CK lancers Part Numbers

*KRONIK* · Postby ***KRONIK*** » November 17th, 2008, 9:11 pm

Morpheus23, kudos...... u get ag bess ride

anphillip, who tell u CK4 F4a41 doh have a filter??

quintessentiallyenigmatic, yes ur car is F4a41

venum · Postby **venum** » November 17th, 2008, 9:31 pm

SDM CK2 with F4A41 doesn't have a tranny filter as it was removed in a design upgrade by Mitsu

so soem SDM CK4 amy not have it

older JDM has it

my 99 JDM CK2 has it

Rudman's 99 SDM CK2 doesn't

is your CK4 local or roro :?:

anphillip · Postby **anphillip** » November 18th, 2008, 10:18 am

mine is local.
guys the full code for the ck2 and ck4 are as follows
f4a41-1-m8a and f4a41-1-m8a1 respectively.
the flywheels are the same size and my mech putting it in today for me. hopefully i'll be on the road 2morow.

anphillip · Postby **anphillip** » November 18th, 2008, 10:20 am

check this link
www.mivec.co.nz/tech/F4A4x_AT_Manual.pdf

Rudman · Postby **Rudman** » November 18th, 2008, 10:22 am

Correction dey venum.

The manufacture date on my CK2 is June 2000. So most of the 99 automatic CK's should have the Tranny filter. The bulletin came out Octobet 5th, 1999:

*KRONIK* · Postby ***KRONIK*** » November 18th, 2008, 7:06 pm

Applicable Models:

F4a41

f4a42

f4a51

f5a42

f5a51

SCHOLARS · Postby **SCHOLARS** » November 22nd, 2008, 5:59 pm

GREAT INFO BUMP,,,,,,,,,, THIS SHOULD BE STICKY

*KRONIK* · Postby ***KRONIK*** » November 23rd, 2008, 9:50 pm

some manual part nos now

Small clutchdisc for Ck1-2

BRAND: NKK (japan)
NW-7577

Fits:
MD 701150~5
MD 720064
MD 802060~3

Matching Small Pressure Plate/ clutch cover
BRAND: NKK (japan)
NDS-577

Fits:
MD 701205~6
MD 701025
MD 701200
MD 701275
MD701881
MD714719
MD802050~1
K511521-0

Clutch Release Bearing

BRAND: Ichiban (japan)
RCT 322SA

Fits: c62/ cb/ ck/ ck mivec

Kronik · Postby **Kronik** » November 29th, 2008, 8:56 am

CK4 local model, 4G92 SOHC

Arm Bushing, Small - MR130983 (thailand) Brand - 555

Arm Bushing, Big - MB808910 (original)

Link End Kit - MR954887 (original)

Rack End - MR130807 (japan) Brand - 555

Camshaft Oil Seal - MD372536 (original)

Crankshaft Oil Seal - MD168055 (original)

Spark Plug Seals - MD162076 (original)

Timing Belt Tensioner - MD329976

Timing Belt - 5445XS (japan) Brand - Gates

Water Pump - MD309756 (japan) Brand - Parut

Tie Rod Ends - MB52719 (japan) Brand - 555

Steering Rack Boot Rubber - MB501711 (japan)

*KRONIK* · Postby ***KRONIK*** » November 29th, 2008, 5:47 pm

wtf hoss

detail the parts better nah....

Rudman · Postby **Rudman** » December 22nd, 2008, 7:03 pm

Morpheus23 · Postby **Morpheus23** » December 23rd, 2008, 3:16 pm

Morpheus23, kudos...... u get ag bess ride

^^Everybody have their own idea of what is bess oui.

*Man was running Super gas(In a MIVEC!!)
*Pipe water in de radiator(changed to coolant diluted with distilled water immediately)
*Car cutting off or idling erratically if driven spiritedly.LoL. So so far I am not impressed.
Oh and "transmission fluid change earlier this yeah, you can change it anytime now if u want" LoL. Well boy!

A car may look and sound good. But u never know until u get it on your hands.

Laters

Morpheus23 · Postby **Morpheus23** » December 23rd, 2008, 3:17 pm

^^Oh Oh and he used to add "so much" racing fuel.LoL. My mechanic was like WTF. How much is "so much?"

*KRONIK* · Postby ***KRONIK*** » December 23rd, 2008, 3:28 pm

Morpheus23 wrote:
Morpheus23, kudos...... u get ag bess ride

^^Everybody have their own idea of what is bess oui.

