Small everyday system

casper · Postby **casper** » August 5th, 2018, 11:24 pm

nervewrecker wrote:Where you got those ring terminals btw?

I used to purchase them from edoos welding but now I buy them in bulk from Maq (loudsound). I prefer his alot more tbh

^^^ from Edoos

^^^ from Maq

Thanks for the kind compliments nick and ruffneck

Postby **nervewrecker** » August 6th, 2018, 5:33 am

Ahhh, will talk to maq if I doing over my cables.

casper · Postby **casper** » August 6th, 2018, 1:11 pm

casper wrote:not sure if to use a dsp or not

Frig it....gonna use a dsp...yolo

Postby **nervewrecker** » August 6th, 2018, 2:01 pm

Showoff

nick639v2 · Postby **nick639v2** » August 6th, 2018, 2:25 pm

Op what kind of car it is btw??

jaithon · Postby **jaithon** » August 11th, 2018, 7:59 pm

Goodnight guys, sorry to hijack this interesting thread, but where can i get ‘ northstar batteries’ & are they any better that the xspower & optima

Postby **nervewrecker** » August 11th, 2018, 8:11 pm

jaithon wrote:Goodnight guys, sorry to hijack this interesting thread, but where can i get ‘ northstar batteries’ & are they any better that the xspower & optima

Look to the north, see that star, follow it..

jaithon · Postby **jaithon** » August 11th, 2018, 8:31 pm

nervewrecker wrote:
jaithon wrote:Goodnight guys, sorry to hijack this interesting thread, but where can i get ‘ northstar batteries’ & are they any better that the xspower & optima
Look to the north, see that star, follow it..

casper · Postby **casper** » August 12th, 2018, 11:11 am

jaithon wrote:Goodnight guys, sorry to hijack this interesting thread, but where can i get ‘ northstar batteries’ & are they any better that the xspower & optima

The 3 leading battery brands worldwide atm are Full River, Northstar and XS power...not in any particular order...so yes I'd say that Northstars are better than optimas by far...to say that they're better than XS however? I not sure either brand is better than the next...both are excellent.

The local dealers for both offer 3 year warranty...only major difference is within prepping for use in the engine area...the Northstar AGM line u can drop in as is in the engine bay...it is advisable that u heat wrap the XS first before dropping it in the engine bay...where performance of both is concerned tho...both will serve u well for a very long time...

I haven't had personal experience with Full River batteries just yet but I heard some really good things about them...not sure what's the warranty on them locally and who the dealer is though

U can get Northstar from Rodney (dealer of American bass) - 350-1500

And XS power from fuzz (team2lo2flo) - 784-4284

jaithon · Postby **jaithon** » August 12th, 2018, 11:27 am

casper wrote:
jaithon wrote:Goodnight guys, sorry to hijack this interesting thread, but where can i get ‘ northstar batteries’ & are they any better that the xspower & optima

The 3 leading battery brands worldwide atm are Full River, Northstar and XS power...not in any particular order...so yes I'd say that Northstars are better than optimas by far...to say that they're better than XS however? I not sure either brand is better than the next...both are excellent.

The local dealers for both offer 3 year warranty...only major difference is within prepping for use in the engine area...the Northstar AGM line u can drop in as is in the engine bay...it is advisable that u heat wrap the XS first before dropping it in the engine bay...where performance of both is concerned tho...both will serve u well for a very long time...

I haven't had personal experience with Full River batteries just yet but I heard some really good things about them...not sure what's the warranty on them locally and who the dealer is though

U can get Northstar from Rodney (dealer of American bass) - 350-1500

And XS power from fuzz (team2lo2flo) - 784-4284

Thank you very much Casper.
There is still hope, with people like you on Tuner.
Unlike the previous idiot.

adnj · Postby **adnj** » August 13th, 2018, 8:39 pm

The performance of most main stream batteries available is typically excellent. Top dollar does not generally get you a better battery. However, spending very little normally gets you an inferior battery.

