Moderator: 3ne2nr Mods
Brian Steele wrote:It's not just Qts, but the ratio of Fs/Qts that's important.
This driver however has only 5.5mm of Xmax. Should work ok for midbass duty (perhaps with a bit of EQ), but higher Xmax = louder midbass production without noticeable distortion. Something to consider if you're looking for the most output.
timelapse wrote:Point I forgot to mention.You going to lose some of that loudness in the doors because they going to be pointed at your feet.My 2¢.Theres a guy in the classifieds with 2 pairs of morel components.Better application in the same power range
I mistook what model was posted.My bad.threeplumes wrote:timelapse wrote:Point I forgot to mention.You going to lose some of that loudness in the doors because they going to be pointed at your feet.My 2¢.Theres a guy in the classifieds with 2 pairs of morel components.Better application in the same power range
just checked, if is the morel Maximo comps you talking about they definitely not in the same power range and application ...those are low end morel , i not doing sq rite now ....on that side of things i have already used reference dls and hybrid audio comps
timelapse wrote:I mistook what model was posted.My bad.threeplumes wrote:timelapse wrote:Point I forgot to mention.You going to lose some of that loudness in the doors because they going to be pointed at your feet.My 2¢.Theres a guy in the classifieds with 2 pairs of morel components.Better application in the same power range
just checked, if is the morel Maximo comps you talking about they definitely not in the same power range and application ...those are low end morel , i not doing sq rite now ....on that side of things i have already used reference dls and hybrid audio comps
You sound deadening?
timelapse wrote:3k for upper end cut on those beymas, and 2k cut for lower end of the tweeters?
speedmelter wrote:I have a pair of these which i tried in my doors when i was thinking along similar lines as you. They wont play the full definition of midbass by any means compared to a good true car audio midbass 6.5". Are they better than the other pro audio 6.5" that people use on their doors? IMO yes, better than any other that i have used or knowingly heard - they would play very much louder, handle more power and sound "cleaner" at high spl but if you think youre going to get magical midbass out of it, especially in a car door, just like any of those other pro audio 6.5", its a waste of good money. I took them out and went back to my component set.
threeplumes wrote:speedmelter wrote:I have a pair of these which i tried in my doors when i was thinking along similar lines as you. They wont play the full definition of midbass by any means compared to a good true car audio midbass 6.5". Are they better than the other pro audio 6.5" that people use on their doors? IMO yes, better than any other that i have used or knowingly heard - they would play very much louder, handle more power and sound "cleaner" at high spl but if you think youre going to get magical midbass out of it, especially in a car door, just like any of those other pro audio 6.5", its a waste of good money. I took them out and went back to my component set.
yeah i kinda know i won't get component level mid bass at high spl levels but i willing to try them even if i could squeeze a 20hz more on the low end band , a solid 80hz with a sharp cross i happy
Return to “I.C.E. / Car Audio Tech”
Users browsing this forum: No registered users and 27 guests