TriniTuner.com  |  Latest Event:  

Forums

Engine Hard Start

From Escorts to Rangers - First On Race Day

Moderator: 3ne2nr Mods

Mark11k
Riding on 13's
Posts: 1
Joined: January 31st, 2021, 9:24 am

Engine Hard Start

Postby Mark11k » January 31st, 2021, 9:37 am

Hello every one,

I need some help here.
I have a ford Ranger XLT , TCD High Rider ,Automatic 4x2 model 2.5l with the Rail WE engine.
Giving Trouble to start when cold.
Mechanic Check - Pressure test- did 220,
All Glow plugs good,
primer pump good,
Heater cutting off at 6 seconds,
Battery good 950 Cranking Amps,
Engine doing just over 200k,
Service injectors while installed,
Also scan the van 3 Times- Noting showing up, different scanner guys.

Can anyone tell me what may be causing this. The mechanic say that the engine don't need to be redone as its not vibrating rough when started, and its not black smoking, its smoking a little only when start up. When the engine is hot its starting ok.
Anyone can you advise me whats the issue. Would be greatly appreciated. Thanks

ruskie
Street 2NR
Posts: 57
Joined: September 18th, 2009, 7:24 pm

Re: Engine Hard Start

Postby ruskie » April 20th, 2021, 9:47 am

I have a 3.0 L thunder, 200 k on the engine. Same symptoms for over a year. Did all what you did. Glow plugs, service injectors, new battery, check compression. Used to take 6 to 8 secs to start after clicking the glow plug light 10 times before starting. About 3 weeks ago, started getting worse. Got a new battery... Same thing. Sent the starter to get rewired and now it starting like it new out the shop. Also, my mechanic, a few months ago did not like how the starter wiring looked and redid the cabling to it. Now, I am not repeatedly lighting the coil light and it is starting in 2 to 3 seconds, even if I leave it for a few days.

YellowCanary
Riding on 13's
Posts: 14
Joined: March 7th, 2023, 11:24 am

Re: Engine Hard Start

Postby YellowCanary » June 21st, 2023, 11:34 am

I also have a 3 L Thunder and I notice the ignition lights coming on normal but some times I hear a ONE click sound and does not start. Carry it by a guy paid 2.5K work good 4 mths later same thing just took it but another guy. I am waiting to see the price

User avatar
nervewrecker
3NE 2NR Power Seller
Posts: 23548
Joined: July 31st, 2007, 2:27 pm
Location: The world is fl4t

Re: Engine Hard Start

Postby nervewrecker » June 23rd, 2023, 5:27 pm

Sounds like starter. Got that problem before in a bt50 and same problem with a frontier now.

Could be brushes, brushes need servicing, rotor poling or solenoid weak.

ruskie
Street 2NR
Posts: 57
Joined: September 18th, 2009, 7:24 pm

Re: Engine Hard Start

Postby ruskie » June 24th, 2023, 9:00 pm

YellowCanary wrote:I also have a 3 L Thunder and I notice the ignition lights coming on normal but some times I hear a ONE click sound and does not start. Carry it by a guy paid 2.5K work good 4 mths later same thing just took it but another guy. I am waiting to see the price
I went by Congo in Diego to rewire the starter. It was quite cheap, a few hundred. I asked him if it made sense to try to source a new starter...he said if it happens again, he could just rewire it again no problem. So far, the issue has not recurred.

User avatar
nervewrecker
3NE 2NR Power Seller
Posts: 23548
Joined: July 31st, 2007, 2:27 pm
Location: The world is fl4t

Re: Engine Hard Start

Postby nervewrecker » June 24th, 2023, 11:13 pm

Rewire or rewind?

How do you rewire a starter? Unless you mean changing the leads and trigger wire etc.

ruskie
Street 2NR
Posts: 57
Joined: September 18th, 2009, 7:24 pm

Re: Engine Hard Start

Postby ruskie » June 29th, 2023, 10:26 am

nervewrecker wrote:Rewire or rewind?

How do you rewire a starter? Unless you mean changing the leads and trigger wire etc.
He did a service....I guess clean and rewind, possibly? It wasn't expensive and it was quite quick.

Advertisement

Return to “FORD”

Who is online

Users browsing this forum: No registered users and 3 guests