Page 1 of 2
WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: April 23rd, 2015, 12:53 am
by spanglish1
I would like to install a water meth kit on a b8 audi a4 1.8t. For the experienced euro men who have the balls to attempt to modify euros in trini who would you let touch your car to do this mod?Has anyone done this yet? Feedback would be greatly appreciated.
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: April 23rd, 2015, 7:56 am
by Allergic2BunnyEars
*subscribed*.
Have you checked international forums yet? Also have you done stage 1 remap yet?
WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: April 23rd, 2015, 8:04 am
by 1kingmed
Delete
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: April 23rd, 2015, 9:44 am
by spanglish1
Allergic2BunnyEars wrote:*subscribed*.
Have you checked international forums yet? Also have you done stage 1 remap yet?
I have seen a few installs in Australia with meth kits. In terms of stage 1 remap no i have not done this only because of the fact that i would have to switch to premium @ 95 octane to match the available tunes out there. As my car is a daily driver on the north south highway gas consumption is vital. At $360 a tank for premium which doesnt last me more than 3 days (lead foot) super is my only option. I would be testing some special additives (iso prop alcho) with the super to see if there is any improvement in performance mainly acceleration.
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: April 24th, 2015, 10:19 am
by Gool
i would like to know the outcome of this. given the high humidity on the island, i'm just curious to know the difference it would make. please dyno before and after if you decide to install a kit.
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: April 24th, 2015, 2:11 pm
by TriniVdub

Wheel Wizard's A4 already has this mod done. Easy to do.
https://www.facebook.com/groups/wheelwizardltd/
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: April 24th, 2015, 7:51 pm
by spanglish1
Anyone knows who did the mod work on this audi?
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: April 24th, 2015, 8:47 pm
by spanglish1
gonna pass by tomorrow and see if they willing to share some info. has anyone remapped their b8 a4 for super? im bored with the car and looking to upgrade it a bit
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: April 24th, 2015, 8:57 pm
by EcoTune Trinidad
These newer direct injection engines are not to be remapped for our super 91RON - unless you got a spare engine waiting for installation at a later date.
Or Meth and Super right through..
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: April 24th, 2015, 8:59 pm
by EcoTune Trinidad
Gool, Meth makes a decent improvement 7-10hp approx on stock map, tuned form 10-20hp depending on application
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: April 24th, 2015, 9:08 pm
by Allergic2BunnyEars
How much hp does the 1.8t in your a4 do on super?
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: April 25th, 2015, 8:30 am
by Gool
Yeh thats what i wanted to know. i figure the hp gain in trinidad would be different from the hp gain, lets say... england. different humidity. i am thinking they would see a bigger difference before and after as opposed to us here.
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: April 26th, 2015, 8:44 am
by spanglish1
so information not being shared. Banzai where yuh? think uh boy could do this install?
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: April 26th, 2015, 8:49 am
by spanglish1
EcoTune Trinidad wrote:These newer direct injection engines are not to be remapped for our super 91RON - unless you got a spare engine waiting for installation at a later date.
Or Meth and Super right through..
Thats the intention but the car would now become a weekend driver so im going premium with meth, de catted exhaust and remap. im looking for approximately 200hp so those mods should put me there safely.
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: April 26th, 2015, 9:15 am
by EcoTune Trinidad
You'll cross 200hp for sure with those for sure...dont forget forge diverter valve
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: April 26th, 2015, 9:58 am
by TRDGUY
^ I actually took out my forge diverter and replaced it with the newer development "D" valve ( piston type opposed to diaphragm )
With the forge the boost levels were fluctuating a bit but with this new diverter it's extremely smooth
GL op
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: April 26th, 2015, 10:08 am
by DVSTT
*subscribed*
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: April 26th, 2015, 6:52 pm
by EcoTune Trinidad
TRDGUY wrote:^ I actually took out my forge diverter and replaced it with the newer development "D" valve ( piston type opposed to diaphragm )
With the forge the boost levels were fluctuating a bit but with this new diverter it's extremely smooth
GL op
What colour spring you had in yellow or green?the former handles up to 23psi I believe...green is more than 23psi
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: April 26th, 2015, 10:06 pm
by spanglish1
update guys the owner of that sweet audi above got back onto me tonight with some great information. he has agreed to visit the euro forum and do a post about the ride. This should inspire some men to start a trend.
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: May 2nd, 2015, 11:42 am
by Gool
Great! would like to see his setup. thanks Spanglish1
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: May 2nd, 2015, 1:33 pm
by Monk BANzai
*walks with copybook with chequered pages and "lead" to learn from this class....
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: May 2nd, 2015, 1:36 pm
by Monk BANzai
TRDGUY wrote:^ I actually took out my forge diverter and replaced it with the newer development "D" valve ( piston type opposed to diaphragm )
With the forge the boost levels were fluctuating a bit but with this new diverter it's extremely smooth
GL op
is this on a B7 or B8?....
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: May 2nd, 2015, 3:18 pm
by Morpheus
B7
That's the guy with the manual S-line Quattro.
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: May 3rd, 2015, 10:43 pm
by spanglish1
i have the list of most of the mods but i cannot divulge! all i can say its VERY LONG!Meth kit being purchased this week.
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: May 4th, 2015, 2:41 pm
by Monk BANzai
why you cant divulge? thought the purpose was to share information as it pertains to the Meth installation?
*goes back to the guys at Audizine yes.....
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: May 4th, 2015, 3:55 pm
by Allergic2BunnyEars
Can anyone say how much hp the 1.8T B8 A4 does on super?
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: May 4th, 2015, 7:41 pm
by spanglish1
BANzai Rastafarai wrote:why you cant divulge? thought the purpose was to share information as it pertains to the Meth installation?
*goes back to the guys at Audizine yes.....
The owner prefers i not list them and i have to respect the guy's wishes. BUT banzai uh know how to find meh so uh could walk with ur double line copy book and lead pencil and a sharpener. I am purchasing my meth kit this week and i would document my install for fellow tuner audi men to follow.
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: October 30th, 2015, 9:34 pm
by spanglish1
meth kit in hand looking for a knowledgeable euro mechanic to install this together with a forge diverter valve on my b8 a4 guys. Want to deal with a special jetta soon
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: October 31st, 2015, 10:02 am
by EcoTune Trinidad
Re: WATER METH KIT INSTALLATION ON B8 AUDI A4
Posted: October 31st, 2015, 10:52 am
by TRDGUY
^ can't remember tbh the spring color, I did a total reinstall of the turbo with new solenoids and diverter when I de- cat