TriniTuner.com  |  Latest Event:  

Forums

The NZE Corolla Thread

It's all about 4AGE, NZE, 3SGTE, 1JZ, 2JZ etc.

Moderator: 3ne2nr Mods

User avatar
Hibrydsoul
Sweet on this forum
Posts: 277
Joined: August 23rd, 2009, 8:13 am
Location: Pushing the limit.

Re: The NZE Corolla Thread

Postby Hibrydsoul » October 21st, 2014, 7:48 pm

Not all because in both my tercel and b14, when the compressor clicks off the fans switch off unless the thermostat signals otherwise, hence why I'm asking.

CA6230
Ricer
Posts: 27
Joined: October 20th, 2009, 1:12 pm
Location: Trinidad

Re: The NZE Corolla Thread

Postby CA6230 » October 26th, 2014, 10:53 am

Anyone have the rear disc conversion for the 2003 fielder?

User avatar
Hibrydsoul
Sweet on this forum
Posts: 277
Joined: August 23rd, 2009, 8:13 am
Location: Pushing the limit.

Re: The NZE Corolla Thread

Postby Hibrydsoul » November 2nd, 2014, 6:18 pm

So I've figured out why my fan was staying on when the a/c was on, its simply because my coolant levels were low so the temp sensor kept it on and the garage used substitute coolant and not the original Toyota brand coolant. So I bought a gallon of Toyota coolant and changed my coolant and now it cuts off and on as it should.

cane
Riding on 13's
Posts: 1
Joined: November 5th, 2014, 12:36 pm

Re: The NZE Corolla Thread

Postby cane » November 5th, 2014, 1:01 pm

Anyone knows how to reset the ecu in a 2007 fielder

User avatar
singh is king
Street 2NR
Posts: 59
Joined: January 12th, 2010, 7:36 pm

Re: The NZE Corolla Thread

Postby singh is king » November 6th, 2014, 2:14 pm

Hey guys I have an 2007 local nze and all of a sudden it starts to make a loud squeaking sound at the back when ever u sit and get up there is this loud noise. I have checked the rubbers and shocks and springs and all is good but can't seem to find the issue. Any suggestion guys this will be greatly appreciated.

User avatar
vtec-ghost
3NE 2NR for life
Posts: 222
Joined: June 7th, 2011, 10:29 am

Re: The NZE Corolla Thread

Postby vtec-ghost » November 6th, 2014, 10:39 pm

any advise on an alternative oil filter than the OEM toyota for the 3zz-fe engine. I am staying clear of fram. Is the puralator pure one good????

User avatar
Big Z
30 pounds of Boost
Posts: 2501
Joined: August 11th, 2004, 9:58 pm
Location: 734-7669 Amsoil, Chevron, Redline, Fuel Injector Cleaning
Contact:

Re: The NZE Corolla Thread

Postby Big Z » November 6th, 2014, 11:13 pm

vtec-ghost wrote:any advise on an alternative oil filter than the OEM toyota for the 3zz-fe engine. I am staying clear of fram. Is the puralator pure one good????

Purolator Pure One is good, Royal Purple is best. Yes.. in a comparison of two items the superlative term would be "better".
However, Royal Purple oil filters are the best among all oil filters, in practically everything that matters.

User avatar
Big Z
30 pounds of Boost
Posts: 2501
Joined: August 11th, 2004, 9:58 pm
Location: 734-7669 Amsoil, Chevron, Redline, Fuel Injector Cleaning
Contact:

Re: The NZE Corolla Thread

Postby Big Z » November 6th, 2014, 11:16 pm

Hibrydsoul wrote:So I've figured out why my fan was staying on when the a/c was on, its simply because my coolant levels were low so the temp sensor kept it on and the garage used substitute coolant and not the original Toyota brand coolant. So I bought a gallon of Toyota coolant and changed my coolant and now it cuts off and on as it should.

Amsoil Coolant and Amsoil Coolant Boost. My fans stay on for about 15 to 20 seconds when idling.

