trinituner.com

Why do BJ transmission give so many problems and what can be done to help preserve them????????????

*lawd have mercy. I'm gonna testify in a mazda thread*

What problems do the BJ transmissions give?
out of the three around, regular maintenance (fluid change), properly working radiator and fans, and so far no problems?

You can install a tranny cooler

correct tranny fluid is a must ....

i also had problems with my bj tranny

nareshseep wrote:You can install a tranny cooler

Well that next on the list, someone recommended i can get one in cocoyea.

libra wrote:correct tranny fluid is a must ....

Using Redline now.

well all i could say is wht wagonrunner said in the five years i've had my car i've had a grand total of 0 tranny related problems that i didnt create and it was just one i tried to race a sr20 in a bluebird using my tiptronic and shifted from 4th to 3rd and blew a solenoid

red bwoy,
that tiptronic allowed you to do that, or you held the lever at "-" trying to downshift?

it shifted to third at about 150km/hr it ran well untill i shifted to fourth reached the speed cut at about 180 somebody and when i slowed down AT light started blinking when i scanned next day it showed pressure control solenoid bad i drove it like tht for months den the third gear wen i just changed tranny and no probs since tht

These transmissions need a D4 ATF and the transmission filter needs to be changed at around 15k. This seems to be working great for us. Also yes try to get an external transmission cooler but not a very large one as the tranny pump is not so great. Yes the main reason is better cooling but it also removes that dangerous cooler in the ticking time bomb called a radiator. If it ever overheats it will burn the tranny oil and take engine and transmission with it as well... Learned this the hard way

i think i need a scan for mine, when i got it from the painter, the AT light blinking, no problems though, working fine, may be getting the same thing redbwoy got?