*Man was running Super gas(In a MIVEC!!)
*Pipe water in de radiator(changed to coolant dilated with distilled water immediately)
*Car cutting off or idling erratically if driven spiritedly.LoL. So so far I am not impressed.
Oh and "transmission fluid change earlier this yeah, you can change it anytime now if I want" LoL. Well boy!

A car may look and sound good. But u never know until u get it on your hands.

Laters

sorry to hear about dat

yesterday
i encounterted a fire officer in tunapuna
he asking how much for my car

i say "if u like it more than me, 53K!"

he say "that eh worth no 53"

but as u can see.......... not everybody duz give dey car the TLC it needs

so i tell he "laterz"

*********screeeeeeech>>>>>Smoke........ :lol:

Morpheus23 · Postby **Morpheus23** » December 23rd, 2008, 5:53 pm

so i tell he "laterz"

*********screeeeeeech>>>>>Smoke........

^^Get used to doing that eh. LoL. Deh does be more annoying than anything

*KRONIK* · Postby ***KRONIK*** » December 23rd, 2008, 10:37 pm

yeah............... u hadda give dem more reason to hate :lol:

Rudman · Postby **Rudman** » December 31st, 2008, 8:49 am

O.K, so I have some time on my hands today (old years nah)

Some more numbers for the 4G15 DOHC:

Water pump:
GMB Water Pump - MD323372 (GWM-54A)

Timing belt tensioner (Kinda hard to find, I got mines in Federals, Cipero St.)
NTN JPU57-008A-4

*KRONIK* · Postby ***KRONIK*** » December 31st, 2008, 9:40 am

put up the nos for dem seals too

i wanna get dem ting too

Rudman · Postby **Rudman** » December 31st, 2008, 11:08 am

^I ent have those part nos. offhand..........meh mech supplied then.

*KRONIK* · Postby ***KRONIK*** » December 31st, 2008, 1:59 pm

Rudman wrote:^I ent have those part nos. offhand..........meh mech supplied then.

ohhhh

well if u do get dem.............post dem

*KRONIK* · Postby ***KRONIK*** » January 29th, 2009, 8:05 pm

4g15 DOHC Cylinder head Gasket

part no:MD331145

this gasket works for the 4g1E

*4g13EFI
4g15DOHC/*SOHC EFI
*4g18 SOHC

*still to be Verified

see pics for the gasket

anothe thing i just wanted to post was the intake and exhaust manifold gasket

INTAKE @ top

EXHAUST @ bottom

the TENSIONER for the timing belt as posted by RUDMAN was RE-verified by de I interms of correct size and bolt up but my part no kinda different

BRAND: NTN
NO: JPU57-54+JF598

and looks like this

finally the one item which eluded me....

plug seals

one is a ring (2 in the centre)and the other has a attachment for a screw (2 outer)

wen i get the correct seals i'll update

Morpheus23 · Postby **Morpheus23** » February 26th, 2009, 2:36 pm

How come this ain't a Sticky? :twisted:

Ketch meh tail to find it back.

Anyony have the part numbers for 2nd gen 4G92 MIVEC PS/AC belt???

BUMP :twisted:

Morpheus23 · Postby **Morpheus23** » February 26th, 2009, 3:05 pm

^^Ok I managed to decipher the print on the old belt.

It's 5PK1330. This was verified by a Google search as well:D

KO customs · Postby **KO customs** » February 27th, 2009, 11:40 am

Sweet!!!!!!
nice forum.

*KRONIK* · Postby ***KRONIK*** » February 27th, 2009, 4:44 pm

more part nos coming soon

Kronik · Postby **Kronik** » February 28th, 2009, 11:58 pm

*KRONIK* wrote:more part nos coming soon

x2

Morpheus23 · Postby **Morpheus23** » March 1st, 2009, 12:32 am

4G92 1.6 MIVEC

Injectors: Bosch CDH275 *verified

Fuel pressure Regulator: Denso 195300-2760 *verified

Coil Packs: MD325053 (2) *verified

BUMP

Kronik · Postby **Kronik** » March 1st, 2009, 8:48 pm

Morpheus23 wrote:4G92 1.6 MIVEC

Injectors: Bosch CDH275 *verified

Fuel pressure Regulator: Denso 195300-2760 *verified

Coil Packs: MD325053 (2) *verified

BUMP

also the Spark plug cables to go with the coil packs for the other 2 spark plugs is MD334517