TriniTuner.com  |  Latest Event:  

Forums

THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Mitsu Lancer, Evo, GSR, MIVEC, 4G**, GDI, Galant, Outlander, L200 Sportero/Triton etc.

Moderator: 3ne2nr Mods

User avatar
Spitfir3
punchin NOS
Posts: 3654
Joined: September 1st, 2009, 11:11 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby Spitfir3 » May 22nd, 2016, 7:56 pm

anyone know where the horn relay for the ck lancer is?

the horn would just randomly go off without me even pressing anything i already checked the steering and nothing seems to be stuck so im assuming its the relay but i ain't got a clue to where it is

right now i got the fuse disconnected as a temp

looking at the diagram on the fuse box there is nothing in place where the horn symbol is

trini iceman
Trinituner Peong
Posts: 461
Joined: January 12th, 2013, 1:14 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby trini iceman » May 22nd, 2016, 8:09 pm

Horn relays are usually in the engine bay box. Whatsapp 3981404 for help

User avatar
Jade_Inc.
3NE2NR is my LIFE
Posts: 702
Joined: February 18th, 2010, 7:18 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby Jade_Inc. » May 25th, 2016, 4:37 pm

Hey guys, I'm gonna change transmission oil tomorrow, it's a cvt for the 4g18.
How much oil does it normally uses? I'm not flushing the transmission.
Also, Could I use the Mitsubishi SP III oil for the power steering oil?

User avatar
cypher
Street 2NR
Posts: 52
Joined: September 9th, 2013, 10:55 am

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby cypher » June 25th, 2016, 6:08 am

Gd day all,i am having an issue with my tran, on a 4g15 engine,keeps skipping between 2 and 3 wen its shifting (automatic) changed tran oil an dat fixed prob for 1 week then it started back.....any ideas???

User avatar
cypher
Street 2NR
Posts: 52
Joined: September 9th, 2013, 10:55 am

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby cypher » June 25th, 2016, 6:09 am

Gd day all,i am having an issue with my tran, on a 4g15 engine,keeps skipping between 2 and 3 wen its shifting (automatic) changed tran oil an dat fixed prob for 1 week then it started back.....any ideas???

Jahsoncc
Riding on 13's
Posts: 1
Joined: June 26th, 2016, 12:42 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby Jahsoncc » June 26th, 2016, 12:51 pm

Hi new to tuner and new to the car stuff I have a libero pbb and I want suggestions on how to do over my entire suspension, and to have a best suspension that can take d jamming. Any help is appreciated

figleaf
Ricer
Posts: 17
Joined: June 19th, 2016, 9:17 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby figleaf » July 13th, 2016, 1:34 am

Tuners good day

I did a swap to 4g93t (GDI) on a CS3 lancer. As a result I need some advice on suspension upgrades.
So far I changed control arm and steering rack bushings to Whiteline polyurethane.
Since the swap however there’s been a constant crackle upon pulling off, applying brakes from high or low speeds, turning and as soon as the front wheels start going over humps/bumps.
From this, anyone had similar symptoms or can possibly offer a solution?
Even recommend a sane, knowledgeable suspension person?

AH FED UP of the different possible fixes from my recently knighted jack@$$ of an all rounded mechanic…I need to get the issue rectified urgently.

User avatar
rollingstock
TriniTuner 24-7
Posts: 17900
Joined: June 29th, 2009, 8:21 am
Location: Ain't got no chill!

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby rollingstock » July 13th, 2016, 6:04 am

Check your subframe bushings.

figleaf
Ricer
Posts: 17
Joined: June 19th, 2016, 9:17 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby figleaf » July 14th, 2016, 4:17 am

@rollingstock
Appreciate the advice man. will do. thanks

User avatar
Jade_Inc.
3NE2NR is my LIFE
Posts: 702
Joined: February 18th, 2010, 7:18 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby Jade_Inc. » July 20th, 2016, 9:33 am

hey,
A few days now, I'm driving and my temperature just keeps going up once im in traffic. I checked the fans and they are working. This morning I started the car and put on the AC, The both fans came on and after the temperature reached half, they cut off. Are they supposed to stop or does it have to keep on working once the AC is on? CS3 4G18

User avatar
cypher
Street 2NR
Posts: 52
Joined: September 9th, 2013, 10:55 am

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby cypher » July 22nd, 2016, 9:36 am

Gd day all,i am having an issue with my tran, on a 4g15 engine,keeps skipping between 2 and 3 wen its shifting (automatic) changed tran oil an dat fixed prob for 1 week then it started back.....any ideas???

User avatar
huud
Ricer
Posts: 22
Joined: January 24th, 2014, 10:48 pm
Contact:

Ck4 lancer hold back issued

Postby huud » December 18th, 2016, 11:20 am

Hello
I got a ck4 lancer - nice car
But I'm having some problems that's bothering me

1. I feel like the car has a hold back. Reason I say this cause from the time I move my foot off of gas the car starts to slow like I'm hitting brakes!!

2. When I cross about 60kmph I get a vibration and humming sound from the wheels - I think

OK so can anyone please assist with diagnosing thesen2 problems here

User avatar
rollingstock
TriniTuner 24-7
Posts: 17900
Joined: June 29th, 2009, 8:21 am
Location: Ain't got no chill!

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby rollingstock » December 18th, 2016, 3:36 pm

Check brake calipers, pin may be stuck.
When last you serviced them?

User avatar
huud
Ricer
Posts: 22
Joined: January 24th, 2014, 10:48 pm
Contact:

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby huud » December 25th, 2016, 1:34 am

Cant remember, also when i right turn I get this tick tick tick sound coming from the wheel

figleaf
Ricer
Posts: 17
Joined: June 19th, 2016, 9:17 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby figleaf » January 8th, 2017, 2:10 pm

Need some advice tuners...so on my CS2A I have had the same seats I bought it with since 2011. They're DEAD now and I wanna change them. So far real people said to use the CS5W seats but just as a point of inquiry...can any EVO model seats be used?

