:: The official TOOLS thread ::

[Ted_v2]

cordless drills tech is much far advanced than long time, i remember i had a 18v black and decker couldnt drill 8 screws into a piece of 2x4. Now i have a lil jokey m12 that shooting out 100 screws with ease, finishing job with battery still on half.

I drilled thru 5 holes on a rotor already, battery level didnt even drop one bar. M12 line is the bomb

[Chimera]

i would be looking for a milwaukee cordless hammer drill that using m18 battery as i done have a few m18 batteries

[Ted_v2]

Yep m18 line should be decent.

wanting a 1/2 electric impact for a while now. 350USD

[Ted_v2]

Anyone locally sells roll lock pads and the pad holder for a 1/4 shank?

[supercharged turbo]

Where can I get an engine stand reasonable?

[cutthroatInt]

Where can I get an engine stand reasonable?

Elsocorro road has a tools place on the left coming from highway. Close to holiday foods.

Paid 800 for mines a few years now. Tink it's 1200 now.

And saddle road has a tools.place also

[cutthroatInt]

Yep m18 line should be decent.

wanting a 1/2 electric impact for a while now. 350USD

Tools and things sold me a corded milwaukee for 1400. Every other place was 1800 up for any brand

[nervewrecker]

Anything i can use to add color to epoxy resin?

[pugboy]

I see the woodworker guys abroad use some kind of powdered coloring for those poured epoxy tables
Doubt it is available locally

[pugboy]

Looking for some aluminum or stainless pipe 3/4"
Anybody else besides Lotec supplies or has scrap ?

[hong kong phooey]

Looking for some aluminum or stainless pipe 3/4"
Anybody else besides Lotec supplies or has scrap ?

Dansteel has also
I bought a length recently 3/4 aluminium

[pugboy]

thanks, they are only in south ?
I wonder if bhagwansinghs has

Looking for some aluminum or stainless pipe 3/4"
Anybody else besides Lotec supplies or has scrap ?

Dansteel has also
I bought a length recently 3/4 aluminium

[adnj]

Looking for some aluminum or stainless pipe 3/4"
Anybody else besides Lotec supplies or has scrap ?

If you can use 10ft lengths, maybe rigid aluminum conduit from Modern Electric.

[adnj]

I need a budget friendly, auto-darkening welding helmet. Is there any place in North or Central that has one? Thanks.

[supercharged turbo]

You can check Edoo's in North.Bought mines there and it works great

[racedriverpro]

Looking for a T70 torx. Preferably east west corridor. Need urgent. Thanks

[pugboy]

The ingco tool brand has one, looks to be very similar to all the Chinese ones which edoos etc sell for a lot more.
I saw it somewhere for $300 I think, call nwt enterprises to find out which of their retailers have it.
They pushing the ingco tools in a big way, yellowish packaging like Dewalt.

I have three of those Chinese helmets and they work well.

I need a budget friendly, auto-darkening welding helmet. Is there any place in North or Central that has one? Thanks.

[pugboy]

Hey Spann,

I was able to use the steering universal joint on a rotisserie setup.
Using a wheelchair motor with chain gear reduction.
Got the aluminum pipe in chaguaramas.

Much thanks,

The steering shaft with couplings? Pass through.

[car]

Anything i can use to add color to epoxy resin?

Food coloring or concrete pigment the powered kind will work. Not much as it will weaken the epoxy

[rspann]

Hey Spann,

I was able to use the steering universal joint on a rotisserie setup.
Using a wheelchair motor with chain gear reduction.
Got the aluminum pipe in chaguaramas.

Much thanks,

IMG_0094.PNG

The steering shaft with couplings? Pass through.

You real skillful boy!

[rspann]

Anything i can use to add color to epoxy resin?

Food coloring or concrete pigment the powered kind will work. Not much as it will weaken the epoxy

Nervewrecker, you could get the tints by Marc One in Chaguaramas.

[nervewrecker]

Anything i can use to add color to epoxy resin?

Food coloring or concrete pigment the powered kind will work. Not much as it will weaken the epoxy

Nervewrecker, you could get the tints by Marc One in Chaguaramas.

Lawd, so far i have to go.

[X_Factor]

Shiloh Enterprises (1998) Ltd 30 Haven Cr, Tacarigua, Trinidad - 640-2363
usually get from them as well

[Slacka69]

fellaz I looking for an electric planer 3062616

[X_Factor]

amazon and with the father's day special you could get a good deal.....for a inexpensive tool its quite expensive locally

[Ted_v2]

SSL having rell thing, check their facebook page

[adnj]

Thanks for the info. I picked one up on Friday.

The ingco tool brand has one, looks to be very similar to all the Chinese ones which edoos etc sell for a lot more.
I saw it somewhere for $300 I think, call nwt enterprises to find out which of their retailers have it.
They pushing the ingco tools in a big way, yellowish packaging like Dewalt.

I have three of those Chinese helmets and they work well.

I need a budget friendly, auto-darkening welding helmet. Is there any place in North or Central that has one? Thanks.

You can check Edoo's in North.Bought mines there and it works great

[pugboy]

looking for good quality ceiling fan, not indoor fancy looking one
also an industrial fan on pedestal, not plastic lasko

[*KRONIK*]

Bhagwansingh for ceiling fan

Pricesmart had some all metal fans a while back
Not sure if they still have stock

[X_Factor]

some new hand tools to the mix