trinituner.com

entire shock and spring? ill use back the ck braking system

using the cs strut for the back will make the hight of the back shorter, by a good bit

^ i saw that already but what about the front?

if it doesnt work well then evo4 for the front

the front supposed to work. evo 4-9 and ck1-cs5 should be able to bolt up. only thing might be different is the camber

sound boy 64 wrote:^ i saw that already but what about the front?

if it doesnt work well then evo4 for the front

Why not just use the shocks that are made for the CK Lancer? Why consider the CS and Evo 4?

Im looking for something a bit stiffer, currently the ride is pretty soft and easily bottoms out. so rather than replace with stock ck i was looking for something a bit better in terms of upgrade

the cs shocks can work in front

What spring would I need to use? Cs or ck. Depending on the spring then I might have to change the top mounts

we used eibach ck springs.the cs shocks are longer so if u using stock ck springs the height will increase

anyone know if the rear springs from a cs shock could work with a ck rear shock?
reason im asking a pardner has cut springs in the rear and i got a pair of cs springs laying around

Cs shock and spring would lower a ck.

Cs springs might work with a ck shock. Measure it