channel prob i think!!! lil help..

[insanelunatic]

if one of your front channel in ah 4 channel is playing low and i think iam hearing a slight distortion, what does that mean? the other front channel is playing really loud and clean.... note that the gain was left as is when testing both channels... thanks

[RawVoltage]

it means you need to go get your amp checked out. Could be the output mosfets going bad.

[nervewrecker]

Check signal cable or swap speaker wires. See if problem persists

[Wolfstein]

had this problem. it was due to a pinch in the wire and the speaker grounded out. what i did was bridge the channels and it worked. but definitely get it look at by a tech.

[insanelunatic]

thanks fellers......great info.....btw...know of a "reliable professional technician" its an an old skool 4300x us amp... dnt want ne novice digging up in it. much thanks!!

[OffshoreMarketing]

Check glen if its a 4300x dnt have a number for him though

[nervewrecker]

Are you positive its damaged?

Or does the problem occur with the other channel when the wires are swapped?

What head unit you using? Grounding off sometimes affects the head unit operation so its a quick diagnosis.

Had a speaker start playing soft on me once, everytime I hit a bump it get softer till it cut off. I actually cry thinking my new speakers f**ked. Pulled in republic bank car park in gulf view ready to scrap down and diagnose. Turns out I had something in the trunk that hit the RCA and it was sliding out bit by bit so the signal kept getting weaker and weaker till....zilch.

[insanelunatic]

problem solved!! dunno how it happened but 1 of the RCA jacks (interfire) sheit...... broke off the back of my alpine deck and I guess It was touchn slightly..... new RCA (DBlink) and worx perfect again... thank GOD it wasn't my amps... thanks for all d inputs fellers

[nervewrecker]

gremlins in the electronics.

[insanelunatic]

gremlins in the electronics.

LMAO...... dats some funny sheit, but tru!!