User avatar
toyota2nr
18 pounds of Boost
Posts: 2467
Joined: July 21st, 2006, 3:05 pm

Re: The NZE Corolla Thread

Postby toyota2nr » November 8th, 2014, 3:36 pm

Hey guys need some help. can any of these work on the NZE121? I know it's 1NZ-FE but I wanna make sure.

http://www.ebay.com/itm/MISHIMOTO-Perfo ... 90&vxp=mtr

http://www.ebay.com/itm/TOYOTA-SCION-XB ... 94&vxp=mtr

http://www.ebay.com/itm/TOYOTA-SCION-XB ... cf&vxp=mtr

I wanna change my radiator and am looking at any of these if possible.

User avatar
Big Z
30 pounds of Boost
Posts: 2501
Joined: August 11th, 2004, 9:58 pm
Location: 734-7669 Amsoil, Chevron, Redline, Fuel Injector Cleaning
Contact:

Re: The NZE Corolla Thread

Postby Big Z » November 8th, 2014, 6:42 pm

toyota2nr wrote:Hey guys need some help. can any of these work on the NZE121? I know it's 1NZ-FE but I wanna make sure.

http://www.ebay.com/itm/MISHIMOTO-Perfo ... 90&vxp=mtr

http://www.ebay.com/itm/TOYOTA-SCION-XB ... 94&vxp=mtr

http://www.ebay.com/itm/TOYOTA-SCION-XB ... cf&vxp=mtr

I wanna change my radiator and am looking at any of these if possible.

If the images listed there are correct, those will not work. Why don't you look for Corolla radiators?

chocolate323
Riding on 13's
Posts: 3
Joined: March 15th, 2013, 11:05 pm

Re: The NZE Corolla Thread

Postby chocolate323 » November 15th, 2014, 6:21 pm

hey someone told me i can repair my power steering rack ,,i have a electrical rack and i'm getting a play and i don't have the cash for a new one right now ,,soo can it be repaired ????????????? thanks

User avatar
Hibrydsoul
Sweet on this forum
Posts: 277
Joined: August 23rd, 2009, 8:13 am
Location: Pushing the limit.

Re: The NZE Corolla Thread

Postby Hibrydsoul » November 17th, 2014, 11:19 am

Big Z wrote:
Hibrydsoul wrote:So I've figured out why my fan was staying on when the a/c was on, its simply because my coolant levels were low so the temp sensor kept it on and the garage used substitute coolant and not the original Toyota brand coolant. So I bought a gallon of Toyota coolant and changed my coolant and now it cuts off and on as it should.

Amsoil Coolant and Amsoil Coolant Boost. My fans stay on for about 15 to 20 seconds when idling.


BigZ where can I source this? I bought original Toyota coolant, the fans still stays on when the sun is especially hot, but switches off when the day is cool. I'm thinking because I didn't get all that substitute coolant out the head or my thermostat going bad. So I'm fixing to do another coolant flush soon.
Last edited by Hibrydsoul on November 17th, 2014, 11:53 am, edited 2 times in total.

User avatar
Hibrydsoul
Sweet on this forum
Posts: 277
Joined: August 23rd, 2009, 8:13 am
Location: Pushing the limit.

Re: The NZE Corolla Thread

Postby Hibrydsoul » November 17th, 2014, 11:26 am

Big Z wrote:
vtec-ghost wrote:any advise on an alternative oil filter than the OEM toyota for the 3zz-fe engine. I am staying clear of fram. Is the puralator pure one good????

Purolator Pure One is good, Royal Purple is best. Yes.. in a comparison of two items the superlative term would be "better".
However, Royal Purple oil filters are the best among all oil filters, in practically everything that matters.


I use K&N oil filters.its about ah hundred for one but If you studying price, Bosch is okay to use.

User avatar
Big Z
30 pounds of Boost
Posts: 2501
Joined: August 11th, 2004, 9:58 pm
Location: 734-7669 Amsoil, Chevron, Redline, Fuel Injector Cleaning
Contact:

Re: The NZE Corolla Thread

Postby Big Z » November 17th, 2014, 5:03 pm

Hibrydsoul wrote:I use K&N oil filters.its about ah hundred for one but If you studying price, Bosch is okay to use.

