Moderator: 3ne2nr Mods
Read Diagnostic Code:
1. Connect TE1, and E1, terminals of check connector.
2. Turn ignition switch to ON. Do not start the engine.
3. Read the diagnostic code as indicated by the number of times the Check Engine Light flashes.
Diagnostic Code Indication:
â€¢ If the system is operating normally, the light will flash two times per second.
â€¢ In the event of a malfunction, the light will flash 1 time per second. The number of blinks will equal the first number and, after 1.5 seconds pause, the second number of the two digit diagnostic code. If there are two or more codes, there will be a 2.5 seconds pause between each.
NOTE: In the event of several trouble codes occurring simultaneously, indication will begin from the smaller value and continue to the larger.
dutch2004 wrote:Can anyone tell me where i can get an O2 sensor for a nze corolla?
i called toyota and they want to charge almost 2000 for a sensor. I spoke to mechanic who says that i can use a universal O2 sensor instead. Any recommendations would be appreciated
Thanks in advance.
Hook wrote:The Altis OBD isn't as simple as the 20V. He'll have to have the problem diagnosed with a code scanner to determine what's wrong before he decides whose fault it is. Any reputable mechanic should have the necessary equipment and know-how to diagnose the problem.
Users browsing this forum: No registered users and 8 guests