Moderator: 3ne2nr Mods
nervewrecker wrote:I think I figure out the problem.
The hole in the wall open? Those units have the thermostat in the back. So if the hole open the system will pull air from outside.
During the day it pulls warm air and will think the room warm.
During the night it will pull colder air and think the room cold so it cuts off faster.
Effective designs had that same problem. Henry young, myself and some other dude had to diagnose it.
Job includes but not limited to the ability to handle power tools and equipment within the electrical, mechanical, construction and HVAC field as all overlap.
It is a fast-paced environment where it requires you to be able to follow instructions, think, improvise and learn fast.
Must have knowledge of handling hammer drill, impact driver, level, wire stripper, pliers, ratchet, spanner, crescent wrench, measuring with a tape, taking and reporting of measurements.
Additional responsibilities would be setup and use or pressure washer, managing a manifold gauge, electrical knowledge of single phase 110V AC and single phase 220V AC.
Additional knowledge of 3 phase is an asset.
Reading, understanding and conveying of information is also an asset.
Proper appearance of self as well as housekeeping, punctuality and manners are mandatory. Good observation and awareness of the surrounding environment is a must. Ability to complete jobs in a timely manner and ability to work with deadlines is also a prerequisite.
A form of ID is required as well as information on previous employment and two references are required.
Applicants must submit an essay 100 words or more on what is a job, why are you applying, why are you not employed and what do expect to gain from being employed. This is to make sure applicants can at least read or write.
Please do not apply if the following criteria cannot be met.
https://www.facebook.com/job_opening/41 ... ce=job_ats
Unsuitable applicants will not be acknowledged.
Anyone trying to play smartass with things like "you send me for a container, not what is in it" so you empty the contents and bring the container alone will result in you being terminated immediately.
You see a line burst on a site and stand up gazing at the sky or some form of mishap and you fail to acknowledge it will result in immediate termination.
You jump out the vehicle and your shoe burst so you cant work so you get instruction to stay in the vehicle and have your breakfast so the shoe can be attended to afterwards as its an emergency breakdown and you decide you want refreshment so you walk across an industrial compound to look for a water cooler to get refreshment and you doing so barefoot because you were told to not wear your shoes will result in immediate termination.
You are instructed to park up and you pack up what you alone use and not a coworker, home or time.
You are instructed to lock off work and you leave a pipe running or live electrical wire hanging because you done work and that requires further work but you weren't told to do further work, again - home one time.
You stand up watching the work vehicle open in heavy rain and tools getting wet and you can't secure it because you afraid you get wet in the rain, you will be getting lots of wet because you will be required to leave the job site immediately and / or pay for the equipment damaged from neglect.
You could smoke a pack of cigarette but afraid of dust or smoke in an environment you may as well just leave before getting fired.
You leave tanks open resulting in material escaping and saying nothing or taking a smoke till someone come to inform them, Home!
pjfred wrote:Is yonan a reliable brand of ac?
Yunno, I forgot to take the info off the blower earlier.SR wrote:Whats the average sound level of a 36000 wall mount blower?
Probably servicing of it been running long. Depends on the environment and with the increase in humidity coils get dirtier faster with biological matter.Jerry84 wrote:Got one of those GE r410 12000 btu units installed for the kids a few months ago due to the pandemic and home schooling situation. Wanted them to be as comfortable as possible. My issue is we need to drop the temperature to 20 degrees Celsius and turn the fan speed up all the way for the room to be cool as compared to when it was newly installed. Back then the temperature on 24 and lowest fan speed and the room biting cold. Double checked the mode settings and everything is fine..
Installer came and said it needs servicing so I let him service it but in my opinion it's still the same way.
What could be the possible issue?
All are ahri certified. I would go with lennox daikin or gree.2WNBoost wrote:Good morning all
Excuse me if this was answered previously but what inverter brand would you recommend for living room and bedrooms?
Low noise and reliability being the major factors.
Thank you.
nervewrecker wrote:All are ahri certified. I would go with lennox daikin or gree.2WNBoost wrote:Good morning all
Excuse me if this was answered previously but what inverter brand would you recommend for living room and bedrooms?
Low noise and reliability being the major factors.
Thank you.
All are low noise.
I don't switch off mines.
Return to “Ole talk and more Ole talk”
Users browsing this forum: Duane 3NE 2NR, Habit7, redmanjp, st7 and 341 guests