GOULDS WATER PUMP

[mohan]

hey dudes meh water pump not wukin, i repaired d motor but it not pumpitating, without water d motor running as soon as i put water in d system d motor slowing down an heatin up.

i lookin to buy a new one 1/2hp goulds used

[.:PROZAC:..]

but it not pumpitating

The pumpitating valve in these does go and usually have the same smptoms.

I'd check the pressure sensor switch, it's adjustable and sounds like yours is running/

[mohan]

i changed d pressure switch

[demented]

Call Hardware Associates 88
678-3343

[Damien]

The tank have 30psi of air in it ?

[mohan]

i have a 2 gall tank with 25 psi in it

[Damien]

i think it supposed to be 30 psi, see if the motor is spinning in the right direction clockwise from the back

[Goolie]

i changed d pressure switch

where u bought one, n whats the price.. i need to change mine as well.

[mohan]

the rotation is correct, only way to change dat is to change the winding connection inside the motor

i got the pump from sum1, free ting na, dey had it put down and rust build up inside, iclean it up and now trying to get it to work

[mohan]

i called hardware associated and he tell me to check my voltage supply or low low voltage

[tr1ad]

if it not pumpitating it could be the appa dappa valve

[janfar]

You should also see if the achurator is fully functional. If it is then you could have a bad sogglenoid.

[INDAVID WORKSHOP]

If willing you can open the pump housing and change out the impellar and other parts in there, I did that with mine and works like new - easily 60 psi.

All parts available in any hardware.

[Shio]

[Dragist]

if it not pumpitating it could be the appa dappa valve

Not necessarily he needs to make sure that the Tank is Presuretating and that the Impeller is Spinningitating .

[Anil_Sooknanan]

Low voltage, poor electrical connection, and a faulty capacitor can cause this

[larafan]

mathuras does sell water pump

[A172]

if it not pumpitating it could be the appa dappa valve

ROFL

[mohan]

yeh most likely it not voltagetating enough so i go be busy dis weekend diggin up in d damm ting, knowing me i have to find d problem

[ronsin1]

mohan, bai wah is the scene dey bai long time bai. Aye dese Lall bai from Ptown bai yuh remember meh

[crazybalhead]

Click here for your solution to the pump issue.

[dreadman]

hey dudes meh water pump not wukin, i repaired d motor but it not pumpitating, without water d motor running as soon as i put water in d system d motor slowing down an heatin up.

i lookin to buy a new one 1/2hp goulds used

sounds like the impeller is installed wrong side creating a wrong flow direction.
pressure inside the tank supposed to b 20psi(this is the recommended pressure) cut in pressure supposed to b 20psi and cut out pressure supposed to b 40psi........anything more dan dat can damage the diagraphm inside the tank.
what u can also do is open the motor cover and see if the centrifugal switch is moving directly over the shaft

[rolandk]

pump can be repaired.

if you have the time and inclination, carry it to the blind pump repair man just opposite Sando Tech.

he is a few houses from the cricket ground.

no tel#, no waiting, he repairs on the spot.

[crazybalhead]

Wait, is pumpitating the man say dey????????????

[dreadman]

^^^^yea man when i read it d first time i real laugh yes

[mohan]

aye lall waz d scene dread

[mohan]

roland where is d blind man repair dude is?????

[mohan]

[tr1ad]

d blind man an all cyah give directions

[crazybalhead]

Pumpitate...