The Official CS Lancer Thread!

[BrotherHood]

@ dougla_smurf?

Tiptronic CS3 yes. How that car does perform boy?

[daniel135]

Trinidad Hose in cross-crossing sando might have that.

Here's d pix of tip-tronic.

ImageUploadedByTriniTuner1395320125.663777.jpg

ImageUploadedByTriniTuner1395320161.755518.jpg

ImageUploadedByTriniTuner1395320195.391951.jpg

ImageUploadedByTriniTuner1395320240.372525.jpg

I wanna get a run with this a see how d tiptronic pulls

[de_dougla_smurf]

:shock: @ dougla_smurf?

Tiptronic CS3 yes. How that car does perform boy?

Everything in there is oem. It works pretty well, especially when overtaking power is needed. Sounds really good without the sound dampening on the intake. It walks all over its cvt counterparts. I guess with a little investment, it can satisfy but remember, its still an sohc economy engine.

The transmission is very similar to the one in my shark but has closer ratios for obvious reasons. This is my only qualm with it.

At 100km/h the engine revs are at 3000rpm in 4th. I would loved a 5th or overdrive for a higher top end and/or better highway economy.

[idlemind]

Only 4fwd?

Mitsubishi r&d real weird boy...

[de_dougla_smurf]

Thats right.

That being said, the tiptronic shines in the rural hilly areas on the beach runs having more control of the cars output. The economy is great too.

[idlemind]

Yea its meant for low-end torque.
Your cruising gear is 4th so dont expect much from it, 3rd gear must feel real aggressive.

[thatguy3832]

The one I saw came from the firm with the CY instrument panel and it was a 6 speed tiptronic will take pics next time I see it not a 4wd btw CS3 had to check the chassis to make sure it was

[Ted_v2]

anyone ever had to buy front spindles foreign used for their car?
how much is a fair price?

i wanna get a set of cs2 calipers and rotors(4x100), seeing them for 1k local used.

[TeamH2O]

i sold my front set for 1500 with cross drilled rotors.....so i would say 800 a pair 1000 max

[daniel135]

anyone ever had to buy front spindles foreign used for their car?
how much is a fair price?

i wanna get a set of cs2 calipers and rotors(4x100), seeing them for 1k local used.

You gettin d bigger brakes for 1200 for d pair

[Ted_v2]

Na it won't work Unless those bigger brakes are 4x100.

I know the bigger brakes are 5 hole.

[daniel135]

Na it won't work Unless those bigger brakes are 4x100.

I know the bigger brakes are 5 hole.

I have on d bigger brakes on mine. They r 4*114. They r also available in 4*100. I can show you where to get them. Bigger difference from stock.just make sure u running 15inch rims or bigger cuz it cant work wit d stock 14's

[Ted_v2]

It's for a ck.
The stock cs2 brakes are a 1" upgrade to the stock ck brakes.
Right now I'm using stock 14" wheels.
I'll send you a Pm later to check and see if i can get those bigger brakes. The stock cs are fine for me because it might put a strain on my braking system if i use anything bigger

My car is non abs also.

[daniel135]

or ok.no probs man. You can never have to much brakes!!

[msb]

I need to change the spark plugs on a 4G15 GDI engine. Anyone know the required gap spacing required?

[djruncrowd]

anyone ever had to buy front spindles foreign used for their car?
how much is a fair price?

i wanna get a set of cs2 calipers and rotors(4x100), seeing them for 1k local used.

Sb64, I did a while back for my cs2 , got a, f.u. Set , I had to buy the entire assembly though rotor, caliper, spindle paid $400. Per side , it had a nice set of akebono brake pads in them too .

[sonygoup]

Guys I post in the wrong forum

[amrit90901]

Anybody interested in coilovers ?

[JUS4SHO]

^^^
Not they are a waste off time

[idlemind]

lol waste of time for who?
Not if you used it for its intended purpose..

[BrotherHood]

This is a first...

I thought coilovers was the best because it can be adjusted/twerked to suit you.

[JUS4SHO]

Lol I posted that because this is the wrong forum for an EOI or FS

ImageUploadedByTriniTuner1395774204.452585.jpg (16.89 KiB) Viewed 4815 times

Remember I have the street flex and edfc on my GT

[fras]

anyone ever thought/try putting evo3 (4X114 double piston) brakes on their cs?

[amrit90901]

It would work, the vr4 double piston, evo 4and up stock double piston will work on the cs that carries the 11 inch front rotors

[ZeroOne]

Whats the spark plug gap for the GDI?

Im seeing the BKR5E-11 with 1.1mm gap being sold locally and the BKR5E 0.9mm gap is hard to find locally.

[wagonrunner]

car sometimes starts with CEL which goes out after a while.

once it was parked. would start and cut off. unplugging sensor on throttle body and plugging back in car started and worked well for a week or so.

car felt sluggish, idle ridiculously low, got home and then cut off. unplugging and plugging back in throttle body sensor car started with no CEL, and seems to be working.

Has anyone ever experienced same with that sensor's jack getting slack, after rolling through rough terrain causing similar issues?

[nissan4life]

wagonrunner this happened to me once where cel came on and car jerked and was idling like sheit,car went in limp mode and was very slow.
A clean in my maf sensor and a restart had to be done in order to fix whateva error the ecu picked up.
Depending on which engine you hav you could look at cleaning your maf or map sensor before looking at Throttle sensor.

[TeamH2O]

Anyone got an old pair of cs lancer shocks/springs to give away? Or big spring shock?(Need one only as I have one, also need the cover/mount)......Need to have my project rolling now.

[QG]

Anyone got an old pair of cs lancer shocks/springs to give away? Or big spring shock?(Need one only as I have one, also need the cover/mount)......Need to have my project rolling now.

I suppose to...will get back to you by Tuesday.

[TeamH2O]

besss