MAZDA People United

laser2ner · Postby **laser2ner** » November 4th, 2006, 11:48 am

hi guys in need of a manual steering rack for the old laser hatchback , any where in south would be great , this weekend would be even greater 8-)

, reasonably $$$

THanks all

TurboDrive · Postby **TurboDrive** » November 4th, 2006, 2:55 pm

AcousticEng wrote:do not put the Castrol in the VVT transmission! it will break. use the Redline ATF High temp. It covers all the grades you need.

Sorry I didnt know it was VVT.

Nik · Postby **Nik** » November 5th, 2006, 12:47 am

hummmm 1500 vvt... i'm suspecting this familia is the one that comes with the sport20 body kit an interior with 4wheel disc brakes... didnt know that u had 2 use the redline atf for those

AcousticEng · Postby **AcousticEng** » November 5th, 2006, 11:44 am

i looking for d document where redline and mazda go hand in hand. i will find it scan it and put it up. actually this Familia is the RS and the RSS with the square lite fogs kit not the sport 20 kit but its looks good too.

the RSS has the bodykit, rear disc brakes, VVT and interior.

the RS (mine) just has the VVT, interior, no body kit and sadly no rear disc brakes

<a href="http://imageshack.us"><img src="http://img262.imageshack.us/img262/457/mazda323erebuniah9.jpg" border="0" alt="Image Hosted by ImageShack.us" /></a>

but this is the transmission oil we using and it working good. but thats my opinion.

AcousticEng · Postby **AcousticEng** » November 5th, 2006, 11:47 am

laser2ner wrote:hi guys in need of a manual steering rack for the old laser hatchback , any where in south would be great , this weekend would be even greater , reasonably $$$

THanks all

donny in vistabella and dale in rio claro. i dont have a # for them though

Nik · Postby **Nik** » November 5th, 2006, 12:12 pm

kool kool yea those look real nice too... i know there are about 2 RSS with the sport20 body kit both are the same color... a kinda charcoal grey/silver... see them around an also checked out one when i wuz lookin for the sp20. the redline works for the vvt tranny while i use the atf+3 nicely

nismob12_no more · Postby **nismob12_no more** » November 5th, 2006, 7:25 pm

looking for a complete manual set-up for my BJ hatchback...shifter ,pedals ,etc

legend · Postby **legend** » November 5th, 2006, 7:45 pm

hi guys in need of a manual steering rack for the old laser hatchback , any where in south would be great , this weekend would be even greater , reasonably $$$

THanks all

there is guy in rio claro i think that has stock
ill get the number for u

AcousticEng · Postby **AcousticEng** » November 5th, 2006, 8:59 pm

yea dale. i lost his #

AcousticEng · Postby **AcousticEng** » November 5th, 2006, 9:02 pm

nismob12_no more wrote:looking for a complete manual set-up for my BJ hatchback...shifter ,pedals ,etc

hey man good you can make it. its me the guy u talked to on sat. lemme introduce d fellas :

pressneas is d guy you met with d 2000 323 with d BPT 4WD
five forward is the loudmouth guy with d magazine
computerman is d guy that came in with d sleeper 323 wagon. and well you mite meet d rest of guys in a mazdaclub meeting

mazdamig · Postby **mazdamig** » November 5th, 2006, 9:17 pm

good luck finding it nismob12_no more. Maharaj in Duncan Village had the complete manual set up from a BJ front cut but a so call "mazda man" buy it and we dont know where the gearbox gone. :?:

demented · Postby **demented** » November 6th, 2006, 12:10 am

AcousticEng wrote:
laser2ner wrote:hi guys in need of a manual steering rack for the old laser hatchback , any where in south would be great , this weekend would be even greater , reasonably $$$

THanks all

donny in vistabella and dale in rio claro. i dont have a # for them though

yuh could give some directions to donny in vistabella?

laser2ner · Postby **laser2ner** » November 6th, 2006, 7:41 am

Hey anyone came up with DALE number yet, Donny has a power steering setup complete with pump and hoses. his number is 6533832

TurboDrive · Postby **TurboDrive** » November 6th, 2006, 8:33 pm

Yeah Fellas I changed both front bearings today however I still hearing a rolling noise. Could it be the tyres ? Any thoughts on this? Alignment to be done later this week.

mazdamig · Postby **mazdamig** » November 6th, 2006, 9:23 pm

the shield on the brakes may be touching the rotor. :?:

TurboDrive · Postby **TurboDrive** » November 6th, 2006, 9:36 pm

^^^ Nah. Ah check that already. If the shields were touching I would have heard a metallic scraping kinda noise. This one could be ruled out. Anything else ?

