Moderator: 3ne2nr Mods
Lewwe cut a deal .That job is about $200 , give mih your sis for two hours and we square. She taking it for free anyhowRedVEVO wrote:Rubber Slipper I have a Corgi airplane with a aero front bumper, tail gate and rear bumper to paint from black to teal and flashing pink with a flamingo ribbon at the bottom .
Wwgd
rspann wrote:I just get fed up of the antics that is why I answering him. If somebody don't know me and my business he could give them the wrong idea. Is a good thing everybody on tuner has the same opinion of him. Mother mad and he come out the same irritating way.
MaxPower wrote:rspann wrote:I just get fed up of the antics that is why I answering him. If somebody don't know me and my business he could give them the wrong idea. Is a good thing everybody on tuner has the same opinion of him. Mother mad and he come out the same irritating way.
Spann by chance you have pics of his mother?
eKeith wrote:No tuners have a bake room?
gastly369 wrote:Each pc removed from car and painted separately... All my work goes to him..shows customer everything no hide up and cut corners... Did my previous car as well.. Pics are even before buffing IMG_20200220_181315.jpegIMG_20200209_180423.jpegIMG_20200216_163826.jpeg
nervewrecker wrote:gastly369 wrote:Each pc removed from car and painted separately... All my work goes to him..shows customer everything no hide up and cut corners... Did my previous car as well.. Pics are even before buffing IMG_20200220_181315.jpegIMG_20200209_180423.jpegIMG_20200216_163826.jpeg
who do your car?
this recent?
saw your sis roughing it up last week
what exactly this pic showing?gastly369 wrote:Still have to buff etc... Scraping interior for sound dampening mat.... Bigger stuff going in
A172 wrote:what exactly this pic showing?gastly369 wrote:Still have to buff etc... Scraping interior for sound dampening mat.... Bigger stuff going in
Rovin wrote:somebody say sound dampening mat ? , check me here : ... http://www.trinituner.com/v4/forums/vie ... 8&t=737748
skylinechild wrote:supercharged turbo wrote:
As we on the topic;
1)How long should you wait for the primer to fully cure before applying paint?
2)How long should you wait for the coat of paint to dry before applying the next coat?
3)How long does clear coat take to cure?
4)If you're double clearing,how long should you wait after applying the first set of clear coat before you rub down and clear again?
5)Does leaving a vehicle in the sun after applying clear coat make a difference?
6)Does double clearing make a drastic difference?
ok so i am NOT a painter by trade ..if you want your pc fix yea... dats me..... but i will attempt to answer.....
1. primer does cure ???
i say follow the instructions on the primer.
priming bare metal may be different from priming a surface that already had a previous paint job on it.
also surface prep may be different.
i always thought is to do metal work.... then rust proof and prime then sand down... reapply primer where necessary...... guide coat & sand down ...tack cloth it and get ready for actual paint.....
2. if you doing multiple coats of paint some painters say 10-15 mins - some say 15 -30 mins....
the thing about doing multiple coats is it needs to be done right and the area must be free from dust particles as if any dust settles on the first layer you may not know until its too late....
3.. clear coat curing - have no clue.. some say 3-5 days.... check the clear coat manufacturer....
4. if by double clearing you mean flow coating....
check you the youtube channel called " the gunman"
i'll link it for you....
>>>
5. i wouldnt say leave it in the sun to get cured. reason is clear coat has UV inhibitors which are added to clear coat to prevent the color below from getting faded and dull.
if you put clear coat while its semi wet in the sun.. The UV inhibitors wont be able to protect the paint below and you may be actually causing more harm than good.
6... yes to flow coating... it makes it look more wet and smooth and the gloss is good.....
further questions you can talk to spann... he is the resident paint-ologist on tuner......
Thanks for the advice fellas.rspann wrote:Allyuh disturbing mih. I dealing with a mental case in a next thread . But.
1. Different primers and hardeners have different times. 24 hrs is very safe.
2. Flash off times vary according to reducer and temperature ,so read the instructions. Ten to fifteen minutes is good.
3. Most clear coats cure in 48 hrs . Leaving it longer to dry is better if buffing as all the solvents get enough time to evaporate I leave paint for a week before buffing. Heat curing accelerates the process. Just like a bake room.
4.Double clearing gives a better finish , but it's also unnecessary unless you looking for show finish. The clear can be sanded the next day and re-cleared. I did cars with double and triple clear. The results are outstanding.
5. Make sure to follow the mixing instructions to a T. Less hardener (or more) causes under or over catalysing which causes problems which I won't go into now.
I think one tuner mentioned paint cost $700 so you could pm him to find out where.
One thing I forgot, if you see paint crazing or peeling , don't try rubbing it and priming, you will end up with the same problem. Remove it , epoxy prime and then do any repairs . That is a very technical process though.
gastly369 wrote:Fakkk now seeing post... Already buy mat bro... I'll msg u later on some speakers looking atRovin wrote:somebody say sound dampening mat ? , check me here : ... viewtopic.php?f=8&t=737748
Rovin wrote:gastly369 wrote:Fakkk now seeing post... Already buy mat bro... I'll msg u later on some speakers looking atRovin wrote:somebody say sound dampening mat ? , check me here : ... http://www.trinituner.com/v4/forums/vie ... 8&t=737748
like when u see d price u bawl ... i guessing u paid $40-50\sheet more for some other brand
soon after i posted earlier on i went to sound deaden d front doors of my panel van which thin like ah criz pan , with just 1 layer of buzzmat it sounding like it have 1\4" of filler on it , goes from sounding like clank clank to thudd thudd ...
Return to “Ole talk and more Ole talk”
Users browsing this forum: Google Adsense [Bot] and 159 guests