://img305.imageshack.us/my.php?image=picture0482ih.jpg" target="_blank"><img src="http://img305.imageshack.us/img305/8371/picture0482ih.th.jpg" border="0" /></a>

i dont know who that is?
<a href="http://img305.imageshack.us/my.php?image=picture0507zs.jpg" target="_blank"><img src="http://img305.imageshack.us/img305/7596/picture0507zs.th.jpg" border="0" /></a>

<a href="http://img305.imageshack.us/my.php?image=picture0524vt.jpg" target="_blank"><img src="http://img305.imageshack.us/img305/7830/picture0524vt.th.jpg" border="0" /></a>

<a href="http://img305.imageshack.us/my.php?image=picture0543mj.jpg" target="_blank"><img src="http://img305.imageshack.us/img305/3214/picture0543mj.th.jpg" border="0" /></a>

<a href="http://img305.imageshack.us/my.php?image=picture0579ba.jpg" target="_blank"><img src="http://img305.imageshack.us/img305/4466/picture0579ba.th.jpg" border="0" /></a>

<a href="http://img305.imageshack.us/my.php?image=picture0628cw.jpg" target="_blank"><img src="http://img305.imageshack.us/img305/3197/picture0628cw.th.jpg" border="0" /></a>

<a href="http://img305.imageshack.us/my.php?image=picture0594rk.jpg" target="_blank"><img src="http://img305.imageshack.us/img305/3/picture0594rk.th.jpg" border="0" /></a>

<a href="http://img305.imageshack.us/my.php?image=picture0675sg.jpg" target="_blank"><img src="http://img305.imageshack.us/img305/4480/picture0675sg.th.jpg" border="0" /></a>

whos own is this?
<a href="http://img306.imageshack.us/my.php?image=ttdra104uv.jpg" target="_blank"><img src="http://img306.imageshack.us/img306/889/ttdra104uv.th.jpg" border="0" /></a>
<a href="http://img306.imageshack.us/my.php?image=ttdra335lx.jpg" target="_blank"><img src="http://img306.imageshack.us/img306/2788/ttdra335lx.th.jpg" border="0" /></a>

mazdamig · Postby **mazdamig** » July 20th, 2005, 10:40 pm

323F sport I saw a front cut of your car in the Bamboo by poyeas.It have the V6 engine you better go get that. katurbobeast they have no ECU and harness for the BP what the F@#k is that.

Aaron 2NR · Postby **Aaron 2NR** » July 21st, 2005, 6:32 am

^ yeah but dey not sellin the engine alone..

323fsport · Postby **323fsport** » July 21st, 2005, 10:55 am

yeah.. they ain't selling the engine alone... the last price they gave me was 14k.

Computerman · Postby **Computerman** » July 21st, 2005, 12:09 pm

mazdamig wrote:323F sport I saw a front cut of your car in the Bamboo by poyeas.It have the V6 engine you better go get that.

MC! MC! MC!

Why they have to have that when I ent got the $$?! Dat's the KL yuh talkin 'bout right?

katurbobeast · Postby **katurbobeast** » July 21st, 2005, 3:14 pm

well ok....i thought i mentioned it had no ecu or harness dude!!

i only bought it because im using aftermarket management...so y would i want the stock ecu anywayss...!!!

how much did he say for the BPs'?

and what the firetruck is up with 14k for the v6....that man drinks too much alco!!! unless it a complete engine package and its the 2.5KL-ZE
he's a mad man!!!

fiveforward · Postby **fiveforward** » July 21st, 2005, 6:32 pm

aight beyotches here's the progress:

both engines out and on the ground, will take pices tomorrow
the intercooler has been installed, suspension kinda out, shifter
pedals mounted already.

ran into some problems but i am coping
have to change rims (i really doh have dat kinda cash)
pressah tuh find drop spring dong here so gonna have tuh chop for the hour (i really, until i can bring them in (didn't wanna do this 2)
most everything lines up (more or less).

a front cut is VERY heavy bwoy, no joke. I ketch MEH ASS tuh move
it from belmont using a cherry picker, a van, some rope, 2 jacks and
some other ratch stuff to south. but it's a learing process

BTW 323 if yuh looking for a KL-ZE engine there is 1 by the guy who i bought mines from and there is one in a blue 626 for sale currently. Or you can go 2.2 instead.

Cyar wait tuh ;earn the car proper jed. Ah BROKES but EXCITED :mrgreen:

pres doh frighten ah coming fuh yuh jess now

kat nice project man

AcousticEng · Postby **AcousticEng** » July 21st, 2005, 10:29 pm

we own d white laser, it was getting traction and ignition problems that day :cry:

. doh worry i fix it :lol:

d ignition wires burn out. it ran 15.8 that day, should be back to early 15.s late 14s next time.

maximus · Postby **maximus** » July 22nd, 2005, 10:42 am

5fwd if the rims could fit on my car i'll take em, what kinda $ u lookin for

katurbobeast · Postby **katurbobeast** » July 22nd, 2005, 11:51 am

anyone knows where sells ECUs' ? preferably in the north or east?

where can i find the WOLF 3D v4 ecu?
or haltech e6k or microtech lt8

Computerman · Postby **Computerman** » July 22nd, 2005, 7:26 pm

I fixin back meh car for now yes....will look into the 2.0 business next two years or so.

fiveforward · Postby **fiveforward** » July 22nd, 2005, 8:44 pm

engine INSTALLED
suspension INSTALLED
gear box INSTALLED

just found out the the bigger front rotoes CANNOT work
due to turbo axle and 2.2 alxe line up being different
so.........hadda look for a 2.2 brake upgradei.e out of
our local mx6 and dem if not fcuk dat
later in the year aftermarket

supposed to go by electrician tommorow
Fadd lord i have REAL PARTS for sale jed damn

max man what kinda car you have bro.

mazdamig · Postby **mazdamig** » July 22nd, 2005, 9:53 pm

323F sport 14K damn but you will need the engine mounts from the front cut and other parts.

How the muffler bearings in the bamboo bring a BP engine with no harness and ECU.They tell me $2500.00 for the engine. You get the air sensor for the BP engine.