Page 1 of 1
LF: Mazda BJ engine mounts
Posted: October 20th, 2012, 9:43 pm
by Tizic1086
lookin 4 right side and back engine mount, cud be foreign used! THANKS ppl..
Re: LF: Mazda BJ engine mounts
Posted: October 22nd, 2012, 11:19 am
by TurboDrive
Check Chaguanas auto supplies or checks in San'do.
Re: LF: Mazda BJ engine mounts
Posted: October 22nd, 2012, 4:14 pm
by 647
I got the back mount (the one thats attached to the fire wall) its a substitute brand i bought but never used. Selling for $150.00 and i will even throw in a used right side mount (not sure how good it is tho) Call on 370-6274 if you want it. Located in Gasparillo
Re: LF: Mazda BJ engine mounts
Posted: October 26th, 2012, 4:35 am
by Canewell05
A few months ago, I bought 4 engine mounts from Matura's in POS. The back mount is a hellofva thing to change. You have to drop the whole front just to do that. After going through all sorts of trouble to change it, turns out that that mount was actually in a pretty good condition and did not need changing, even though the other three definitely needed to be changed. My suggestion to you is to buy the other three mounts and leave the back mount alone as it will more than likely be in a good condition and not worth the effort to get it changed. The other 3 mounts can easily be changed.
Re: LF: Mazda BJ engine mounts
Posted: October 26th, 2012, 3:46 pm
by cinco
Canewell05 wrote:A few months ago, I bought 4 engine mounts from Matura's in POS. The back mount is a hellofva thing to change. You have to drop the whole front just to do that. After going through all sorts of trouble to change it, turns out that that mount was actually in a pretty good condition and did not need changing, even though the other three definitely needed to be changed. My suggestion to you is to buy the other three mounts and leave the back mount alone as it will more than likely be in a good condition and not worth the effort to get it changed. The other 3 mounts can easily be changed.
worst advice ever
i would advice you change ALL the mounts at the same time
old rubber will wear alot faster than new rubber so when u change the others the older one will wear out fastest
Re: LF: Mazda BJ engine mounts
Posted: October 29th, 2012, 5:26 pm
by Strugglerzinc
That and you don't need to drop the entire front subframe either. The bolts are accessible from the top with the proper tools and knowledge.
Re: LF: Mazda BJ engine mounts
Posted: November 19th, 2012, 6:39 pm
by trini76ster
Don't buy those cheap Korean mounts. Get the good stuff by Southern Sales, they will last a lot longer...