trinituner.com

yes people looking for the ever elusive part that you just cant seem to find maybe i can help you out i got a wide range of parts check my list.

to many sub categories to list so here are the main ones
if not sure of what the part is exactly ive pdf diagrams to help out as well.

and to the mazda 3 & 6 guys yes i got spark plug wires too

protege guys who want the rear brake conversion got that too. its genuine oem so its sort of pricey but im thinking if i get you the basic parts for it, you can get the rest down here for small money.

so give me a holla 759-8266 Mic aka sway or email: alyamagata@hotmail.com

and the guys with the sport 20 or rss i got you covered as well

Air conditioner and heater
Alternator
Automatic transaxle
Back glass
Body hardware
Brakes
Clutch
Console
Cooling
Cooling system
Cowl
Electrical
Emission system
Engine
Engine / transaxle
Exhaust system
Fender
Front bumper
Front door
Front drive axle
Front lamps
Front suspension
Fuel system
Grille
Hood
Hvac
Information labels
Instrument panel
Maintenance & lubrication
Manual transaxle
Pillars rocker and floor
Quarter panel
Rear body and floor
Rear bumper
Rear door
Rear lamps
Rear suspension
Restraint systems
Roof
Seats and tracks
Starter
Steering
Steering column
Steering gear and linkage
Steering wheel
Trunk lid
Wheels
Windshield

also i saw some nice kits these are front bumper pics 95-98 bj 01-03 protoge as well here are some of them

1st gen rx7 parts?

Yes 1st 2nd and 3rd Gen parts

good stuff bro pm me the price for some headers and a 2inch exhaust system for a 02 protege if possible thanks

pm sent shimon

hey guy, I need the left rear hub for a 2nd gen rx7... Can u help me out ?

pm sent lanevo

Looking for a rx8 front under shield.....http://mazmart.com/ItemDetail.aspx?id=2156 new or used......

j,s pm was sent

hey buddy do you have any fog lights for the 02 bj protege i need a right side asap any fluffy floor mats btw?? or plus i herd there is a stabiliza bar that goes on the engine do you have it last ? what suspension parts you have

pm sent shimon

I need the clips for the fuel line for a 2006 mazda 6!

PM sent spiri r

bump

may need a few items soon

Great guy here BUMP for Red!

shimon wrote:good stuff bro pm me the price for some headers and a 2inch exhaust system for a 02 protege if possible thanks

Ditto !

MAZDA 3 04+ BRAKE PADS BY CENTRIC.STOPTECH

StopTech Street Performance Brake Pads

StopTech Street Performance Brake Pads are engineered to meet the demands of high performance driving while maintaining the refinement and comfort expected in everyday driving conditions. StopTech brake pads combine the benefits of premium street brake pads with aggressive friction formulas suitable for track day and autocross use. Para-aramid composites are specially formulated to provide linear responseat both cold and hot temperatures.
• Para-aramid composites provides linear response regardless of pad temperature.
• 100% positive molded for uniform friction material density.
• Low dust formulation is rotor friendly and leaves wheels cleaner
• Scorched to raise initial cold effectiveness and easy bed-in

Posi Quiet Brake Pads by CENTRIC

• Extraordinary wear and fade resistance means superior braking performance for all driving styles.
• Posi Quiet friction formulas create less dust keeping wheels cleaner.
• All Posi Quiet friction formulas are 100% asbestos-free.
• Highest quality OE-designed shims reduce vibration ensuring noise-free braking.

MOOG SUSPENSION PRODUCTS

. Moog rubber bushings are designed to reduce vibration and absorb noise. Our advanced thermoplastic bushings absorb vibration and noise and deliver better handling and longer life, while providing the performance of urethane without the “squeak” normally associated with it. They are not affected by oils, alkalines, ozone or hydrocarbons; can withstand extreme weather conditions; can carry substantial loads; and will not discolor or crack with age. Moog offers a broad range of application-specific sway bar bushings as well as universal and heavy-duty bushings. All Moog bushings and endlinks are designed to meet or exceed OE specifications.



MOOG END LINKS $755.00 RR/$355.00 FR ea.
STOPTECH STREET PERFORMANCE PADS $900.00 FR/$975.00 RR
CENTRIC POSI QUIET CERAMIC PADS $750.00 FR/$800.00 RR

for more info
phone: 759-8266/340-9421 (Michael)
email.r_fraction@hotmail.com/alyamagata@hotmail.com

looking for a 2nd gen series 5 TII turbo gearbox rebuild kit or complete gearbox mine working but its been making some bearing noise and recently started to hear a grating noise in first gear.
PM or call 724-6747

pm sent dayne

pm sent dayne

hey bro i'm looking for a windshield for the 1997 gf 626 any help will be great!

got it!!!!

do you still have parts available lookng for 323bj bumper fogs or ordinary pm me please

liking dem bumpers....

hey man, if you have any transmission parts for the 323 bj singapore model give me a call ASAP. call me @ 293-9525. need those parts as possible as soon. thanks

hey looking for a map sensor for a series 7 rx7! any help would be appreciated

viewtopic.php?f=35&t=411238

hey man. can you assist?
lookin for a front left door regulator and a front right door complete...

nice products...what about the 2005 mzda3 flare kits?

2012 mazda3 mud guards????