On March 15th 2013 , Mazworx and Hummy (Car Owner from Trinidad) went to do some Testing on the new SR20VET Pro Drag S15. They were basically doing some Burnouts and 60 Foot times.. Stay tuned for more updates !!! Facebook Video Video link included
Mazworx Project Nissan SR20 S15 owned byTrinidads very own ''Hummy'' will more than likely be Testing the Car @ the Orlando Speedworld Dragway 05/14/13. Coverage of this will be done by Sinister Audio Christian who is heading up. Get ready for some Trini SR20 Action soon !!! meanwhile the cars doing other jobs
The guys were doing some testing the past few days with great results!!!
Taken from their facebook page ''Just got done testing our Mazworx built S15 at Orlando Speed World Dragway...will be updating soon with some pics and video footage from the runs. '' https://www.facebook.com/teknotoyz/post ... 5312567318
I have a question, so doh kill mih but, That thing looking like a fuel cell, why is it positioned in front of the already smallish radiator? Will that not pose any problems?
^ That is indeed a fuel cell in front of the radiator.. More than likely this car is running a filled block (if stock block is used) or maybe a solid billet block (no water passages). Water is only used to calculate through the head, so not much is needed. Also they're using methanol which is a very cold fuel, so you don't need much water to keep the engine cool.
Yes Garrett Inside and to add to Rotary Boys comment. These type of cars does not need no Big Capacity Fuel Cell because its not a street car and lighter is better. after each run just top it up. Also less fuel line is needed and less risks of fuel lines passing next to you inside the car incase a leak was to happen. In the event of an accident if the car turns upside down its usually the engine side closer to the ground so if your fuel cell was at the back and there was to be a leak it would be more than likely passing by your head ,close to the driver. Up at the front where it is this cant happen. The only thing is hitting a wall/car direct to the front , upon impact it could burst Most put the Ice Box and/or Nitrous bottles inside the car.
More than likely pac fuel cell exploded here maybe
Mazworx and Trinidads Hummy has been doing some work lately on the Project Drag Silvia S15 , here is a snapshot of their Billet Block SR20VE that will installed in the Car in the near Future.
Foreign Drag Update: Despite he is in Foreign , Our very own Mohammed Ali aka ''Hummy'' with his Full Chassis Drag Nissan Silvia S15 SR20VET project being built by Mazworx managed to achieve a NEW PERSONAL BEST of 7.94 @ 164 MPH at the Dragmania Event in Orlando with 1.000 Reaction Time, an amazing 1.08 60ft , 3.17 330ft , 4.99 @ 134 MPH in the 1/8 Mile and 6.58 in the 1000ft Mark and a ET 7.94 @ 164 MPH in the 1/4 Mile / 1320 ft. Now to make it more exciting this was against the Great ''KAKO RACING SR20 DATSUN'' , Very memorable pass it probably has been for Hummy to do his first 7 Second pass against Kako !!! Kako of course had problems on this pass and has had a few problems the last time he ran also. So Congratulations to the crew and time down go down deeper in the 7's Hummy !!!
MORE VIDEO FOOTAGE of Trinidad's Mohammed Ali Nissan Silvia S15 SR20VET 7.94 @ 164 MPH VS The Worlds Fastest Datsun SR20 Powered KAKO RACING !!! at the Dragmania Event in the Orlando Speedway, USA
Last edited by FugiTECH on August 18th, 2013, 4:17 pm, edited 1 time in total.
At testing yesterday representing Trinidad and Tobago, Mohammed Ali otherwise known as hummy was at the Orlando Dragway with his Mazworx built S15 sr20vet drag car testing !! On his 1st pass he got problems , pending more results soon tody if they are there
Here is one of the test Passes by Trinidad and Tobago's very own Mohammed ''Turbokid' Ali aka Hummy with his Mazworx built Drag Silvia S15 , SR20 Powered. He had problems on the track in this pass , as you can see @ Orlando Speed World , USA.
T&T Hummy SR20 S15 7.73 @ 180 MPH New Personal Record !!!! @ Orlando in Preparations for the World Sport Compact Challenge this weekend! Congrats to the Team !
Last night Saturday 22nd of August, Mohammed Ali aka Hummy with his Mazworx built 'Team Tekno Toyz' Nissan Silvia S15 Powered by a SR20 VVL Turbo Motor made History by being the First T&T car to break the 6 second barrier with a 6.85 and First to hit 200+MPH with a Trap Speed of 202MPH on a Quarter Mile Drag Strip Run. It was done at the American Muscle VS Imports Shootout Event at the Orlando Speed World Dragway , USA. The Team Tekno Toyz S15 is now the 4th Quickest and Fastest SR20 Powered Car in the World. Other info on the run: