Flow
Flow
TriniTuner.com  |  Latest Event:  

Forums

PRE AMP PROBLEM.....HELP PLZZZ

(I.C.E.)In Car Entertainment - Mobile Audio and Video

Moderator: 3ne2nr Mods

vickstar
Riding on 13's
Posts: 2
Joined: October 23rd, 2012, 7:01 pm

PRE AMP PROBLEM.....HELP PLZZZ

Postby vickstar » February 1st, 2013, 10:46 pm

I HAVE A POWER ACOUSTIK PMW-20 PRE AMP AND I AM RUNNING 2 AMPS ONE 4 CH AN ONE 2 CHANNEL FOR MIDS AN BASS RESPECTIVELY..PROBLEM IS....WHEN I CONNECT FROM BEHIND MY DECK INTO THE FRONT OUTPUT AND JACK IN THE RCA'S TO THE PREAMP THE MIDS IS PLAYING ALL THE BASS AND THE SUB ISNT GETTING ANY FEED AT ALL....HELP PLZZZ

User avatar
nervewrecker
3NE 2NR Power Seller
Posts: 23829
Joined: July 31st, 2007, 2:27 pm
Location: The world is fl4t

Re: PRE AMP PROBLEM.....HELP PLZZZ

Postby nervewrecker » February 1st, 2013, 10:56 pm

What deck? Does it have a hpf? Is it switched on?

The 2ch, the on board xover is set to hpf or lpf?

Chances are if your deck has a hpf it has a lpf too and maybe an eq so you wasting time with a preamp.

User avatar
exia_sir
Sweet on this forum
Posts: 250
Joined: January 29th, 2008, 12:34 am
Location: maraval

Re: PRE AMP PROBLEM.....HELP PLZZZ

Postby exia_sir » February 6th, 2013, 1:24 am

there are two knobs... the big one tunes the bandwidth of the frequency and the other to boost or cut. you probably just have the big knob turned all the way up making the bandwidth large enough to pick up the other frequency ranges with it. Make sure the sub RCA is coming from the "sub out" port into the 2 channels for the subs. Also check the amp to make sure that a HPF isn't on the amp or any strange crossover or EQ settings are on the amp.

Advertisement

Return to “I.C.E. / Car Audio Tech”

Who is online

Users browsing this forum: No registered users and 10 guests