CS3 Rear Sway Bar

[María]

Does anyone own or know of any CS3 lancer that has a rear sway bar installed?

[anthonyanthony]

The first set of cs3 did not come with rear sway bar.. I had a PBW series 2005 local and none was their.
After that other series came with them from 2006/7.. I have a PCF and it has one.
Installing one in a car that did not come with one will involve some hardware such as mounting bracket to support the sway bar which can be taken out of a crashed cs and also drilling the rear lower control / suspension arm to accomodate the sway bar links.

This sway bar did make a little difference in conering .

[María]

I made brackets and the cradle arm already has the holes for the end links but I'd like to see how your bar is fastened with the end links to the cradle arm because with mine, the end link bolts keep slackening and has actually came out completely and the bar has bent the pin.

A pic of yours would be great

[anthonyanthony]

Proton Wira 1.3/1.5 Rear Sway Bar / Rear Anti Roll Bar (type this at youtube )

http://www.youtube.com/watch?v=2MhiVIQwvhM

use the above link to see it on youtube

hope this helps since I do not have the car these days

[María]

thanks so much. will let you know if I get it sorted out.

[María]

do you happen to know the part number for the end link?

[anthonyanthony]

dont know these numbers

[Jade_Inc.]

Did you get through to install the sway bar?