Most of the batteries that I have seen fail under warranty were because of faulty charging systems, repeated deep cycling or excessive run loads from aftermarket systems.

Here's an article from Consumer Reports that's a couple of years old. Most of the brands are well known US companies but some like Bosch and Optimal are known in Trinidad.

http://cloud.tapatalk.com/s/5b7224a2f26fd/Consumer%20Reports%202016-01%20Car%20Battery.pdf

casper · Postby **casper** » August 13th, 2018, 10:47 pm

Thanks to jusrocky for these very good quality PVC risers...gone are the days of mdf rings getting soaked and destroying over time...waterproof risers iymc now

VexXx Dogg · Postby **VexXx Dogg** » August 13th, 2018, 10:53 pm

I like those!!
how much?

casper · Postby **casper** » August 20th, 2018, 11:22 am

Extremely slow progress...but here is where I reached...board cut for enclosure lol

Postby **Dave** » August 20th, 2018, 11:34 am

Can you post a contact for jusrocky please?

Postby **nervewrecker** » August 20th, 2018, 7:34 pm

Yea, was gonna ask for that.
If I cant get hdpe I will do pvc baffles

casper · Postby **casper** » August 20th, 2018, 7:35 pm

I actually selling for him in North and West so if u all want any lemmi know car model and for what speakers

Postby **Dave** » August 20th, 2018, 7:40 pm

Can I get a contact so we can chat?

Postby **nervewrecker** » August 20th, 2018, 7:58 pm

casper wrote:I actually selling for him in North and West so if u all want any lemmi know car model and for what speakers

I want a piece of material. Will cut my own if anything.
Can get the speaker dimensions etc to have it cut if anything.

VexXx Dogg · Postby **VexXx Dogg** » August 20th, 2018, 8:47 pm

casper wrote:I actually selling for him in North and West so if u all want any lemmi know car model and for what speakers

Casper, I flying out for a few weeks.
When I get back we will link for some buzzmat plus four rings for a Vezel, 6.5 Comps and Coaxs.

casper · Postby **casper** » August 20th, 2018, 10:37 pm

VexXx Dogg wrote:
casper wrote:I actually selling for him in North and West so if u all want any lemmi know car model and for what speakers

Casper, I flying out for a few weeks.
When I get back we will link for some buzzmat plus four rings for a Vezel, 6.5 Comps and Coaxs.

No problem buddy

Postby **nervewrecker** » August 20th, 2018, 10:56 pm

nervewrecker wrote:
casper wrote:I actually selling for him in North and West so if u all want any lemmi know car model and for what speakers
I want a piece of material. Will cut my own if anything.
Can get the speaker dimensions etc to have it cut if anything.

And I prefer patronise a tuner.

casper · Postby **casper** » August 21st, 2018, 11:36 pm

Amp rack time..

Creating template for Amp board (amps being mounted in wheel well)

5/8" pvc (waterproof and lighter in weight than mdf)

Snug fit

Counter sink...using bolt with washer and tightening from under the car with a nut

Postby **Dave** » August 22nd, 2018, 11:51 am

Casper is the man!

Postby **nervewrecker** » August 22nd, 2018, 6:58 pm

Hard pong in de evo?

casper · Postby **casper** » August 22nd, 2018, 9:44 pm

Playing around with a layout

Ted_v2 · Postby **Ted_v2** » August 23rd, 2018, 5:17 am

wtf badness.

adnj · Postby **adnj** » August 23rd, 2018, 8:02 am

Where do you buy your PVC? I need a few sheets of different thicknesses for something that is completely unrelated to audio.

casper · Postby **casper** » August 23rd, 2018, 9:20 am

adnj wrote:Where do you buy your PVC? I need a few sheets of different thicknesses for something that is completely unrelated to audio.

If u want sheets let me know the thickness and size...I can get it for u

VexXx Dogg · Postby **VexXx Dogg** » August 23rd, 2018, 9:46 am

Progressss!!!
I like it.
my project will be getting some traction when I return.

Forums