Page 1 of 1
Help with Mazda 3 A/C
Posted: April 25th, 2016, 5:22 pm
by Coke_AA
Hello, my blower stopped working in my 2010 Mazda Axela (roro), checked it by an electrician and an AC guy both said the blower motor needs changing, the part is a problem to source and to change it takes time and experience, do you all know any good, reliable auto AC people who deals with these models Mazda, also persons who give guarantee on there job, preferably in the east or south areas, thanks
Re: Help with Mazda 3 A/C
Posted: April 25th, 2016, 6:09 pm
by medalist
If you have had the electrical part checked already and it rules out the blower motor as bad. If this system is similar to the Mazda BT 50 It is very simple to remove the blower motor. Remove the glove compartment on the passenger side. To the left you will see a circular black box. That is the blower motor. If you look carefully at it it will have 3screws if i'm not mistaken and an electrical connector jack. To remove the motor, simply disconnect the electrical jack and remove the 3screws, the motor will come right off.
Take it to a Used parts place and ask for that(it doesn't have to be for that vehicle in particular it can be a similar one from another vehicle with same electrical connection and sizing),then simply replace it yourself. If you want new motor try southern sales, marud's, and well whoever else has Mazda parts.
Re: Help with Mazda 3 A/C
Posted: April 28th, 2016, 8:49 pm
by Coke_AA
Thanks pal, will do!!
Re: Help with Mazda 3 A/C
Posted: August 4th, 2016, 10:43 pm
by morphin
I think I have a similar problem...what did you eventually do?