User avatar
Morpheus
TriniTuner 24-7
Posts: 10729
Joined: July 22nd, 2004, 2:24 am

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby Morpheus » January 8th, 2017, 4:40 pm

Evo 7 - 9 should bolt up.

figleaf
Ricer
Posts: 17
Joined: June 19th, 2016, 9:17 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby figleaf » January 8th, 2017, 4:56 pm

nice thanks man @Morpheus

User avatar
tubz20
Street 2NR
Posts: 79
Joined: April 16th, 2010, 8:12 pm
Location: all over
Contact:

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby tubz20 » January 8th, 2017, 5:15 pm

Looking for a decent electrician to run thru a ck lancer I recently bought. Has some issues I'd like addressed. Located pos. Pm me those who interested

trini iceman
Trinituner Peong
Posts: 461
Joined: January 12th, 2013, 1:14 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby trini iceman » January 9th, 2017, 8:55 am

tubz20 wrote:Looking for a decent electrician to run thru a ck lancer I recently bought. Has some issues I'd like addressed. Located pos. Pm me those who interested


You may contact us @ 3981404 WhatsApp if you can, thank you.

platinumworm2
Riding on 13's
Posts: 12
Joined: September 14th, 2016, 2:53 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby platinumworm2 » February 6th, 2017, 8:33 pm

Any problems with your mitsubishi GDI fuel pump call this fella he will sort u out try it before spending all tha money buyin a new pump. 7468222

figleaf
Ricer
Posts: 17
Joined: June 19th, 2016, 9:17 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby figleaf » February 15th, 2017, 5:42 pm

quick question folks...My CS2A lancer shocks are currently dead (all 4...RIP). I also did the 4G93T conversion and was wondering what would be the best alternative to just replacing with KYB shocks. As in coilovers etc, which brands etc or any other higher end Mitsubishi vehicle shocks that bolts up and are an upgrade compared to the KYBs.

BoostJunkieXL
Sweet on this forum
Posts: 336
Joined: August 31st, 2008, 9:39 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby BoostJunkieXL » March 7th, 2017, 8:42 am

figleaf wrote:quick question folks...My CS2A lancer shocks are currently dead (all 4...RIP). I also did the 4G93T conversion and was wondering what would be the best alternative to just replacing with KYB shocks. As in coilovers etc, which brands etc or any other higher end Mitsubishi vehicle shocks that bolts up and are an upgrade compared to the KYBs.


depends on what your prefrence is. i run tanabe sustec pro ccoilovers with a 4g69 engine because it corners very well and i can apply raw power for straight pulls. my buddys mom's lancer wagon with a 4g93t is running on teins and she gets a very smoothe comfortable ride with not so much of the performance aspect. then another buddy of mine has megan coilovers on his cs2 with a 4g93t and he gets a bit of both worlds i.e handling and comfort. personally i want a set of cusco because they perform really well in a performance aspect and they ride almost as smoothe as teins. you can also get a good set of tokico shocks with some tein, rsr or espelir drop springs if you just want the look with some comfort.

User avatar
huud
Ricer
Posts: 22
Joined: January 24th, 2014, 10:48 pm
Contact:

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby huud » March 11th, 2017, 11:45 pm

Hey hook me up with the mitsubishi specialist #3790055 or message

User avatar
huud
Ricer
Posts: 22
Joined: January 24th, 2014, 10:48 pm
Contact:

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby huud » March 23rd, 2017, 12:32 am

Hello,
I have a ck4 lancer 4g92 dohc. When am accelerating I feel stuttering, like the car is kicking me. As soon as I release X i feeling a hold back. Can anyone tell me what is this and how it can be repaired. Thanks

trini iceman
Trinituner Peong
Posts: 461
Joined: January 12th, 2013, 1:14 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby trini iceman » March 23rd, 2017, 2:23 am

Sounds like misfire. Won't know the type till I test.

figleaf
Ricer
Posts: 17
Joined: June 19th, 2016, 9:17 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby figleaf » May 5th, 2017, 12:52 pm

is there anywhere other than diamond motors i can acquire brand new cv axle assemblies complete for my lancer? or someone who builds/rebuilds them?

User avatar
Ted_v2
TriniTuner 24-7
Posts: 11399
Joined: March 30th, 2010, 8:58 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby Ted_v2 » May 6th, 2017, 7:13 am

Constant velocity in sando

badseedz
Riding on 13's
Posts: 4
Joined: December 12th, 2016, 6:02 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby badseedz » May 27th, 2017, 11:16 pm

can anyone direct me to someone with a local 4g92 ecu MR507191? if so, you can contact me asap 3584622. need to be tested before purchase.

badseedz
Riding on 13's
Posts: 4
Joined: December 12th, 2016, 6:02 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby badseedz » May 27th, 2017, 11:26 pm

good day. im looking for an ecu MR507191.. anyone that has one can contact me asap plz. 3584622. whatsapp 4990116. must be tested on a car you trust before purchase. what does it mean when your ecu isnt giving spark to the plugs? pretty sure that means it going thru. and can it be fixed?

figleaf
Ricer
Posts: 17
Joined: June 19th, 2016, 9:17 pm

Re: THE OFFICIAL MITSUBISHI Q & A THREAD (NO BUY OR SELL POSTS!)

Postby figleaf » October 21st, 2017, 2:39 pm

good day tuners. Anyone knows if Evo 7/8 steering racks can be used on CS2A lancers?

Advertisement

Return to “MITSUBISHI”

Who is online

Users browsing this forum: No registered users and 5 guests