TriniTuner.com  |  Latest Event:  

Forums

help with tiida alternator wiring

(I.C.E.)In Car Entertainment - Mobile Audio and Video

Moderator: 3ne2nr Mods

leondlln1
Ricer
Posts: 15
Joined: August 16th, 2010, 9:24 am

help with tiida alternator wiring

Postby leondlln1 » April 13th, 2016, 3:58 pm

need sum advive with wiring my b15 to run a tiida alt my alt has 2 wires while the tiida has 3

User avatar
Wolfstein
Sweet on this forum
Posts: 285
Joined: September 6th, 2009, 9:50 am
Location: Arima
Contact:

Re: help with tiida alternator wiring

Postby Wolfstein » May 20th, 2016, 5:00 am

I guess by now you got it wired

Creative Masterminds
Riding on 13's
Posts: 6
Joined: April 14th, 2015, 8:22 am

Re: help with tiida alternator wiring

Postby Creative Masterminds » January 28th, 2017, 7:12 pm

Will like to know how it is done......

User avatar
Ted_v2
TriniTuner 24-7
Posts: 11381
Joined: March 30th, 2010, 8:58 pm

Re: help with tiida alternator wiring

Postby Ted_v2 » January 28th, 2017, 8:37 pm

Most have 3 wires. Some have two. And some have one.

The alt has the wires labeled with a sticker.

S means signal. Need battery current via a fused link

L is the battery light. Sends positive but when the Alt bad sends negative.

Some carries a ground, mostly on older nissans.

Creative Masterminds
Riding on 13's
Posts: 6
Joined: April 14th, 2015, 8:22 am

Re: help with tiida alternator wiring

Postby Creative Masterminds » January 28th, 2017, 11:14 pm

Thanks
I am switching the alternator (qg) which is 2 pin labelled l and s to a tiida alternator which is labelled l,s and c.
Do I leave the c pin disconnected and connect the l and s?

User avatar
Jeremy09
Street 2NR
Posts: 94
Joined: October 27th, 2014, 10:17 am

Re: help with tiida alternator wiring

Postby Jeremy09 » October 26th, 2020, 2:54 pm

I need help with this currently. Do you leave out the c? Also, my l and s on the y11 is colour coded black and cream and a yellow and red..which is l and which is s

User avatar
goviboo
Ricer
Posts: 22
Joined: October 14th, 2009, 7:11 pm
Location: Rio Claro

Re: help with tiida alternator wiring

Postby goviboo » October 26th, 2020, 6:24 pm

I had to go through my notes, please note this was well over 8/9 years ago, it may or may not have changed sinceImage, I believe this should help you and the others out....
See attached.....

User avatar
Jeremy09
Street 2NR
Posts: 94
Joined: October 27th, 2014, 10:17 am

Re: help with tiida alternator wiring

Postby Jeremy09 » October 27th, 2020, 6:04 pm

On the drawing, u have 1 which represents c on the plug in for the tidda. Correct me if am wrong, the 1 goes to a ground? I did this install yesterday, connected the l and s same as your diagram and I left out the c, I got a check engine light though. My y11 just has l and s on the harness. Is c going on one of those wires on the l and s y11 harneas or should I make a designated ground for the c on the tidda?
goviboo wrote:I had to go through my notes, please note this was well over 8/9 years ago, it may or may not have changed sinceImage, I believe this should help you and the others out....
See attached.....

User avatar
goviboo
Ricer
Posts: 22
Joined: October 14th, 2009, 7:11 pm
Location: Rio Claro

Re: help with tiida alternator wiring

Postby goviboo » October 27th, 2020, 8:51 pm

I don’t think the ‘c’ pin was connected. I had it on a GA15.
The service manual doesn’t even make mention of it either.

Adjustments.JPG

User avatar
Jeremy09
Street 2NR
Posts: 94
Joined: October 27th, 2014, 10:17 am

Re: help with tiida alternator wiring

Postby Jeremy09 » October 28th, 2020, 8:50 pm

Someone told me hook the c wire to a ground. I was getting 14.2 and after putting the c to a ground it raised to 14.4..not sure if to leave it or

User avatar
goviboo
Ricer
Posts: 22
Joined: October 14th, 2009, 7:11 pm
Location: Rio Claro

Re: help with tiida alternator wiring

Postby goviboo » October 28th, 2020, 9:01 pm

I can’t remember if I tried messing with the ‘c’ pin, but 14v and above should be good. Try looking at the impact it has on your load (current) when grounding or not.

User avatar
Jeremy09
Street 2NR
Posts: 94
Joined: October 27th, 2014, 10:17 am

Re: help with tiida alternator wiring

Postby Jeremy09 » October 28th, 2020, 9:08 pm

Well yesterday I had it with the c disconnected. It started with 14.2 and when warmed up it went to 13.7. When I connected the c wire to the ground, it started 14.5 and warmed up to 13.9. The music in my car isn't heavy at all, so I bearly even get voltage drop before, but I just did the tidda alt as a precaution
goviboo wrote:I can’t remember if I tried messing with the ‘c’ pin, but 14v and above should be good. Try looking at the impact it has on your load (current) when grounding or not.

User avatar
sMASH
TriniTuner 24-7
Posts: 17790
Joined: January 11th, 2005, 4:30 am

Re: help with tiida alternator wiring

Postby sMASH » October 28th, 2020, 10:03 pm

Y12 alternator only has two wires but jack has room for three

User avatar
Ted_v2
TriniTuner 24-7
Posts: 11381
Joined: March 30th, 2010, 8:58 pm

Re: help with tiida alternator wiring

Postby Ted_v2 » November 14th, 2020, 9:41 pm

i saw a guy used this tiida on a ford ranger already, i myself might try to get one on my td27.

User avatar
Dave
3NE 2NR Moderator
Posts: 16509
Joined: April 22nd, 2003, 8:07 am
Location: playing with above and below
Contact:

Re: help with tiida alternator wiring

Postby Dave » November 14th, 2020, 9:48 pm

Tiida alternator is the answer for everyone nowadays.

Advertisement

Return to “I.C.E. / Car Audio Tech”

Who is online

Users browsing this forum: No registered users and 17 guests

cron