Moderator: 3ne2nr Mods
The 3zz and 1zz are not compatible electronically wise. Will need to rewirecueball1990 wrote:Nightshield wrote:Trying to locate a cost for an engine and transmission the complete set for a Toyota Corolla NZE 3ZZ Engine please. Thanks.
the 3zz engine and tranny is expensive (transmission alone is like 7000) . if you cant find it the 1zz engine and transmission will fit with no modifications so its an option you can consider because its much cheaper
c_r_s wrote:looking to do an engine change in my nze 121...gearing towards the 1nzfe engine and transmission...wanted to confirm if this engine is available in these foreign used places and if it will need rewiring and can a costing be provided for the complete conversion as well...car currently has the 3zzfe engine and transmission
Alluh hadda stop checking bamboo alone and check penal. A few months ago I check, 3500 for a transmission, and I buy a head and block for 3000 a couple years ago, I get quoted 6-7k in bamboo for it. I have some numbers for a couple of the places in penal you could call and find out if you wantJayyXXII wrote:c_r_s wrote:looking to do an engine change in my nze 121...gearing towards the 1nzfe engine and transmission...wanted to confirm if this engine is available in these foreign used places and if it will need rewiring and can a costing be provided for the complete conversion as well...car currently has the 3zzfe engine and transmission
I’ve never checked for the engine for the 1NZ-FE, but the transmission(8 pin with speed sensor) costs $7000 (bamboo price) and that’s on the rare occasion that they actually have it in stock.
This comes with the local 1.5 Corolla considered the Singapore model.
You can call a couple places to find out the pricing and availability yourself to better determine what’s best for you.
Hope this helps.
Kronik wrote:Alluh hadda stop checking bamboo alone and check penal. A few months ago I check, 3500 for a transmission, and I buy a head and block for 3000 a couple years ago, I get quoted 6-7k in bamboo for it. I have some numbers for a couple of the places in penal you could call and find out if you wantJayyXXII wrote:c_r_s wrote:looking to do an engine change in my nze 121...gearing towards the 1nzfe engine and transmission...wanted to confirm if this engine is available in these foreign used places and if it will need rewiring and can a costing be provided for the complete conversion as well...car currently has the 3zzfe engine and transmission
I’ve never checked for the engine for the 1NZ-FE, but the transmission(8 pin with speed sensor) costs $7000 (bamboo price) and that’s on the rare occasion that they actually have it in stock.
This comes with the local 1.5 Corolla considered the Singapore model.
You can call a couple places to find out the pricing and availability yourself to better determine what’s best for you.
Hope this helps.
Hi im not sure if you still on tuner but i have a nze124 wagon and i need front wheel bearings plus the arms for the ball joint.AUTO TAG wrote:FOR ALL YOUR GENUINE TOYOTA AND LEXUS PARTS CALL 358-9754
CANT GO WRONG..................
EVERYTHING ALL MAKES AND MODELS
crystalE wrote:Hi im not sure if you still on tuner but i have a nze124 wagon and i need front wheel bearings plus the arms for the ball joint.AUTO TAG wrote:FOR ALL YOUR GENUINE TOYOTA AND LEXUS PARTS CALL 358-9754
CANT GO WRONG..................
EVERYTHING ALL MAKES AND MODELS
Thanks for the speedy replyADONI wrote:crystalE wrote:Hi im not sure if you still on tuner but i have a nze124 wagon and i need front wheel bearings plus the arms for the ball joint.AUTO TAG wrote:FOR ALL YOUR GENUINE TOYOTA AND LEXUS PARTS CALL 358-9754
CANT GO WRONG..................
EVERYTHING ALL MAKES AND MODELS
If you don't get thru with Auto Tag.
You can go by United bearings and get SKF or Koyo bearings.
Cradle Arms, there was a PS here Sanchris (3749463) who had Toyota replacement bushings.
ANIS wrote:Good day guys if the ps light is on and the car works fine what can I do the diagnostic shows nothing is wrong with the car it's a 2002 nze with Eps ?
Did you clean the idle air controller?, It's the sensor located on the bottom of the throttle bodydtopshottas wrote:Good day Tuners
Getting a rough idle when the engine is cold on a '06 Corolla 1.5 electronic TB. Changed out all the plugs, clean MAF sensor, cleanen TB, changed PCV and no codes but still no luck. Anyone with a fix just throw it my way.
Kronik wrote:Did you clean the idle air controller?, It's the sensor located on the bottom of the throttle bodydtopshottas wrote:Good day Tuners
Getting a rough idle when the engine is cold on a '06 Corolla 1.5 electronic TB. Changed out all the plugs, clean MAF sensor, cleanen TB, changed PCV and no codes but still no luck. Anyone with a fix just throw it my way.
Check your engine mounts, lower ones could be deadMarvinC wrote:My car 2001 Toyota corolla nze engine is vibrating when i put it in any gear and it starts to vibrate more when i put the a/c on. What to do????
dtopshottas wrote:Good day Tuners
Getting a rough idle when the engine is cold on a '06 Corolla 1.5 electronic TB. Changed out all the plugs, clean MAF sensor, cleanen TB, changed PCV and no codes but still no luck. Anyone with a fix just throw it my way.
LincolnB wrote:dtopshottas wrote:Good day Tuners
Getting a rough idle when the engine is cold on a '06 Corolla 1.5 electronic TB. Changed out all the plugs, clean MAF sensor, cleanen TB, changed PCV and no codes but still no luck. Anyone with a fix just throw it my way.
Where did you get the PCV valve?
ryandtrini wrote:What engine comes in the 2015/2016 corolla?
Users browsing this forum: No registered users and 8 guests