Page 1 of 1
Mazda RX2 Suspension and Diff Conversion question
Posted: July 8th, 2011, 8:22 am
by spanishchick
I was told that everything thing from the Shocks down to the Brake Spindle from a first gen RX7 will work is this true? I'm getting some parts from a RX7 really cheap so I wanted to know if it will work.
Re: Mazda RX2 Suspension and Diff Conversion question
Posted: July 8th, 2011, 11:08 am
by cinco
Re: Mazda RX2 Suspension and Diff Conversion question
Posted: July 10th, 2011, 7:04 am
by gready123456
mazda b1600
Re: Mazda RX2 Suspension and Diff Conversion question
Posted: July 12th, 2011, 9:14 am
by spanishchick
gready123456 wrote:mazda b1600
I was told that the Diff from the old time Mazda Panel Van...the one with the double back wheels is also a direct swap. Does anyone know what the Gear Ratio is on either the Mazda 1600 PU or the Mazda double back wheel Panel Van?
Re: Mazda RX2 Suspension and Diff Conversion question
Posted: July 12th, 2011, 11:12 am
by cinco
your best bet is to get a 1st lsd diff and use the guts
Re: Mazda RX2 Suspension and Diff Conversion question
Posted: July 12th, 2011, 9:49 pm
by spanishchick
cinco wrote:your best bet is to get a 1st lsd diff and use the guts
1st? in terms of 1st Gen RX7?
Re: Mazda RX2 Suspension and Diff Conversion question
Posted: July 13th, 2011, 1:34 pm
by rxforever
lose the chromes...it bunnin meh eye!!!!!
Re: Mazda RX2 Suspension and Diff Conversion question
Posted: July 13th, 2011, 2:05 pm
by cinco
spanishchick wrote:cinco wrote:your best bet is to get a 1st lsd diff and use the guts
1st? in terms of 1st Gen RX7?
yup 1st gen
use the guts in your diff housing
Re: Mazda RX2 Suspension and Diff Conversion question
Posted: July 13th, 2011, 11:30 pm
by spanishchick
Re: Mazda RX2 Suspension and Diff Conversion question
Posted: July 14th, 2011, 6:14 pm
by gready123456
Re: Mazda RX2 Suspension and Diff Conversion question
Posted: July 14th, 2011, 10:03 pm
by spanishchick
Well I was going to surprise my fellow RX2 Rotor Heads with this next pic...but now that I saw these wheels well I just had to get your opinions..the Rex spent the last few days in a bodyshop getting a little makeover. Due to budget constraints I couldn't go all out but I did change the color to a similar Yellow and added some Metallic Gold Crystals in the Clearcoat....hopefully the Rex will be parked back at my house tomorrow..lol...and again thanks "gready123456" for showing me these wheels they look awesome!!This pic was taken out about an hour ago, the pic is a little dark, I will post a daylight pic tomorrow. 
Potential Axis Wheels and it comes in 3 or 4 finishes...not just this one. http://www.axiswheels.com/og-wheels 
Re: Mazda RX2 Suspension and Diff Conversion question
Posted: July 15th, 2011, 2:06 pm
by cinco
wooooahhh
you need to clean this thread up and make it an official build thread
Re: Mazda RX2 Suspension and Diff Conversion question
Posted: July 17th, 2011, 12:16 am
by rxforever
i like the first set on the white...have a set like that on the orange RE don't know if it will fit..remember the one in arima...
Re: Mazda RX2 Suspension and Diff Conversion question
Posted: July 17th, 2011, 12:33 am
by rxforever
cant wait to finish mine so we could lime....13b bridgey....52 IDA..HEAR ME A MILE AWAY
Re: Mazda RX2 Suspension and Diff Conversion question
Posted: July 18th, 2011, 8:59 am
by spanishchick
rxforever wrote:cant wait to finish mine so we could lime....13b bridgey....52 IDA..HEAR ME A MILE AWAY
Boy...could you imagine the sound of 2 Bridgy RX2 coming down the highway?....lol...the noise alone will scare ppl off the road!