If the $25 Purolator and the $100 K&N oil filters were the same price, I would use the Purolator.
This, according to some old test data which I had come across on the innernet quite a while aback.
Don't expect this to have changed much.

User avatar
Big Z
30 pounds of Boost
Posts: 2501
Joined: August 11th, 2004, 9:58 pm
Location: 734-7669 Amsoil, Chevron, Redline, Fuel Injector Cleaning
Contact:

Re: The NZE Corolla Thread

Postby Big Z » November 17th, 2014, 5:10 pm

Hibrydsoul wrote:I bought original Toyota coolant, the fans still stays on when the sun is especially hot, but switches off when the day is cool. I'm thinking because I didn't get all that substitute coolant out the head or my thermostat going bad. So I'm fixing to do another coolant flush soon.

Don't rush to change the coolant just yet. Check your coolant level and replace your radiator cap if this has never been done done in recent memory. Check your top and bottom rad hoses to ensure that they are both hot.. ergo, you have coolant flow.
Another neat trick is to remove about one liter of coolant and replace with water. Please... no WASA water. Bottled water should be fine.
If you think WASA water was in your system, my condolences. You can try a radiator flush.

User avatar
Big Z
30 pounds of Boost
Posts: 2501
Joined: August 11th, 2004, 9:58 pm
Location: 734-7669 Amsoil, Chevron, Redline, Fuel Injector Cleaning
Contact:

Re: The NZE Corolla Thread

Postby Big Z » November 17th, 2014, 5:18 pm


User avatar
Hibrydsoul
Sweet on this forum
Posts: 277
Joined: August 23rd, 2009, 8:13 am
Location: Pushing the limit.

Re: The NZE Corolla Thread

Postby Hibrydsoul » November 24th, 2014, 6:30 am

How can you tell when the temp sensor is going bad? In my case when I switch on the a/c and switch it off almost immediately the fan stays on for about 30secs on a cold engine and about 90secs when engine is hot. Has anyone experienced that? And where is the temp sensor? Is it placed on the chassis in the front on the passenger side?

User avatar
eel7
Sweet on this forum
Posts: 317
Joined: June 9th, 2009, 7:00 pm
Location: san juan
Contact:

Re: The NZE Corolla Thread

Postby eel7 » November 26th, 2014, 1:16 pm

If anyone needs a 1nz fe brain box I have one for sale.

User avatar
singh is king
Street 2NR
Posts: 59
Joined: January 12th, 2010, 7:36 pm

Re: The NZE Corolla Thread

Postby singh is king » November 29th, 2014, 8:24 pm

hey guys do you all know where i can get the light socket for the rear light top section of a nze 2001 corolla also any one have the eyelids to sell?????

User avatar
konartis
Shifting into 6th
Posts: 2119
Joined: January 11th, 2011, 11:22 am
Location: south

Re: The NZE Corolla Thread

Postby konartis » November 29th, 2014, 11:18 pm

singh is king wrote:hey guys do you all know where i can get the light socket for the rear light top section of a nze 2001 corolla also any one have the eyelids to sell?????

dont think the sockets are avaliable...the eye lids are hard to get....im looking also

User avatar
singh is king
Street 2NR
Posts: 59
Joined: January 12th, 2010, 7:36 pm

Re: The NZE Corolla Thread

Postby singh is king » November 30th, 2014, 12:20 am

konartis wrote:
singh is king wrote:hey guys do you all know where i can get the light socket for the rear light top section of a nze 2001 corolla also any one have the eyelids to sell?????

dont think the sockets are avaliable...the eye lids are hard to get....im looking also



Thanks bro will keep looking bound to show up one day

User avatar
konartis
Shifting into 6th
Posts: 2119
Joined: January 11th, 2011, 11:22 am
Location: south

Re: The NZE Corolla Thread

Postby konartis » November 30th, 2014, 10:12 am

singh is king wrote:
konartis wrote:
singh is king wrote:hey guys do you all know where i can get the light socket for the rear light top section of a nze 2001 corolla also any one have the eyelids to sell?????

dont think the sockets are avaliable...the eye lids are hard to get....im looking also



