Page 1 of 1

Crank and Cam shaft Sensor

Posted: November 30th, 2013, 11:50 am
by TheOne
Hi Guys a buddy of mine has a cedia Lancer 2002 CS2 I believe. While driving the car cut off and now refuses to start. The engine tumbles but refuses to start.

A mechanic mentioned that the crank and Cam shaft sensor might be bad.

Any idea where he will be able.to source this? Any idea of what the problem could be otherwise, has anyone else experienced this with this car?

Re: Crank and Cam shaft Sensor

Posted: November 30th, 2013, 6:21 pm
by ronsin1
he should get the car scanned first before they change any sensors. however you can get these at Federal in San Fernando or Fiaz in Marabella

Re: Crank and Cam shaft Sensor

Posted: December 1st, 2013, 8:45 am
by TheOne
Thanks for the info buddy will pass on the info

Re: Crank and Cam shaft Sensor

Posted: May 24th, 2014, 1:47 pm
by kumz
Yea bess get the car scan, diagnostic scans accurate.

Re: Crank and Cam shaft Sensor

Posted: June 14th, 2014, 7:52 am
by Groundcontrol
had d same problem.Changed both sensors same problem again.It turned out to b 1 of the 4 relays in the engine bay fuse box

Re: Crank and Cam shaft Sensor

Posted: June 22nd, 2015, 6:30 pm
by ivar
did u get through with the sensors/problem?