belt burst
Posted: December 15th, 2009, 10:50 pm
drivin my sharkmouth gdi 2day drivin bout 50 n all of ah sudden both alternator n compressor belt burst, i change it n de belt and the car dont wanna start
trinituner.com
T&T's Largest Automotive Website
https://trinituner.com/v4/forums/
belt burst
https://trinituner.com/v4/forums/viewtopic.php?f=33&t=285090
Page 1 of 1
Posted: December 16th, 2009, 12:06 am
did you check the timing belt?
Posted: December 16th, 2009, 7:33 am
well i goin check it dis mornin if its not the timin belt. wat else will be the prob .... thnx 4 a lil asistance MISHI
Posted: December 16th, 2009, 8:15 am
It's a little tough to figure... is the car turning over at all? Also what happened to the car the moment the belts let go?
If a belt bursted then either it wasn't changed in a long time, had a defect, or component on the driveline has some damage that caused the belt to shred and take out the other belt in the process...
Check and see if there's any pieces of the belt wrapped around anything. Check to see if anything may have been damaged by the debris of the belts as it's not impossible it could have damaged some electrical component.
If a belt bursted then either it wasn't changed in a long time, had a defect, or component on the driveline has some damage that caused the belt to shred and take out the other belt in the process...
Check and see if there's any pieces of the belt wrapped around anything. Check to see if anything may have been damaged by the debris of the belts as it's not impossible it could have damaged some electrical component.
Posted: December 16th, 2009, 10:19 am
is the timing belt that burst
which cause a strain on the other belt causeing them to fail immediately afterwards
caused by havine a old worn out belt
happened to me once
just hope u din damage anything like your valves
which cause a strain on the other belt causeing them to fail immediately afterwards
caused by havine a old worn out belt
happened to me once
just hope u din damage anything like your valves
Posted: December 16th, 2009, 1:12 pm
timing belt dude, check the internals, might have caused some damage as you were driving.
Posted: December 16th, 2009, 2:04 pm
de timin belt was change last 6months others was change within a month....
yes mishi de car tumblin a bit but dont wanna start will let u all know de latest when i take down de cover 4 de timin ................thanks 4 de advise soo far fellas god bless !!!!!
yes mishi de car tumblin a bit but dont wanna start will let u all know de latest when i take down de cover 4 de timin ................thanks 4 de advise soo far fellas god bless !!!!!
Posted: December 16th, 2009, 2:10 pm
What brand belt did you use? The gdi has a reputation for destroying inferior brand belts 
Seriously. Use Gates or Sun.
Seriously. Use Gates or Sun.Posted: December 17th, 2009, 1:10 pm
Had a timing belt go 2 months after locksmith and the gangs changed it... and it sounds ominously like that happened. The car would turn over but it was more of a constant electrical sound rather than the more rough 'chug a chug' sound you normally get when a car is only tumbling. When the timing belt goes you don't get any compression.
Posted: December 21st, 2009, 8:51 am
four valves bend
any1 have any valves plz call me asap 466 -9076 thanx 4 de help
any1 have any valves plz call me asap 466 -9076 thanx 4 de help
Posted: December 21st, 2009, 10:18 am
better you search the classifieds for that bro.
Posted: December 21st, 2009, 1:04 pm
I Personal messaged you but for every body's benefit, the valves can be found at good Parts places, walk with your good valve. A friend of mine got hers at PT Auto. ALso her belt snapped within four months after changing timing belt. The belt tensioner was adjusted too tightly !