What's your NEXT MOD ?

[supercharged turbo]

Might be a strut bar or fixing the halos

[Quicksilver]

put in straight driveshaft to eliminate center bearing

relocate air horns to hood

bigger tyres.... 315/80/22.5 up from 295/80/22.5

and more of a fix than a mod, but readjust shifter so 7th gear will go in a little easier

[X2]

NOICE !

Some good plans for lots of tuners !

What else ya got ?

Hoping to put in a single Recaro and 4 point to tighten up the seating during dex:



Hoping I can get the harness cheap...

[Kinday]

Praises X2...finally a real thread worthy of a post

I'm in restoration mode these days, fixing what needs to be touched but next mod is gonna be suspension and engine mount upgrade

[X2]

Update the thread when you DO get the mod done ! Let's see what ends up on the ride versus what ends up to be ole talk ...

[SmokeyGTi]

Now put some window shades thingys on the van. Next step is a crash bar up front

[3stagevtec]

I'm looking to get this fella plumbed into the Zuki..

[mpower]

hmmmmmmmm, 1)maybe a set of boysen reeds and a new platium pro circuit pipe for my supermoto, oh and fabricating rear brake adapters.!

2) the new aem water/meth kit for the ole car.
3) custom plenum with 50mm itb's for the sr

[cinco]

4 wheels disc upgrade
need to redo my whole exhaust as its riddled with little holes
oh new tyres for dex

[BrotherHood]

4 wheels disc upgrade

THIS

...after my retrofit.

[Aaron 2NR]

Changing shifter bushings, clutch, end links...upgrades...

[predator007]

some aftermarket floor mats,hoping to get ah extra 2 hp

[Picasso]

Garrett GTX42R turbo
6 Siemens 670cc injectors

[Ted_v2]

My next mod will be a different car!!

x2
just doing basic maintenance in the daily.

next vehicle gonna be a subby

[cinco]

My next mod will be a different car!!

x2
just doing basic maintenance in the daily.

next vehicle gonna be a subby

What is your daily?

[Ted_v2]

using a ck lancer right now.

[skylinechild]

next upgrade will be strut bars and lowering spring / shock...or it may be a rear disc brake assembly with steel braided lines.

[Back2Studio]

In a U14 Bluebird SSS

[3stagevtec]

Garrett GTX42R turbo

That's a bigg fella!

[Picasso]

Garrett GTX42R turbo

That's a bigg fella!

Yup.. I'm not half stepping this time

[cinco]

In a U14 Bluebird SSS

You gonna cage your dd?
Terrible idea unless u drive with a helmet on 24/7

[MG Man]

already did a suspension job on flappyroof...now I need to get the clutch replaced. Only 94whp so going with a stock OEM clutch....after that, I'll probably look at a chip upgrade and CAI

[Hook]

No major mods for now, really. Just maintaining the ride.
I break these WAAAY too often.


This is a consideration now.


This might be easier on my cross-member bolts though. So I'll try this first.

[VexXx Dogg]

@Hook, yuh geeing them plenty hard launches or what?
How come yuh rupping through mounts so?

[Lance]

Next set of mods on the Subaru.. Front mount intercooler, full rotated turbo setup, borgwarner s200sx, ID1000 injectors.

Currently at 300whp.. Looking to take it to 400whp

[Hook]

@Hook, yuh geeing them plenty hard launches or what?
How come yuh rupping through mounts so?

meemkno wha I does be doin so to buss rear mounts like rubberband, but is presha to change so I wanna avoid having to do it so often

[Aaron 2NR]

big power business

[Hook]

not even...less than 150hp/tq

[cinco]

@Hook, yuh geeing them plenty hard launches or what?
How come yuh rupping through mounts so?

meemkno wha I does be doin so to buss rear mounts like rubberband, but is presha to change so I wanna avoid having to do it so often

Yuh try oem mounts?
If u put poly on one mount d rest does start to fail faster due to more stress on them

[Hook]

Yup. All oem mounts thus far. I'll just get another and fill it. See how that goes.