trinituner.com

all good and gentle people, I need some information (Part numbers & price) on a few parts for my Paj. Listed are the parts:

(1) Head Gasket (OEM)
(2) Valve Seals
(3) Piston Rings
(4) complete suspension bushing kit

Your kind assistance would be most graciously appreciated. Thanks much.

Prices you will have to search the internet or call the company. the suspension doesn;t come in a kit most times and it's a bunch of separate stuff. Also Piston rings have different type for one model vehicle engine... oly way to get the exact one is to provide an exact chassis #. Here's what I found.

(1) Head Gasket (OEM) MD365937
(2) Valve Seals MD184303

MISHI wrote:Prices you will have to search the internet or call the company. the suspension doesn;t come in a kit most times and it's a bunch of separate stuff. Also Piston rings have different type for one model vehicle engine... oly way to get the exact one is to provide an exact chassis #. Here's what I found.

(1) Head Gasket (OEM) MD365937
(2) Valve Seals MD184303

Thanks man. If I get the chassis number could you get the part number for me?

I'll do what I can

Kariba wrote:

MISHI wrote:Prices you will have to search the internet or call the company. the suspension doesn;t come in a kit most times and it's a bunch of separate stuff. Also Piston rings have different type for one model vehicle engine... oly way to get the exact one is to provide an exact chassis #. Here's what I found.

(1) Head Gasket (OEM) MD365937
(2) Valve Seals MD184303

Thanks man. If I get the chassis number could you get the part number for me?

i can get that for you. i checked it, but different numbers for different years. chassis# would match it exact

Here is some detailed information:

CHASSIS #: H77W-5204197
MODEL #: GH-H77W LRXC 5
ENGINE #: 4G94 EXT: A69F

MD365937 - GASKET,CYLINDER HEAD
MD184303 - SEAL,VALVE STEM (INTAKE and EXHAUST), RUBBER, 5.2
MD371157 (replaced old part #MD371189) - RING SET,PISTON

any specific bushings you wanna get? i can also get the super pro bushing numbers for you, and you can order them by part no. from the authorized dealer

oh, and if you gonna rebuild the block and want the numbers for the bearing and thrust washers i can post it too. seeing as the vehicle is 10 years old, it might need changing

Kronik wrote:MD365937 - GASKET,CYLINDER HEAD
MD184303 - SEAL,VALVE STEM (INTAKE and EXHAUST), RUBBER, 5.2
MD371157 (replaced old part #MD371189) - RING SET,PISTON

any specific bushings you wanna get? i can also get the super pro bushing numbers for you, and you can order them by part no. from the authorized dealer

oh, and if you gonna rebuild the block and want the numbers for the bearing and thrust washers i can post it too. seeing as the vehicle is 10 years old, it might need changing

With regards to the bushings, I was looking for a complete bushing kit; if they're not sold as a kit then I'll definitely need to specify.

Yes please, you can send the part numbers for the main & rod bearings and thrust washers.

Thanks much man.

Could you tell me the part number(s) for the OEM Brake Rotors?

BEARING,CRANKSHAFT, PLAIN, BROWN, STD 1 - 1052A437 (old # MD374761)
BEARING,CONNROD, PLAIN, BROWN, STD 1 - 1115A102 (old # MD374766 and MN155924)
THRUST BEARING SET,CRANKSHAFT, PLAIN - 1052A442 (old # MD174862)

ROTOR DISC,FR BRAKE, 16" - MR334996 (old # MR493666)
PAD SET,FR BRAKE - MR475453

there you go. i included the pads with the rotor in case

Blessed

Found a Mitsubishi Dealer in Tortola: http://www.tolasales.com/