TurboDrive · Postby **TurboDrive** » November 6th, 2006, 9:39 pm

^^^ Nah. Ah check that already. If the shields were touching I would have heard a metallic scraping kinda noise. This one could be ruled out. I hearing nore of a humming rolling kinda noise like when yuh bearings bad but I just changed these so I kinda confused. Anything else ?

katurbobeast · Postby **katurbobeast** » November 6th, 2006, 10:31 pm

ummm where'd u do the bearings?

TurboDrive · Postby **TurboDrive** » November 6th, 2006, 11:53 pm

I did it by Jurawan's in Diego Martin. Why?

katurbobeast · Postby **katurbobeast** » November 7th, 2006, 11:42 am

hahaha o firetruck....they suck at putting in bearings man.....im sure its your bearing....
i think!!

i did mine there and they did 1 shitty job, i had to do it over at bamboo machine..
i aint never going back there to press nothing.....

to check if the bearing press in badly, take of the spindle and check for play in the hub...it should have 0 play at any movement....

Tasha · Postby **Tasha** » November 7th, 2006, 8:26 pm

HOW DO I JOIN?

TurboDrive · Postby **TurboDrive** » November 7th, 2006, 9:09 pm

katurbobeast wrote:hahaha o firetruck....they suck at putting in bearings man.....im sure its your bearing....
i think!!

i did mine there and they did 1 shitty job, i had to do it over at bamboo machine..
i aint never going back there to press nothing.....

to check if the bearing press in badly, take of the spindle and check for play in the hub...it should have 0 play at any movement....

Yeah boy they have a kinda piper looking fella there doing de pressing. I'll do a check. Thanks.

TurboDrive · Postby **TurboDrive** » November 7th, 2006, 9:12 pm

Tasha wrote:HOW DO I JOIN?

Come to one of the meetings. PM AcousticEng for details.

mazdamig · Postby **mazdamig** » November 7th, 2006, 9:41 pm

Yea come to the mazda meeting and dont talk about putting a SR20 in a mazda or :snipersmile:

press naes · Postby **press naes** » November 8th, 2006, 4:54 pm

Tasha wrote:HOW DO I JOIN?

Roll wid yuh Mazda & bring plenty of yuh femme friends. Tonight could be your initiation. 8-)

Allyuh doh forget, TRen lime by Acoustic later.

Nik · Postby **Nik** » November 8th, 2006, 7:05 pm

hummmm yea i now realize i never met any of d mazda crew... time for me to fallin too

AcousticEng · Postby **AcousticEng** » November 8th, 2006, 11:35 pm

i feel so man i always wanted to meet the man who had the balls of wanted to convert his sport20 manual. I dunno why ppl like this activematic tutu. it can never feel like a true manual i dont car what any car manuafacturer say...

AcousticEng · Postby **AcousticEng** » November 8th, 2006, 11:37 pm

this sat i hear is test and tune, next sat it nite drags lets try and go ppl. and five you dissapoint me eh...

MAZTUNE · Postby **MAZTUNE** » November 8th, 2006, 11:41 pm

hello everybody i...i... is a new mazda person now... i now buy a fowl bottom... and i does lime in d BJ club doing BJs... :oops:

Nik · Postby **Nik** » November 8th, 2006, 11:46 pm

hahahaha gears is d real scene doh hav d $$$ 2 do d conversion yet hence d reason i havent contacted u as yet coustic but soon... it is a sure thing to happen
this sat hummm once der is a lime jus tell me time an i'll be there... who movin

Forums

MAZDA People United

Who is online