Thanks bro will keep looking bound to show up one day

if u get tru, be sure to post back...was thinking if those abs plastic can work to make the eye lids

User avatar
singh is king
Street 2NR
Posts: 59
Joined: January 12th, 2010, 7:36 pm

Re: The NZE Corolla Thread

Postby singh is king » December 1st, 2014, 4:59 am

singh is king wrote:



Thanks bro will keep looking bound to show up one day

if u get tru, be sure to post back...was thinking if those abs plastic can work to make the eye lids


I got in contact with the guys from car craft customs and they are charging 400 painted and installed using fiberglass. May check them for it.

fiery
Street 2NR
Posts: 40
Joined: December 18th, 2013, 4:33 pm

Re: The NZE Corolla Thread

Postby fiery » December 1st, 2014, 2:55 pm

Does anyone know where I can purchase a main WINDOW switch for the NZE corolla

User avatar
singh is king
Street 2NR
Posts: 59
Joined: January 12th, 2010, 7:36 pm

Re: The NZE Corolla Thread

Postby singh is king » December 1st, 2014, 8:13 pm

fiery wrote:Does anyone know where I can purchase a main WINDOW switch for the NZE corolla



check seenaths in the bamboo the one way down in the back rd same rd with the school

User avatar
Hibrydsoul
Sweet on this forum
Posts: 277
Joined: August 23rd, 2009, 8:13 am
Location: Pushing the limit.

Re: The NZE Corolla Thread

Postby Hibrydsoul » December 3rd, 2014, 4:18 pm

I ordered my eyelids online.... they came carbon but the carbon didn't look good as my nze is silver so I repainted them. As for the main switch, yeah check either Seenaths or D&D auto parts in bamboo #1.

User avatar
dmitc
Chronic TriniTuner
Posts: 623
Joined: December 19th, 2007, 11:02 am
Location: Barataria

Re: The NZE Corolla Thread

Postby dmitc » December 6th, 2014, 1:40 pm

Kronik wrote:
dmitc wrote:I changed the front wheel bearings on my 5yo local nze 3 mths ago.
Now it sounds as if the bearings making noise again. Is that normal for wheel bearing to go bad in such a short period of time?
And should i pay TTTL $675 a bearing to replace them with originals?


Will be doing this just now, would rather get the original bearings


Bearings going again, i'm going originals this time and i'm finding someplace else to press them in.


I'm starting to believe i'm only working to pay rent and maintain vehicle

User avatar
Ted_v2
TriniTuner 24-7
Posts: 11399
Joined: March 30th, 2010, 8:58 pm

Re: The NZE Corolla Thread

Postby Ted_v2 » December 6th, 2014, 5:37 pm

Ain't that the truth.
I wukking just to pay debt.

toyolink
3NE 2NR Power Seller
Posts: 2781
Joined: May 22nd, 2010, 11:24 am

Re: The NZE Corolla Thread

Postby toyolink » December 6th, 2014, 5:43 pm

dmitc wrote:
Kronik wrote:
dmitc wrote:I changed the front wheel bearings on my 5yo local nze 3 mths ago.
Now it sounds as if the bearings making noise again. Is that normal for wheel bearing to go bad in such a short period of time?
And should i pay TTTL $675 a bearing to replace them with originals?


Will be doing this just now, would rather get the original bearings


Bearings going again, i'm going originals this time and i'm finding someplace else to press them in.


I'm starting to believe i'm only working to pay rent and maintain vehicle

A poor installation of substitute bearings would very probably cause damage to hub shaft and installation of original bearings may be more $'s down the drain.
This could now become a real money trap (I have seen this happen too many times).

User avatar
Ted_v2
TriniTuner 24-7
Posts: 11399
Joined: March 30th, 2010, 8:58 pm

Re: The NZE Corolla Thread

Postby Ted_v2 » December 6th, 2014, 8:49 pm

Yep. Once its pressing In bad you can damage the actual hub. Would then fit the bearing slack.

There's a certain way to press in inside.
I use almost 3 tons to press in a bearing. .spin the hub while pressing it

Advertisement

Return to “TOYOTA”

Who is online

Users browsing this forum: No registered users and 11 guests