jemeil89 wrote:it have 2 amps but
u know the preamp out put
front / rear and sub
i'm just using front and sub to a 2 channel system output
i did some research im missin a 6sx and a eqs
if i was running this system i would hav used a different method. use the 2ch amp on the 10's, a 4 channels on the tweeters and drivers and d mono for the bass.
in terms of connections from the preamp. run the front outputs into the 4 channel playing the driver/tweets. the rear output to the 2 channel playing the 10's and the sub out to the mono playing the sub.
this way u will get more use out of the system.
wrt the epi, i personally dont like it.
depending on the deck u using u have a few options for processing.
1. if your deck has 6 (3 pairs) of rca outputs then u cud use the eqs and a 6xs.
2. if you deck has 1/2 pairs of rca outputs u can simply use a preamp and crossover. if u wanna use the audiocontrol Brand use a three.2 and a 6xs (there are other options bt i see u like AC).
3. if u using a pioneer 80prs u don't need anything else.
