Page 1 of 1
Ford/Mazda WL Cylinder heads
Posted: October 26th, 2010, 10:07 am
by smalls
As the topic says -
Need to find out where I can get a WL 2.5 Turbo Cylinder head.
Any help is greatly appreciated.
Thanks
Re: Ford/Mazda WL Cylinder heads
Posted: October 28th, 2010, 2:34 pm
by twisted mindz_69
boy is better u buy a complete engine in d bamboo cause them head an dem is real money......is about 4000.00 jus for the head an u gettin a complete engine for 7500.00 in d bamboo
Re: Ford/Mazda WL Cylinder heads
Posted: October 28th, 2010, 7:32 pm
by sweeks
Call Browne tomorrow 6844883 and ask him.
Re: Ford/Mazda WL Cylinder heads
Posted: November 1st, 2010, 1:59 pm
by smalls
Got one (brand new) fellas,
Sweeks where is browne located,ended getting one before i checked back this post.
Thanks for your help.
Re: Ford/Mazda WL Cylinder heads
Posted: November 1st, 2010, 4:04 pm
by Mech Mines
hey got brand NEW WL turbo heads, i can offer you its for $3400
youcan check the link for all specs
viewtopic.php?f=41&t=339187
Re: Ford/Mazda WL Cylinder heads
Posted: November 2nd, 2010, 3:02 am
by sweeks
Smalls Brown is located in Couva
Re: Ford/Mazda WL Cylinder heads
Posted: December 4th, 2010, 7:09 pm
by dogpound
got 2 used, looking to get 2500 for 1
Re: Ford/Mazda WL Cylinder heads
Posted: December 6th, 2010, 8:55 am
by V2NR 3.0
Is there something inherently wrong/weak with these heads ?
s ah S15 one time when my engine start playing up
Re: Ford/Mazda WL Cylinder heads
Posted: December 6th, 2010, 3:07 pm
by Cooper
From the research I've done so far, I believe the problem is originating from a poor manufacturing process for the heads in Malaysia. The Heads are also manufactured in Thailand and Japan. Also, some of the older WL's have a poor quality head gasket that can fail easily.
The forums also mentioned that the manufacturing process was changed in Malaysia along with the gasket material a few years back, so newer engines may not suffer the same faith.
IMPORTANT: These are just some notes I've made from forums based in other parts of the world, in other words it's just "talk" from countries mostly in Asia,
but I haven't gotten any info from an actual manufacturer. Still looking for something concrete.
If all of this is true, you then have to figure out where and when your engine was manufactured

In the mean time, read through this thread to be on the safe side:
http://www.trinituner.com/v3/forums/viewtopic.php?f=41&t=314719&hilit
Re: Ford/Mazda WL Cylinder heads
Posted: December 7th, 2010, 7:22 am
by V2NR 3.0
Best article Cooper.
The certified copy yo my van says made in Thailand, or receipt or something i said that being stated.