***Need some help with flow Plz***

kiddo · Postby **kiddo** » October 12th, 2008, 6:49 pm

Hey tunerz I have some trouble with sharing my flow internet on my wireless network, I am using a WAP54G linksys access point.One of the computers is getting local and internet access but the other computer is connecting to the network but is only getting local access. Can any one help me out please....

Postby **r3iXmann** » October 12th, 2008, 6:53 pm

pm pioneer

honda hoe · Postby **honda hoe** » October 12th, 2008, 6:56 pm

buy a ps3

Nasrallah · Postby **Nasrallah** » October 12th, 2008, 7:13 pm

i also have flow and sharing it over a wireless linksys...try resetting the flow modem and/or repowering the linksys

equipped2ripp · Postby **equipped2ripp** » October 12th, 2008, 7:15 pm

both flow and tstt were giving some problems about an hour ago... now both seem to work fine at present.

Postby SR » October 12th, 2008, 7:52 pm

kiddo wrote:Hey tunerz I have some trouble with sharing my flow internet on my wireless network, I am using a WAP54G linksys access point.One of the computers is getting local and internet access but the other computer is connecting to the network but is only getting local access. Can any one help me out please....

are both computers connecting via wireless? or wired connection from the linksys

problem may be you config of the linksys and not flow

jon · Postby **jon** » October 12th, 2008, 8:32 pm

kiddo wrote:Hey tunerz I have some trouble with sharing my flow internet on my wireless network, I am using a WAP54G linksys access point.One of the computers is getting local and internet access but the other computer is connecting to the network but is only getting local access. Can any one help me out please....

What version of operating system are you using? You may want to try the diagnose & repair option available when you right click on the network icon in the system tray...did you restart the computer?

QG · Postby QG » October 12th, 2008, 10:39 pm

kiddo wrote:Hey tunerz I have some trouble with sharing my flow internet on my wireless network, I am using a WAP54G linksys access point.One of the computers is getting local and internet access but the other computer is connecting to the network but is only getting local access. Can any one help me out please....

Oh....you need to set the other PC's IP address to match the one that the flow is hooked up to.
I have the Lynksys G Router and I share connection to my laptop, but I had to reconfigure the laptop's IP to match my PC with Blink.

TK! · Postby **TK!** » October 12th, 2008, 11:28 pm

1. plug flow eternet into WAP port labeled WAN/INTERNET
2. Turn on WAP
3. Plug pc into one of the other ports on WAP or use wireless. Check first PC for connectivity (ie - the icon for the network on the pc loses the x or disappears completely)
4. reset flow modem (stick a pen into the reset button, next to the ethernet port. wait for all light other than the power to go off. release. wait a minute)
5. see if pc! gets online.
5. connect next pc to WAP. check for conectivity and surfing.

if that fails, u can try resetting the WAP. press and hold reset for 8 seconds. wait for all light to blink. release. wait a minute.

then u can add security etc once u'v established connectivity. if that fails. call a tech. 100 and hour ;-)