Page 1 of 1
WTK 4a-c 4speed tranny
Posted: May 11th, 2007, 7:38 pm
by Zeriam
i looking for a 4a-c(8valve) 4speed tranny was told there is 1 can anyone help me
Posted: May 12th, 2007, 11:41 am
by TRD_FACTORY
I have a 4a gearbox if yuh interested?
Posted: May 12th, 2007, 12:05 pm
by Zeriam
gears is to much work for my job but a whole conversion to gears would cost how much roughly?
Posted: May 12th, 2007, 2:57 pm
by TRD_FACTORY
You'll need the master cylinder,lines, pedal and pedal bracket !! If you firewall doesn't have the cutout for the clutch you'll have to get the hole cut!! I say probably $300-$400 in parts!! I'll give away the gearbox for $800 since I have two spare ones!! I never beileved that my 4ag geatbox would have held out so long that's why I have two spares!
Posted: May 12th, 2007, 2:58 pm
by TRD_FACTORY
You'll need the master cylinder,lines, pedal and pedal bracket !! If you firewall doesn't have the cutout for the clutch you'll have to get the hole cut!! I say probably $300-$400 in parts!! I'll give away the gearbox for $800 since I have two spare ones!! I never beileved that my 4ag geatbox would have held out so long that's why I have two spares!
Posted: May 12th, 2007, 4:32 pm
by Zeriam
would this box be swapable with a 20v also?
Posted: May 13th, 2007, 5:59 am
by TRD_FACTORY
Yes, the bellhousing is the same size so it should work!!