Moderator: 3ne2nr Mods
drivah wrote:trini iceman wrote:Anyone happen to have a working fuel pump control module for an 4g63 sohc carburetor engine? Previous owners bypassed it with a relay causing pump to to run 100%. I suspect this is the reason for overly rich mixture and performing poorly when warm.
With that in mind I will still attempt to adjust mixture on carb if possible. Any carburetor gurus can point out the mixture screw for me please? Not sure why they'd have a control module and a mixture screw but I'm no engineer. Thank you.
Also if u can tell me where the fuel pump control module is I can chk for u
Sent from my ASUS_T00J using [url='https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=639']TriniTuner.com mobile app[/url]
trini iceman wrote:drivah wrote:trini iceman wrote:Anyone happen to have a working fuel pump control module for an 4g63 sohc carburetor engine? Previous owners bypassed it with a relay causing pump to to run 100%. I suspect this is the reason for overly rich mixture and performing poorly when warm.
With that in mind I will still attempt to adjust mixture on carb if possible. Any carburetor gurus can point out the mixture screw for me please? Not sure why they'd have a control module and a mixture screw but I'm no engineer. Thank you.
Also if u can tell me where the fuel pump control module is I can chk for u
Sent from my ASUS_T00J using [url='https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=639']TriniTuner.com mobile app[/url]
Thank you. The module sits below the deck, closer to the globe box.
static wrote:Can anyone direct me to a local or online source for front camber kits. I have been looking but no luck so far.
Thanks.
Mar19 wrote:The car has a fuel delivery problem to the engine
Mike93 wrote:Fellas, I'm looking for the tensioner and bearing for the timing belt for a 4g63 single cam from a local sharkmout. Rell pressure to find. Anybody have any idea where I might be able to get it??
drivah wrote:Mike93 wrote:Fellas, I'm looking for the tensioner and bearing for the timing belt for a 4g63 single cam from a local sharkmout. Rell pressure to find. Anybody have any idea where I might be able to get it??
I have it call me 4766336
NR8 wrote:Guys can anyone tell me if the digital ac control in the Galant can be changed from the double din type (first pic) to single din type (second pic) please? Can the same wiring harness be reused, ie. just jack out from from the big control and jack into small control?
rollingstock wrote:It's a direct swap. I went from the double din touchscreen ac control to single to fit a dd deck.
rollingstock wrote:If I remember correctly the ac control is affixed to the finisher so no bracket needed. The bracket for the original deck would line up with the lower half of a double din deck, so if going single the pocket would have to go on top.
Users browsing this forum: No registered users and 7 guests