Postby cornfused » December 9th, 2015, 3:31 pm
Lightly coat with baby oil , leave for an hour and use a scrapper or thin wire .
If the wire method is used , with the sawing motion. Some heat will be generated , so make sure and pry the strip or piece of the liquid nails with a flat tool . In not doing so the heat may cause what was just removed to re stick .
A heat gun or hair dryer would help in getting the adhesive in a workable state .
Last edited by
cornfused on December 9th, 2015, 3:35 pm, edited 1 time in total.
